Rf262lxst067abwp/Xaa Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10245805
The Cooktop is an OEM part for Whirlpool ranges. This part serves as the cooking surface where pots and pans are placed for heating and cooking.
Causes of a bad cooktop can include cracks or breaks from heavy impacts, wear and tear from regular use, or damage due to overheating.
Symptoms of a bad cooktop include:
- Visible cracks or chips on the surface
- Difficulty in cleaning due to surface damage
- Uneven heating of cookware
- Discoloration or burn marks
- You should replace the cooktop if it becomes damaged or worn out.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Glass top on stove was broken Jaime M. • Garden Grove , CA • June 02, 2015
Just removed the old glass top which consisted of removing 6 screws
Read more
More
$417.95
- Compare At:
-
$480.26
- You Save:
-
$62.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W10647259
This hinge receiver mounts to the appliance frame and accepts the door hinge arm/pin. It keeps the door aligned and secure so it opens and closes smoothly. Replacing a worn or cracked receiver restores proper door action.
- Anchors the hinge arm/pin at the cabinet/frame for smooth door movement
- Maintains door alignment and consistent closing action
- Wear or damage can cause a loose or sagging door, misalignment, or binding
- Common signs include clicking/grinding noises and visible cracks or deformation
What's included: 1 hinge receiver Install notes:
- Disconnect power; allow the appliance to cool and shut off gas/water if applicable
- Support or remove the door to access the receiver
- Remove mounting fasteners, swap in the new receiver, and align per service instructions
- Reinstall the door and verify smooth movement and full closure
Do-It-Yourself Stories from Customers like You
Oven door will not shut completely Mitch S. • Mount Laurel , NJ • January 21, 2019
I knew for sure that the hinge with the large spring was damaged, but elected to replace both hinges and receivers. Replacing the parts was fairly easy and would have taken me less then an hour. This model has thin metal covers over the hinge assemblies. I found that squeezing in the sides of the covers help to hold them in place on the hinge while reassembling the door.
My only difficulty was putting the door back on the oven. It took a little maneuvering but I managed to get it. Now the door...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523177
Color: Black
Do-It-Yourself Stories from Customers like You
Oven door bottom door trim was rusted Bill B. • Bowie , MD • April 14, 2014
Took oven door off and replaced part. While I had the door off I removed the front glass and cleaned it and the 1st interior glass window.
Read more
More
$66.66
- Compare At:
-
$79.33
- You Save:
-
$12.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Screw for side trim.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196175
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven drawer wouldn’t slide properly. Nick B. • Hanover , MD • November 09, 2020
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10107820
Includes lock latch motor and switch
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
See more...
Do-It-Yourself Stories from Customers like You
Range would not go into self clean. Gary S. • Keene , VA • April 04, 2014
I knew the door latch was suppose to lock for self clean and it wasn't, so I took the back off and after tracing out wires and the linkage to the door latch, determined that it was a faulty motor on the latch lock. I got on line and Appliance Parts Pros was the first place that I found the part. I was surprised that it wasn't real expensive, but I kept looking for a cheaper price only to come back to order it from APP. I order it around 9:00 on a Thursday night and it was on my front porch...
Read more
More
$127.40
- Compare At:
-
$152.88
- You Save:
-
$25.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10031790
This factory fastener secures appliance panels, brackets, and internal components. Replacing a missing, stripped, or corroded screw restores proper fit and stability, helping reduce vibration, rattling, and wear during everyday operation.
- Secures covers, brackets, and assemblies to the cabinet or frame
- Restores alignment to reduce gaps, looseness, and vibration
- Replaces lost, damaged, corroded, or stripped hardware
- Matches the original fastener for correct fit and retention
What's included: 1 screw Installation notes:
- Disconnect power and shut off water or gas before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Tighten snugly—do not overtighten to prevent thread or plastic damage
- Inspect receiving threads or clips; repair/replace if stripped or broken
Do-It-Yourself Stories from Customers like You
Missing screws Pamela K. • San Tan Valley , AZ • September 07, 2019
Replaced missing screws.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196068
This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.
- Covers and diffuses the indicator light for clear visibility
- Fills the control panel opening for a finished, factory appearance
- Helps shield the opening from dust, splashes, and contact
- Common fixes: cracked, missing, loose, or discolored indicator lens
What's included: 1 red indicator light lens Install notes:
- Disconnect power by unplugging the appliance or switching off the breaker before servicing
- Access the control panel/backguard per your model's instructions
- Release the old lens (tabs/retainer) and press the new lens into the opening until fully seated
- Restore power and verify the indicator light is visible through the lens
Do-It-Yourself Stories from Customers like You
Dual burner went to full hot no matter what the knob was set at Richard L. • Biddeford , ME • January 18, 2020
Replaced the burner switch. While I was in there, I noticed that the indicator light holder had broken off the lens (poor setup) and that one of the wires to the socket was too short so I added a short segment to the wire with insulated crimp connectors and all is well!
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761962
The Top Burner Control Knob is an OEM part for Whirlpool ranges. This knob allows you to control the heat level of the stovetop burners, providing precise adjustments for cooking.
You should replace the control knob if it becomes damaged or worn out. Causes of a bad control knob can include frequent use, accidental impact, or exposure to high temperatures, which can result in the knob becoming loose, cracked, or difficult to turn.
Symptoms of a bad top burner control knob include:
- Difficulty turning the knob
- The knob not staying in place
- Cracks or visible damage
- Inconsistent heat levels when adjusting the burner
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Surface indicator light wouldn't go off John W. • Lyndonville , VT • January 23, 2015
Determined that the LF infinite control switch contacts for the burner indicator light were stuck closed. I replaced the control as well as the knob as the knob felt loose on the control.
Read more
More
$21.95
- Compare At:
-
$26.12
- You Save:
-
$4.17
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523167
Color: Biscuit. Right hand side. For left hand use WP8523173
Do-It-Yourself Stories from Customers like You
I broke two trim pieces taking the oven door apart to clean it since i was ordering to side trim pieces i decided to replace the bottom door trim piece as well since it was bent and rusty Jennifer W. • Richmond , CA • July 19, 2016
The hardest part of this repair was a) realizing that the easiest way to clean the oven door pieces is to remove the whole door and b) figuring out how to put the oven door back on. Doing (b) is infinitely easier if you stick two allen wrenches into the holes in the door hinge, but these holes ONLY appear when the door is fully open. Prop the hinges open BEFORE you remove the door.
As many posters online will tell you, it is easy to remove the oven door but hard to put it back on. It...
Read more
More
$54.35
- Compare At:
-
$65.22
- You Save:
-
$10.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523173
Color: Biscuit. Left hand side. For right hand use WP8523167
Do-It-Yourself Stories from Customers like You
Replace plastic trim pieces on maytag electric oven door Thomas L. • Dillsburg , PA • January 04, 2015
Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble !
By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!?
While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will...
Read more
More
$55.37
- Compare At:
-
$66.44
- You Save:
-
$11.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.
- Threads into the base at the front corner to raise or lower the unit for accurate leveling
- Stabilizes the appliance to minimize rocking and vibration when opening the door or using the cooktop
- Restores proper adjustment when the original foot is stripped, bent, or missing
- Common signs include a wobbling appliance, difficulty leveling, or metal-to-floor contact/scuffing
Includes: 1 front leveling leg. Install notes:
- Disconnect power; turn off the gas supply
- Protect the floor and use an assistant to carefully slide and tip the appliance
- Start the new leg by hand to avoid cross-threading; finish adjustment with a wrench
- Level front-to-back and side-to-side, then verify stability before restoring service
Do-It-Yourself Stories from Customers like You
Bought a used stove needed cosmetic fixes. Wendy G. • Defiance , OH • November 09, 2023
Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled.
Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly.
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761964
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10347466
This door hinge supports and guides the appliance door so it opens and closes smoothly and stays properly aligned, helping the door seal engage correctly for safe, reliable operation.
- Supports the weight of the door and controls opening/closing motion
- Helps maintain door alignment so latches/seals engage properly
- Wear or damage can cause sagging, rubbing, squeaking, or difficulty closing
- A misaligned door may prevent the unit from starting or sealing correctly
What's included: 1 door hinge Installation notes:
- Disconnect power and allow the appliance to cool before servicing
- Use gloves and eye protection; doors can be heavy and spring-loaded
- Support the door during removal to prevent damage
- Transfer any hardware from the old hinge to the new one if re-usable
Do-It-Yourself Stories from Customers like You
Door hinges on an oven James D. • Pawling , NY • April 10, 2016
The repair went very smooth because all I had to do was watch your video. Good job!
Read more
More
$99.79
- Compare At:
-
$118.75
- You Save:
-
$18.96
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196174
This machine-thread screw secures brackets, panels, and trim inside your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces rattles, and keeps assemblies properly aligned. What it does:
- 10-32 machine-thread screw used to fasten metal components
- Maintains alignment and stability of panels, brackets, and trim
- Replace if threads are stripped, head is damaged, corroded, or missing
- Common symptoms: loose panel/handle, vibration noises, gaps or misalignment
What's included:
Install notes:
- Disconnect power (and gas, if applicable) before servicing
- Support the component and start threads by hand to avoid cross-threading
- Use the correct driver; do not overtighten to prevent stripping
- Match thread size and length specified for your model
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13