Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Shelf Slideout is an OEM part for GE freezers. It is designed to provide convenient and organized storage within the freezer compartment, allowing easy access to stored items. The slideout feature enables users to pull the shelf forward, making it simpler to reach items stored at the back.
Causes of a bad shelf slideout can include cracks or breaks due to heavy loads, frequent usage leading to wear and tear, or damage from mishandling during cleaning or rearranging.
Symptoms of a bad shelf slideout include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered it by telephone which followed up to a call in the afternoon at 7:30 pm on a Sat. Very impressive. Put in shelf. no problems. Read more
The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It forms an air-tight seal around the fresh food door preventing air and moisture exchange between the refrigerator interior and exterior. The gasket helps to maintain the ideal temperature and humidity levels inside for optimal food storage. Causes of a bad gasket can include cracks, tears, or worn-away sections compromising the air-tight seal over time. Exposure to heat, moisture, or chemicals during cleaning may also degrade sealing qualities. Symptoms of a bad gasket include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more
This air damper assembly regulates the flow of cold air from the freezer into the refrigerator compartment to keep temperatures even. Replace a stuck or broken damper to restore proper cooling and prevent warm spots or food freezing.
It started with clicking sounds for about 10 seconds at random times throughout the day. eventually the clicking sounds were gone and the temperature in the fresh food section was dropping below freezing. Turns out that one of the 3 damper doors was stuck open. My fridge has a damper door in the top left and 2 doors in the bottom left. One of the bottom doors was dedicated to the quick chill drawer which hadn't worked in some time. but since the quick chill door was stuck closed it did not... Read more
The Ice Maker Fill Tube Grommet is an OEM part for GE refrigerators. This grommet creates a seal between the ice maker fill tube and the refrigerator, preventing leaks and ensuring that water is properly directed into the ice maker during the filling process.
Causes of a bad grommet can include regular wear and tear, damage from exposure to freezing and thawing cycles, or degradation from exposure to water and moisture.
Symptoms of a bad ice maker fill tube grommet include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more
The Grommet and Gasket Assembly is an OEM part for GE refrigerators. It is designed to create a secure seal around various refrigerator components, preventing air leaks and ensuring efficient operation. This assembly typically includes both the grommet and gasket, which work together to maintain the refrigerator's internal temperature and prevent moisture and contaminants from entering.
You should replace the grommet and gasket assembly if it becomes worn out or damaged. Causes of a bad grommet and gasket assembly can include regular wear and tear, exposure to temperature fluctuations, or physical damage that leads to cracks or deformities. A compromised seal can result in inefficient cooling and increased energy consumption.
Symptoms of a bad grommet and gasket assembly include:
With new hose Read more
The Ice Deflector Spring is an OEM replacement part for GE refrigerators. This spring is a crucial component of the ice dispensing system, specifically in selecting between crushed and whole ice cubes. It is designed to always force the diverter back in a way that the cubes get crushed. When whole cubes are selected, the solenoid pulls the lever against the spring’s tension to shift the configuration, allowing cubes to bypass the crusher blades.
Causes for a malfunctioning Ice Deflector Spring can include wear and tear from regular use, corrosion due to constant exposure to moisture, or mechanical failure that prevents it from effectively reverting the diverter to the crushed ice configuration.
Symptoms of a bad Ice Deflector Spring include:
When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more
Color: Black
I replaced the lever asm. and spring Read more
The Glide Bracket is an OEM part for GE refrigerators. This left bracket supports the refrigerator drawer, allowing it to slide in and out smoothly for easy access to stored items.
Causes of a bad glide bracket can include regular wear and tear, damage from overloading the drawer, or accidental impact that causes the bracket to crack or break.
Symptoms of a bad glide bracket include:
The hinge broke on the ice dispenser funnel and housing. I took them off and replace them, putting the old switches and bulb in the new housing. It took some time to put the return spring back because it does not appear in the assembly diagram. Once working, it secures to the door with 4 screws, and worked as it should. The support slide inside the freezer is held with two 1/4 in screws that were taken off with a nut driver. the rear screw is hard to get at. The new bracket just screws on, and... Read more
This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
The Water Valve and Bracket Kit is an OEM part for GE refrigerators. It includes a water valve and a mounting bracket designed to facilitate the connection and operation of your refrigerator's ice maker and water dispenser system. This part controls the flow of water into the refrigerator, ensuring that both the ice maker and water dispenser receive the proper amount of water at the correct pressure.
Causes of a bad Water Valve and Bracket Kit can include mineral deposits from hard water, which can clog or damage the valve, and normal wear that might cause the valve to leak or fail to open or close properly.
Symptoms of a bad Water Valve and Bracket Kit include:
Fridge is 14 years old, ordered the water valve assembly and hose. Removed and replaced both Read more
The Shelf Stop is an OEM replacement part for GE refrigerators. The shelf stop in your refrigerator is what locks the shelf into the refrigerator liner.The shelf stop features a small protruding nub that fits into pre-cut slots in shelf supports, preventing shelves from being inserted too far. Causes of a bad shelf stop can include wear over many years of shelf adjustment, or damage from impact with shelves. Symptoms of a bad shelf stop include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Watched short You Tube repair video. I saved at least on a $100 GE service call. The electronic ID assembly was priced much less than quote on GE.com! Read more
The Screw is an OEM part for GE refrigerators. It serves a crucial function in securing and allowing smooth operation of the refrigerator's drawer rollers.
Causes of a bad or missing screw can include accidental loss during repair or maintenance, stripping of the screw threads due to overtightening, or general wear and tear over time.
Symptoms of a loose or screw include:
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
This helix is the plastic spiral inside the refrigerator's ice bucket that works with the auger to move ice toward the crusher and dispenser. Replacing a worn or broken helix restores smooth ice dispensing and reduces jams.
Ice was not being dispensed when lever was pushed in either crushed or cubed mode I removed the ice bin. After searching the web for reasons for this I pulled the bin out and started looking at auger assembly. I noticed that the sections of the Helix blades were missing. Ordered the Helix here at AAP and received the part the next day. The whole process took about an hour and as others have noted, you have to disassemble the bin assembly to get the auger assembly out. I watched the video... Read more
The Ice Stripper is an OEM Replacement Part designed for rear-mount icemakers in GE refrigerators. This part measures approximately 7.25 x 2.5 inches. The ice stripper functions during the ejection cycle to remove ice from the icemaker mold. This white and plastic part facilitates the transfer of ice cubes from the ice maker into the ice bucket.
Causes of a bad ice stripper can include regular wear and tear from frequent use, exposure to hard water deposits, and accidental impacts or mishandling. Over time, the stripper can crack, break, or become inefficient at removing ice cubes.
Symptoms of a bad ice stripper include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models
Replaced the parts. Initially, in order to ensure the ice maker itself was still working, I did some repairs to test it. I repaired the cracked crusher cover with a plastic welder, I also repaired the glide bucket Lh with the plastic welder & some epoxy. I attached the broken ice stripper pieces with the plastic welder. If the ice maker made ice I knew it was safe to buy new parts. It made ice for two days only but after it dropped ice the first time I ordered the parts. Parts did not... Read more
The Ice Chute Funnel is an OEM part for GE refrigerators. It directs ice from the dispenser to the glass.
Causes of a bad ice chute funnel can include wear and tear over time, cracking or breaking due to frequent use, or damage from attempting to clear jams or blockages.
Symptoms of a bad ice chute funnel include:
I removed the Display Panel and unplugged all the connections from the Panel. I removed the Dispenser Housing Shield along with the Ice Shoot Shield and the Paddle Dispenser. I then removed the Dispenser Switch from the Dispenser Housing Shield, as I suspected that the Dispenser Switch was the problem. I ordered a new Paddle Dispenser as ours had lost the finish from water deposits over time, but also order the Ice Shoot Shield as a piece broke on removal (my fault, I believe). We received... Read more
The Freezer Door Lower Hinge Bushing is an OEM replacement part for GE refrigerators. It is a component located within the freezer door hinge. Causes of failure typically involve normal wear over extended use. Refrigerator doors experience frequent adjustment which can deteriorate hinge bushings. Symptoms of a bad lower hinge bushing include: