Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mvwx500xw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer Fill Hoses 5 Ft 2-Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212487RP

Two 5-foot nylon braided hoses connect household water supply to washer inlet valves. Replace cracked, leaking, or aging hoses to prevent water damage.

Do-It-Yourself Stories from Customers like You Water inlet was obstructed   Jessica C. • Mount Shasta , CA • April 15, 2018

Watched u tube video. Ordered replacement water inlet valve and new hoses. Dismantled washer and replaced defective valve and installed new hoses. The repair went very easily and the washer worked perfectly as a result. Read more

More
$44.23

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Fill Hose Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212638RP

Contains two, six foot long braided hoses with 90 degree ends.

Do-It-Yourself Stories from Customers like You Kenmore fh error code   Michael H. • Cataula , GA • January 18, 2015

I had a problem with the drain pump on my Kenmore HE3 and I replaced it using a drain pump I ordered from APP. That fixed that problem but once I started running the washer I started getting a FH error code. I looked it up and found that it was a problem with the washer not filling properly. I pulled the washer out and found that one of the fill hoses had kinked when I pushed the washer back in place. There was also some writing on the hose that read "Change hose every five years". I know I had... Read more

More
$52.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Adjustable Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: W10739673

Adjustable leveling leg screws into washer base to stabilize and level your machine on uneven floors. Replace worn, missing, or damaged legs for stability.

Do-It-Yourself Stories from Customers like You The washer was shaking badly during the spin cycle   David W. • Sarasota , FL • November 27, 2018

I replaced the drive block & leveling feet, it helped a lot but the washer still shakes a lot, I am now going to try replacing the suspension rod kit, These were the most recommended fixes to the problem.The repairs were not too hard, I wish I had a spanner wrench, I couldn't find it on the website. Read more

More
$11.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10846509

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

  • Loose or detached rear bulkhead allowing side-to-side play
  • Excessive noise and shaking felt through the surrounding walls   
  • Development of micro-cracks around screw holes over time
  • Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool direct drive washer major repair drive/brake assembly clutch suspension outer tub etc   Carter H. • Oak Ridge , TN • July 11, 2015

Watched several repair videos on YouTube produced by AppliancePartsPros.com for this model Whirlpool washer (videos quite well done). Purchased parts from AppliancePartsPros.com; order correctly filled and parts arrived by FedEx within two working days. Performed repairs as instructed. "Plastic welded" holes in poly outer tub using similar plastic (PP) using a cheap soldering iron - worked perfectly, saved >$150 for new tub. Washer now like brand new. Suggestion - buy the spanner wrench,... Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Hose Connector Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285835

Connects washer drain hose to extension hose. Includes coupling and clamps. Replace if cracked, broken, or when extending drain hose length to reach pipe.

Do-It-Yourself Stories from Customers like You Washer drain hose not long enough   Ray P. • Frankfort , IL • February 07, 2016

I ordered the drain extension kit and the hose connector kit. Read more

More
$37.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853898

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

  • Rear panel detaching from frame opening gaps
  • Increased noise and vibrations from a compromised seal  
  • Stress on other connections from improper mounting points
  • Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Wiring Harness Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016

Used from harness to top.

Do-It-Yourself Stories from Customers like You A broken lid switch on my whirlpool stackable twin washer   Joseph P. • Indialantic , FL • October 25, 2016

Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I... Read more

More
$7.44

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drip Tray
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212526

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

More
$67.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Gasket Sealer Adhesive
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195

This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.

More
$64.70

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Refrigerator Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10238319

Factory mounting screw secures door closers, panels, and brackets in refrigerators and laundry centers. Replace stripped, missing, or rusted screws.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Control Knob (Plated Finish)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251384

This plated control knob replaces a worn or missing knob on your range or cooktop, restoring smooth burner adjustment and a matching look. It pushes onto the existing control stem and operates like the original. What it does:

  • Mounts on the burner control stem to set and adjust heat levels
  • Replaces cracked, stripped, loose, or missing knobs to restore proper control
  • Provides clear pointer orientation for consistent settings
  • Symptoms it can help with: knob falls off, wobbly/loose feel, hard to turn, won't engage
What's included:
  • One plated control knob assembly
Install notes:
  • Disconnect power and let the cooking surface cool; if applicable, turn off gas supply.
  • Pull the old knob straight off the stem—avoid prying or side pressure that can damage the shaft.
  • Align the new knob with the stem and press straight on until fully seated.
  • Test the control for smooth operation before regular use.

More
$51.62

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Machine Screw (8-18 Thread)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533928

Machine screw that secures panels, brackets, and components in appliances. Replace when worn, stripped, or missing to restore tight fit and stability.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Hardware Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: 285448A

Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.

Do-It-Yourself Stories from Customers like You Wash machine water inlet valve   Larry E. • Coleharbor , ND • February 18, 2017

Watched a video online, the project took about 20 minutes, went well, parts fit good, the video was very helpful in getting the wash machine up and running. Read more

More
$5.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Dryer drum completely wore off all coating   Larry W. • Ubly , MI • July 01, 2016

Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more

More
$58.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Fill Hoses Hot And Cold 2-Pack 5 Ft
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212545RP

Connect hot and cold water faucets to your washer's inlet valves with this 2-pack of 5-foot fill hoses. Replace aging, cracked, or leaking supply lines.

Do-It-Yourself Stories from Customers like You Leaking water from center bottom of machine   Thomas N. • Pleasant Mount , PA • April 05, 2026

- Didn't see any other leaks in machine. No grinding transmission noise. Assumed seal on transmission shaft was bad, since it was a central leak down the rotor. It was a little more difficult to dissemble than the video showed, but not too bad. Got it all back together and seems to be working well. No leaks yet. Didn't need washer in parts diagram - was already on the transmission. Also the drain pump filter was not necessary, it can just be cleaned. Read more

More
$38.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google