Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Pgs688semss Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Screw
Genuine Ge part
By: Ge
Part Number: WB1M1

ST10-16 X 7/16"

Do-It-Yourself Stories from Customers like You Bottom heating element not working on a ge electric range   David K. • Portsmouth , RI • December 21, 2014

Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more

More
$9.48

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Oven Rack
Genuine Ge part
By: Ge
Part Number: WB48X21508

Flat wire shelf that slides into your oven's side supports to hold bakeware at the correct height. Replace if bent, warped, or missing a rack position.

More
$53.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WR01X10789

This screw is a genuine General Electric part, sold individually. This screw can be used as a replacement part for a refrigerator. A screw can suffer damage in the lifespan of a refrigerator. It can also be easily lost or misplaced. Screws are small parts and are usually installed in multiples to ensure components are reliably attached, so one screw loosening or going missing might not necessarily affect the operability of the refrigerator. However, if the components loosen or the screw suffers damage that strips the part, such as punctures or erosion to the metal material from general wear and tear or from a direct impact, the screw should be removed and replaced with this genuine OEM replacement part. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following appliance brands: General Electric, Hotpoint, RCA, and Americana.

Do-It-Yourself Stories from Customers like You We had multiple broke slides. I had put too much weight on the shelves.   Colleen M. • Carnegie , PA • April 05, 2021

I ordered the new slides for the shelves, the order came in a couple of days. All parts were there. The husband installed new slides and bearings in about 20 minutes with minimal effort. He said the hardest part was contorting his torso to be able to use the screwdriver. All good thank you. Read more

More
$14.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Refrigerator Power Cord Assembly
Genuine Ge part
By: Ge
Part Number: WR23X10300

Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.

Do-It-Yourself Stories from Customers like You Power cord needed to be replaced   Jorge V. • Tucson , AZ • November 14, 2015

Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more

More
$22.35

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Cooktop Grate Support Stud
Genuine Ge part
By: Ge
Part Number: WB02T10453

Composite support stud mounts on your cooktop to provide a stable resting point for the burner grate. Replace if cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Screw head broke of handle   Ward B. • Conway , AR • August 27, 2025

Ordered the 3 parts that hold the handle to the glass. Replacements fit perfectly and the repair only took 10 minutes to complete. Read more

More
$6.72

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Refrigerator Crisper Drawer Support Assembly
Genuine Ge part
By: Ge
Part Number: WR02X13504

Holds and guides the crisper drawer for smooth operation. Replace if cracked, broken, or causing drawer misalignment. Mounts inside the refrigerator cavity.

Do-It-Yourself Stories from Customers like You Side brackets had broke   Andrew O. • Alexander , NC • December 23, 2025

Ordered this shelf and swapped it out Read more

More
$13.73

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Refrigerator Air Tower Assembly
Genuine Ge part
By: Ge
Part Number: WR17X12456

Fridge running warm or uneven temps? This air tower assembly channels cold air through the refrigerator. Restores proper airflow and consistent cooling.

Do-It-Yourself Stories from Customers like You The temperature in the freezer was 6 and the temperature in the refrigerator would go to 48 the evap coil wasn't defrosting   Dennis W. • Elkhart , WI • June 29, 2019

After checking the defrost heater to confirm it was ok. I replaced the main electronic board. That wasn't it. After 1 1/2 weeks, it frosted up again. I called and talked to a tech person at APP and then ordered the air tower, defroster thermostat, and temp sensor. I installed them all and the frig works great. I know replacing all those parts at once didn't confirm which one failed, but I just wanted it fixed. The cost was less than having a service call. The parts arrived the day after... Read more

More
$164.69

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ice Maker Assembly (Refrigerator)
Genuine Ge part
By: Ge
Part Number: WR30X28693

This refrigerator ice maker assembly freezes water and automatically ejects cubes into the bin. Replacing a failed unit restores steady, hands-free ice production and helps resolve common ice maker cycling and cube-ejection issues.

  • Freezes water in its mold, then harvests and drops finished cubes into the ice bin
  • Controls fill and harvest timing for consistent cube production
  • Typical failure symptoms: no ice production, unit stuck mid-cycle, cubes not ejecting, or loud clicking/grinding from the drive
  • Works with the refrigerator's controls to pause ice making when the bin is full
What's included: Ice maker assembly. Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Remove the ice bin and any covers; unmount the old ice maker and disconnect its wiring harness
  • Transfer any brackets, covers, or guides from the old unit if needed
  • Mount the new assembly, reconnect wiring, restore power/water, and allow up to 24 hours for full ice production
Tip: Check the water inlet valve and the fill tube for blockages or ice.

Do-It-Yourself Stories from Customers like You Ice maker stopped working   Sean L. • Tavares , FL • August 05, 2018

The ice maker stopped producing ice. The motor just made a periodic spinning noise and the ice maker never filled with water. I ordered a replacement ice maker and the valve just in case. I just ended up replacing the ice maker, which is just two screws and a plug. A couple hours later, the new Ice maker was making ice as good as new. Read more

More
$126.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Gas Range Burner Valve
Genuine Ge part
By: Ge
Part Number: WB21X20471

Fix a burner that won't turn off or has a stiff knob with this gas range burner valve. Controls gas flow to individual burners. DIY repair takes 1-2 hours.

Do-It-Yourself Stories from Customers like You Knob was not turning gas off, burner valve was stripped/broken   Adam B. • Natick , MA • February 19, 2021

Identified likely broken part (burner valve) on appliance blow out diagram. Ordered part and it arrived next business day which was great. DIY fix took about 1.5hrs, mostly because of disassembly/reassembly of range top. Read more

More
$30.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Burner Cap (Grey)
Genuine Ge part
By: Ge
Part Number: WB29K10007

Large. Color: Grey. It measures about 3-1/2 inches in diameter.

Do-It-Yourself Stories from Customers like You Burner caps became chipped on edges   Peter B. • Green Brook , NJ • March 06, 2015

Replaced the caps Read more

More
$38.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Cooktop Burner Cap Kit
Genuine Ge part
By: Ge
Part Number: WB29X36765

Black burner cap kit for gas cooktops. Replaces cracked, worn, or corroded caps. Restores appearance and protects burner assembly. Includes caps only.

Do-It-Yourself Stories from Customers like You Just wanted to stove to look more like brand new   James J. • Summerfield , FL • February 14, 2015

Physical appearance by replacing burner caps and burner grate. My wife is a cleaning machine. Only probelm is the grates and caps get slight burn marks on them that are hard to clean. I may try your ceramic cleaner to see if that works better than elbow grease. Read more

More
$30.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Gas Range Grate Assembly
Genuine Ge part
By: Ge
Part Number: WB31X28755

Replacement grate assembly for gas range cooktops. Provides stable cookware support above burners. Order if your grate is cracked, broken, or missing.

More
$111.64

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Gas Range Burner Head (Auxiliary)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10406243

Auxiliary burner head for gas ranges and cooktops. Mounts over the orifice to distribute gas through precision ports. Replace if clogged or damaged.

More
$28.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Plunger Switch
Genuine Ge part
By: Ge
Part Number: WB24X27550

The Plunger Switch is an OEM part for GE gas ranges. It is an electro-mechanical component that activates the burners and bake/broil modes when the oven door is securely closed.

Causes of failure include worn contact points, damaged wiring, or defective internal components.  

Symptoms of a bad plunger switch include:

  • Inability to select oven cooking functions when door is closed
  • Error messages related to unsafe door conditions  
  • Random activation of burners with door open 
  • Failure of door interlock safety feature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

More
$10.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Burner Cap (Grey)
Genuine Ge part
By: Ge
Part Number: WB29K10004

Medium. Color: Grey. It measures about 3 inches in diameter.

Do-It-Yourself Stories from Customers like You Burner caps became chipped on edges   Peter B. • Green Brook , NJ • March 06, 2015

Replaced the caps Read more

More
$40.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Anti-Tip Bracket Assembly
Genuine Ge part
By: Ge
Part Number: WB02T10578

Secures your range to the floor or wall to prevent forward tipping. Replace if bracket is bent, broken, or missing during appliance relocation.

More
$36.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google