Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mvwc360awo Parts

Washer Adjustable Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: W10739673

Adjustable leveling leg screws into washer base to stabilize and level your machine on uneven floors. Replace worn, missing, or damaged legs for stability.

Do-It-Yourself Stories from Customers like You The washer was shaking badly during the spin cycle   David W. • Sarasota , FL • November 27, 2018

I replaced the drive block & leveling feet, it helped a lot but the washer still shakes a lot, I am now going to try replacing the suspension rod kit, These were the most recommended fixes to the problem.The repairs were not too hard, I wish I had a spanner wrench, I couldn't find it on the website. Read more

More
$11.78

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10846509

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

  • Loose or detached rear bulkhead allowing side-to-side play
  • Excessive noise and shaking felt through the surrounding walls   
  • Development of micro-cracks around screw holes over time
  • Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool direct drive washer major repair drive/brake assembly clutch suspension outer tub etc   Carter H. • Oak Ridge , TN • July 11, 2015

Watched several repair videos on YouTube produced by AppliancePartsPros.com for this model Whirlpool washer (videos quite well done). Purchased parts from AppliancePartsPros.com; order correctly filled and parts arrived by FedEx within two working days. Performed repairs as instructed. "Plastic welded" holes in poly outer tub using similar plastic (PP) using a cheap soldering iron - worked perfectly, saved >$150 for new tub. Washer now like brand new. Suggestion - buy the spanner wrench,... Read more

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Wiring Harness Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016

Used from harness to top.

Do-It-Yourself Stories from Customers like You A broken lid switch on my whirlpool stackable twin washer   Joseph P. • Indialantic , FL • October 25, 2016

Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I... Read more

More
$7.44

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Lid Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP91770

Right hand side

Do-It-Yourself Stories from Customers like You Lid was rusted bad   Mike S. • San Lorenzo , CA • December 06, 2016

New parts easy fix Read more

More
$17.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Start/Stop Push Button
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251309

This is a push button switch used to start and stop the wash cycle on a washing machine. It mounts on the control panel and engages the machine's control circuit when pressed. Replace this button if it feels loose, does not click properly, or the washer fails to start or stop when pressed.

Do-It-Yourself Stories from Customers like You Start/pause rubber button was worn out.   Loretta B. • El Cajon , CA • August 31, 2020

Replaced the rubber button. Read more

More
$51.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Drip Tray
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212526

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

More
$67.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Gasket Sealer Adhesive
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195

This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.

More
$64.70

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Cycle Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285511

Fix unresponsive or erratic cycle selection with this rotary encoder switch. Mounts behind the control knob to restore accurate cycle settings and indicators.

More
$91.23

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Appliance Machine Screw (8-18 Thread)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533928

Machine screw that secures panels, brackets, and components in appliances. Replace when worn, stripped, or missing to restore tight fit and stability.

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Appliance Hardware Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: 285448A

Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.

Do-It-Yourself Stories from Customers like You Wash machine water inlet valve   Larry E. • Coleharbor , ND • February 18, 2017

Watched a video online, the project took about 20 minutes, went well, parts fit good, the video was very helpful in getting the wash machine up and running. Read more

More
$5.34

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Dryer drum completely wore off all coating   Larry W. • Ubly , MI • July 01, 2016

Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more

More
$58.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Fill Hoses Hot And Cold 2-Pack 5 Ft
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212545RP

Connect hot and cold water faucets to your washer's inlet valves with this 2-pack of 5-foot fill hoses. Replace aging, cracked, or leaking supply lines.

Do-It-Yourself Stories from Customers like You Whirlpool Cabrio displayed lf would not complete a wash cycle.   Brandy H. • Colorado Springs , CO • August 25, 2020

Purchased water inlet valve and new hot and cold water hoses. Unscrewed about 5 screws that were holding the top of the washer in place then slide the top forward and up. Released the control top it popped off no screws. Disconnected the wires attached and unscrewed 2 screws holding the valve in place the popped that off. Popped in a new valve and repeated the process in reverse. Boom done! Very simple works like new! Read more

More
$38.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Screw (7-2-1)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249633

This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does

  • Fastens trim, panels, brackets, or internal assemblies to keep parts secure
  • Helps stop vibration-related noise from loose components
  • Restores correct mounting where the original screw is missing or damaged
  • Matches the form and fit of the OEM fastener for intended attachment points
What's included
  • One replacement 7-2-1 screw
Install notes
  • Use the correct driver to avoid stripping the screw head
  • Hand-start threads before tightening to prevent cross-threading
  • Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
  • Disconnect power to the appliance before accessing internal areas

Do-It-Yourself Stories from Customers like You Gear assembly was bad   Lewis S. • Cumming , GA • November 06, 2018

Replaced it with a new gear housing assembly. It was some what difficult removing the spindle hub. Read more

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Timer Control Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10317454

This is the control knob that attaches to the timer shaft on the dryer's control panel, allowing you to select and start drying cycles. It is typically made of plastic with a D-shaped or splined center that fits onto the timer stem. Replace this knob if it is cracked, broken, loose, or if the flat edges inside the knob are worn and no longer grip the timer shaft properly.

Do-It-Yourself Stories from Customers like You Broken knob   John M. • Lewisburg , TN • October 08, 2018

Replaced it. Read more

More
$52.68

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W10520038

Fix a washer that won't advance cycles, stops mid-cycle, or has no lights with this main electronic control board. Controls timing and functions.

More
$224.76

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google