Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mtw55707q0 Parts

Washer Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8578340

This is a water inlet valve that controls the flow of water into the washing machine during fill cycles. It is an electrically operated valve that opens and closes to allow hot or cold water into the tub as directed by the control board. Replace this valve if your washer is not filling with water, filling slowly, leaking from the back, or continuing to fill when it should stop.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Water would not stop running into washer.   Gary M. • Ionia , MI • March 17, 2014

Ordered this part and just changed it out. Not hard once I figured out how to get in to it. Read more

More
$134.60

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Laundry Center Anti-Rattle Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400516

Secures panels or brackets in your laundry center to prevent vibration noise. Replace missing, stripped, or worn screws to restore a tight fit.

Do-It-Yourself Stories from Customers like You No spin on spin cycle   Richard S. • Beaumont , CA • August 28, 2015

Replaced clutch assembly which was a little tricky, but very doable. Just make sure to take your time. I do have to say that I am very impressed with AppliancePartsPro customer service when the replacement part also failed. A new clutch assembly was at my door step a few days later. I now has a working washer again. Thanks Again Appliance Parts Pro. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

  • Tightens around a hose and fitting to maintain a secure seal
  • Helps stop drips, seepage, or loose connections
  • Common fix when you see moisture around a hose joint
  • Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
  • Unplug power and shut off water (if applicable) before servicing
  • Note clamp position/orientation before removal
  • Use appropriate screwdriver or nut driver to tighten evenly
  • Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$4.60

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Agitator Drive Shaft
Genuine Whirlpool part
By: Whirlpool
Part Number: WP389387

Agitator won't move or slips during wash? A worn drive shaft causes weak agitation. This shaft transfers motion from the gearcase to restore firm engagement.

Do-It-Yourself Stories from Customers like You Agitator was not turning   Edward M. • Glen Allen , VA • March 10, 2019

I had to replace the drive shaft and the lower agitator. The motor coupling was also worn out. The repair was challenging because I had to rebuild the gear box. This step was really messy and I had to wait for the liquid gasket to set prior to completing the repair. Cleaning and prep of all of the parts tripled the repair time. Read more

More
$132.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Centerpost Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546455

Supports the spin basket on the center post for smooth, quiet rotation. Replace if your washer is noisy, vibrating excessively, or has poor spin performance.

More
$18.26

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Terminal Receptacle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62889

Used for lid switch.

Do-It-Yourself Stories from Customers like You Washer was "dead" with a partially washed load and would not do anything   Jimmy M. • Hopewell , VA • September 19, 2014

Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Screw #8-18 X 5/8 Inch Type Ab
Genuine Whirlpool part
By: Whirlpool
Part Number: W11693756

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

Do-It-Yourself Stories from Customers like You Door switch on dryer.   James A. • Middleburg , FL • January 20, 2020

It was very easy to fix after watching your video.. Read more

More
$12.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Anti-Rattle Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355454

Replace your washer's anti-rattle clip to eliminate vibration noise and buzzing during cycles. Secures components with light spring tension. Confirm fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Connector Housing (3-Circuit)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2172937

This three-circuit connector housing organizes and protects terminals in an appliance wiring harness. It provides a secure, insulated plug connection to help prevent loose contacts, heat damage, and intermittent operation when the original housing is cracked or melted. What it does:

  • Holds three wiring terminals in the correct orientation for a mating connector
  • Insulates and locks terminals to reduce arcing and overheating at the plug
  • Replaces cracked, brittle, or heat-damaged connector housings
  • Symptoms can include intermittent power, burnt odor near the connector, discoloration/melting, or a plug that won't stay latched
What's included:
  • 1 three-circuit connector housing
Install notes:
  • Disconnect power before servicing the appliance
  • Note wire/terminal positions and transfer them one at a time into the new housing
  • Inspect terminals; replace any that are discolored, loose, or damaged. Use the correct crimp tool/terminals specified for your model
  • Fully seat each terminal until it locks and the connector latch engages securely

More
$13.48

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Fill Hose Rubber Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16123

Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water inlet valve was corroded and broken washer   Sandra H. • Belton , MO • June 26, 2015

Replaced with new part ordered from store Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Lid Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP54583

Right hand side. For screws use WPW10119828.

Do-It-Yourself Stories from Customers like You Whirlpool washer   David L. • Linn , MO • August 31, 2015

With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more

More
$19.50

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10846509

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

  • Loose or detached rear bulkhead allowing side-to-side play
  • Excessive noise and shaking felt through the surrounding walls   
  • Development of micro-cracks around screw holes over time
  • Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool direct drive washer major repair drive/brake assembly clutch suspension outer tub etc   Carter H. • Oak Ridge , TN • July 11, 2015

Watched several repair videos on YouTube produced by AppliancePartsPros.com for this model Whirlpool washer (videos quite well done). Purchased parts from AppliancePartsPros.com; order correctly filled and parts arrived by FedEx within two working days. Performed repairs as instructed. "Plastic welded" holes in poly outer tub using similar plastic (PP) using a cheap soldering iron - worked perfectly, saved >$150 for new tub. Washer now like brand new. Suggestion - buy the spanner wrench,... Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP273556

Size: 10-16 x 5/8 inch.

Do-It-Yourself Stories from Customers like You Console screws were rusty and the other screw was broken.   Denis C. • Baltimore , MD • June 20, 2018

I used a screwdriver and removed all three screws and replaced them with ones I ordered from you. The job took less than ten minutes to complete. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Timer Control Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10110027

This knob attaches to the timer shaft on the washer control panel, allowing you to select wash cycle settings. It typically pushes or clips onto the timer stem. Replace this knob if it is cracked, the D-shaped shaft connection is worn out, or it spins freely without engaging the timer.

Do-It-Yourself Stories from Customers like You The problem i had was with the timer knob it broke off   Raymond M. • Durango , CO • November 13, 2014

I ordered the knob from Appliance Parts Prospect cause they had the best price. The part came on the day I was told and I installed the part in less than 5 minutes. Works excellent. Read more

More
$52.68

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Wiring Harness Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016

Used from harness to top.

Do-It-Yourself Stories from Customers like You A broken lid switch on my whirlpool stackable twin washer   Joseph P. • Indialantic , FL • October 25, 2016

Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I... Read more

More
$7.44

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Gasket Sealer Adhesive
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195

This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.

More
$64.70

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google