Neptune Parts

This replacement energy guide is a molded plastic trim piece that helps route or protect wiring and components in the appliance, keeping parts aligned and reducing wear. It restores proper fit and appearance where the original guide is damaged or missing. What it does:

• Positions and secures wiring or small components to prevent chafing and interference
• Maintains correct spacing between parts to avoid rubbing or misalignment
• Helps preserve factory airflow and component clearance where installed
• Reduces vibration noise by holding items firmly in place

• One molded plastic energy guide

• Intended to snap or fasten into existing mounting points; orientation before seating
• Use basic hand tools to remove nearby panels if needed; keep fasteners organized for reassembly
• Disconnect power to the appliance before starting work and follow all safety precautions
• If clips or screws are broken, replace them with OEM hardware for a secure fit

The Dryer Drum Roller Axle is an OEM part for Whirlpool dryers. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle. 

Causes of a bad Dryer Drum Roller Axle can include prolonged use leading to wear and tear, accumulation of lint and debris causing additional friction, or improper loading of the dryer drum which can bend or strain the axle.

Symptoms of a bad Dryer Drum Roller Axle include:

• Unusual noises, such as squeaking or grinding, during the operation
• The dryer drum struggling to turn or not turning at all
• Increased vibration or shaking of the dryer unit
• Clothes taking longer to dry or not drying evenly

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Trim piece that conceals the door hinge and mounting screws. Replace your cracked, broken, or missing hinge cover to restore a clean finished look.

Male piece. For both male and female piece use LA-1003

Retaining clip secures the front panel to the cabinet sides on washers and washer-dryer combos. Replace when clip is broken, missing, or won't hold panel.

Filters debris and sediment from incoming water before it reaches the inlet valve. Replace if clogged or missing to restore proper fill flow. Confirm fit.

This is a Whirlpool washer control board. This is the main control board behind the user interface, not to be confused with the motor control board located within the body of the washer. This part controls the main functions of the washer and toggles between different cycles. Certain functions may become unavailable intermittently when the main control board loses function. The washer may also continue to spin, not following the regular timeline of the cycle.Start the repair by pulling the control knob from the front of the washer. Pull the washer out from the wall to access the rear panel. Remove the screws from the back panel, and push back on the control panel while sliding a flat head under the right corner to release the mounting clip. Repeat this on the left side, and the central console should pull free. Release the clips for the wire harness and remove the air hose from the control board. Remove the mounting screws and pull the control board from its protective console. Reverse this process to install the new component.This product is a genuine OEM part sourced directly from the manufacturer. This part is compatible with Whirlpool, Maytag, and JennAir appliances.

This spring support secures a suspension spring to the washer's frame, helping keep the tub stable during wash and spin. Replacing a damaged support restores proper balance control to reduce vibration and banging. What it does:

• Anchors a suspension/tub spring to the cabinet or base
• Helps control tub movement and maintain alignment during spin
• Failure can cause excessive vibration, banging, off-balance shutdowns, or a leaning tub
• Visible cracks, bent tabs, or a detached spring indicate the support needs replacement

• 1 spring support

• Disconnect power and turn off water before servicing
• Support the tub and carefully relieve spring tension before removing the old support
• Transfer the spring to the new support and install in the original location/orientation
• Wear gloves and eye protection; springs are under tension

This hinge screw fastens a hinge to the appliance cabinet or door, helping keep the door aligned and operating smoothly. Replace a missing or stripped screw to restore solid hinge support and reliable closure.

• Secures the hinge to the cabinet/frame or door
• Maintains proper alignment at the hinge point
• Helps ensure smooth opening/closing and effective sealing where applicable
• Common symptoms: loose or wobbly hinge, door sagging/misaligned, poor closure/seal, rattling, or a missing/stripped fastener

• Disconnect power to the appliance; shut off gas if applicable
• Support the door to relieve hinge load before removing or installing screws
• Use the correct driver for your model to avoid stripping fasteners
• Start threads by hand and tighten snugly; do not overtighten