Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer. Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing. Symptoms of a bad handle include:
This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
My side by side fridge was not defrosting, and then would freeze up, and have to be manually defrosted, ordered new defrost heater, for my fridge, as well as a few other small parts for future service, this company ships OEM parts, very fast, they have a lot of chop, chop, replaced failed defrost element and all is well. thanks a.p. pros. Read more
The Snack Pan is an OEM part for GE refrigerators. It is designed to provide an organized space for storing snacks and small food items within the refrigerator, keeping them easily accessible and fresh.
You should replace the snack pan if it becomes cracked, warped, or otherwise damaged. Common causes of a bad snack pan include regular wear and tear, overloading the pan, or accidental impact that leads to breaks or fractures.
Symptoms of a bad snack pan include:
My fridge's meat drawer (the drawer with "Deli Fresh" on it) became cracked on the front and needed to be replaced. It took quite a while of looking at this website's diagrams to figure out that what I needed to order is called "Pan ASM Top." Drawer arrived in 2 days, and all I had to do was remove the old drawer and slide in the new one. It's a little tricky -- check the fridge's instruction manual if you need to. Read more
The Base Grille is an OEM component for GE bottom-mount refrigerators. It functions as the aesthetic frame surrounding the condenser coils and fan at the base. The base grille works to contain stored cold and hot air within the refrigeration system.
Symptoms of a bad base grille include:
Over many years, repeated vacuuming can weaken mounting tabs while physical impacts compromise integrity. Proper evaporator function relies on controlled air circulation. Repairing air leaks maintains energy efficiency.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore bottom-freezer models.
Replaced two drawers, one shelf front, and the grille base Read more
The GE Refrigerator Water Filter Housing and Tube Assembly is an OEM part for GE refrigerators. It houses the water filter and connects it to the water supply line, ensuring clean and filtered water is dispensed.
Common causes of a bad housing and tube assembly include cracks or breaks from wear and tear, exposure to high water pressure, or damage during filter changes.
Symptoms of a bad water filter housing and tube assembly include:
After changing water filter, flow came to a stop. Would chatter without any water. Confirmed I had flow from the wall supply to the fridge as I broke the water line at the union and let run into a bucket. Then I removed the water filter housing and tube assembly after reconnecting supply. Now the water was only circulating from the wall to the filter housing to the bucket. No flow and chatter was present. I did this to rule out a frozen reservoir. Really simple fix. Was able to remove... Read more
This helix lock plate secures the ice bucket auger (helix) in the dispenser assembly so ice can move reliably to the chute. Replacing a worn plate restores positive drive and helps reduce jams, slippage, and grinding noises. What it does:
I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more
The Solenoid Valve Kit is an OEM part for GE refrigerators. This kit includes the solenoid valve, which is responsible for regulating the flow of refrigerant in the cooling system.
Causes of a bad solenoid valve kit include electrical malfunctions, physical damage, refrigerant leaks, or general wear and tear over time.
Symptoms of a faulty solenoid valve kit:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
The Dispenser Drip Tray is an OEM part for GE refrigerators. It serves as a catchment area for any drips or spills that may occur during the dispensing process. It helps prevent water or ice from dripping onto the floor or making a mess on the front of the refrigerator. For white order WR17X11654.
Causes of a faulty or damaged dispenser drip tray can include regular use, accumulation of debris, or cracks. These factors can result in issues such as water or ice leaking onto the floor, an unsightly appearance, or difficulties in cleaning and maintenance.
Symptoms of a bad dispenser drip tray may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Watched your videos and easily replaced the solenoid, spring, flapper etc. The only reason it took me as long as it did is I have a GE monogram side-by-side in cabinet refrigerator. It is stainless steel and required me to take off all of the stainless steel skin on the freezer side door. While this was not that difficult it was time-consuming. Read more
The Evaporator Drip Pan is an OEM part for GE refrigerators. This pan collects condensation and defrost water, preventing leaks and water damage to your kitchen floors.
Causes for replacement often stem from physical damage, such as cracks or holes that allow water to leak out. Over time, the drip pan may also become brittle and more susceptible to damage due to the constant exposure to moisture and temperature fluctuations.
Symptoms of a bad Evaporator Drip Pan include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Suspected a clogged condensation drain line. Took out all the shelves and drawers, condensation unit is toward the bottom of the frdige on inside, I could see that there was ice build up. I unplugged fridge, placed fan in firdge to speed up the thawing of the built up ice. After ice melted enough, I could get face panels and foam off to see that icing caused a backup in drain line, which led to water sitting in trough pan, rusting the trough pan. Rust then accumulated in the drain line,... Read more
The Auger Nut is a genuine OEM component for GE refrigerators. Located within the icemaker assembly, this nut secures the auger shaft that transports ice from the molding trays to the ice bin. Symptoms of a bad auger nut include:
Causes can include wear from the continuous rotational movement of each harvest cycle. Over time, the threading may become stripped or warped from repeated heating/cooling. This genuine GE OEM replacement part is also compatible with Profile, Monogram, and some Kenmore models.
The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerator or freezer door is closed
Over time, the door light switch can wear out or fail due to frequent use, exposure to moisture, or electrical issues. When this happens, the interior light may not function correctly, which can hinder visibility inside the refrigerator.
Symptoms of a bad door light switch may include:
This switch is compatible with select GE and Hotpoint models.
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
The Middle Drawer Assembly is an OEM part for GE refrigerators. This drawer provides additional storage space, typically for fruits, vegetables, or deli items, helping to organize and maximize the refrigerator’s interior space.
Causes of a bad middle drawer assembly can include wear and tear from regular use, cracks or breakage from overloading, or accidental impacts.
Symptoms of a bad middle drawer assembly include:
I shopped around to find the best prices and at the same time, the most reliable live/ via phone assistance in being sure I got exactly the right parts. Your guy was great and the parts were shipped promptly. So there was no "repair!" Simply pulled out the old drawers, and put them in the recycle can! Nw ones slid right into place. I also noticed the new ones had sturdier "stops" at the back edge of the drawers. Suspect this was a common complaint and replacement. Read more
The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the user's ability to fine-tune the temperature and humidity levels, ensuring that the food stored inside remains fresh and well-preserved. For the same part in white, purchase WR11X10007. Over time, the lever assembly may become worn or damaged due to regular use, accidental impacts, or environmental factors such as extreme temperatures or humidity. Symptoms of a bad Fresh Food Lever Assembly include:
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
The Rear Refrigerator Wheel is an OEM replacement part for GE refrigerators. This wheel is attached to the bottom rear of the refrigerator, facilitating easy movement of the appliance for cleaning, maintenance, or repositioning. It is designed to support the weight of the refrigerator while ensuring smooth and stable mobility. Symptoms of a bad Rear Refrigerator Wheel include:
Causes for a malfunctioning Rear Refrigerator Wheel can include wear and tear from regular movement, damage due to excessive weight or impact, or issues with the axle or mounting hardware that secure the wheel in place.
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
The Fresh Food Door Closure Cam is an OEM replacement part for GE refrigerators. It is a component located inside the fresh food door that works together with the door latch mechanism. The door closure cam has a pivoting arm that engages the latch to securely fasten the door shut when closed. For the same part in white, purchase WR02X10637.
Causes of failure include wear and tear over time from repeated usage, damage due to accidental mishandling of the door, or an impact that causes misalignment of the cam.
Symptoms of a bad door closure cam include: