Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Covers and protects the vegetable drawer compartment. Replace if the plastic frame is cracked, broken, or the glass is shattered or missing.
Replaced original parts- Only skill needed was finding plastic push tabs. No tools required. Most of time was used for removing food from refrigerator before looking for tabs. Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Maintains an airtight seal to keep cold air inside your refrigerator. Replace if you notice frost buildup, warm spots, or condensation. Confirm fit with your model number before ordering.
Found AppliancePartsPros.com by googling my model # (RF26XAEBP/XAA) and problem. Was hesitant, but ordered the gasket and not only did it arrive in a couple days, it was the right part, and super easy to install. I used the manual to figure out how to get the freezer drawer and basket out and then realized there were four bolts holding the door on that needed to come out. It was super easy to do with someone helping to hold things level for install and removal. Pull the old seal out, and... Read more
Creates an airtight seal to maintain proper temperature and keep food fresh. Replace if torn, leaking air, or not sealing properly. Confirm fit with model.
Ordered replacement gasket. Old one was removed bybgrabbing a corner and pulling. It is a simple push in gasket. No disassembly of the door required. No tools other than my fingers needed it install the new gasket. Quick and easy. Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
This factory fastener secures appliance panels, brackets, and internal components. Replacing a missing, stripped, or corroded screw restores proper fit and stability, helping reduce vibration, rattling, and wear during everyday operation.
Replaced missing screws. Read more
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more
Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.
I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more
Covers the heater assembly on French door refrigerators. Replace if the hinged cover is cracked, broken, or missing. Installs on the center mullion.
Removed broken piece, installed new piece. Read more
Size: 8-18 x 1/2 inch.
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more
The Refrigerator Door Reed Switch is an essential component for maintaining the optimal performance of your refrigerator. This genuine OEM part ensures accurate detection of the doorGÇÖs open and closed states, allowing your appliance to operate efficiently. Designed specifically for Samsung refrigerators, the Refrigerator Door Reed Switch guarantees a perfect fit and seamless integration with your existing system. By replacing a faulty or worn-out reed switch with this high-quality part, you can restore your fridgeGÇÖs functionality, preventing issues such as improper cooling or malfunctioning door alarms. The reliable performance of this switch helps maintain the right temperature inside your refrigerator, keeping your food fresh and your appliance running smoothly. Easy to install, the Refrigerator Door Reed Switch offers a straightforward solution for DIY repairs, saving you time and money. Trust in this genuine OEM part to deliver long-lasting durability and dependable operation, ensuring your Samsung refrigerator continues to serve your needs effectively.
Unplug all the plugs to the main control board and switched to the new control board. Works perfect thank you. These days you have to do stuff yourself. Everything is getting so expensive. AppliancePartsPros customer service was 100% good. Gave me the right parts thank you again and again. Read more
This is a small magnet that works with the reed switch sensor to detect whether the refrigerator door or dispenser drawer is open or closed. It triggers the door ajar alarm and controls the interior light. Replace this magnet if the door ajar alarm sounds constantly even when the door is shut, or if the interior light stays on or off regardless of door position.
Ordered leg. Cover and magnet switch. I did not need magnet switch, it came on the new leg cover. Read more
This assembly includes the motorized latch mechanism and integrated switches that lock and unlock the oven door during the self-cleaning cycle. It secures the door shut when the oven reaches high temperatures and signals the control board when the door is properly latched. Replace this part if the oven door won't lock or unlock, the self-clean cycle won't start, or you receive a door lock error code.
I knew the door latch was suppose to lock for self clean and it wasn't, so I took the back off and after tracing out wires and the linkage to the door latch, determined that it was a faulty motor on the latch lock. I got on line and Appliance Parts Pros was the first place that I found the part. I was surprised that it wasn't real expensive, but I kept looking for a cheaper price only to come back to order it from APP. I order it around 9:00 on a Thursday night and it was on my front porch... Read more
The Refrigerator Flapper Door Hinge Cover is designed to restore the functionality and appearance of your Samsung refrigerator. This genuine OEM part ensures a precise fit, seamlessly integrating with your applianceGÇÖs door hinge system. Crafted from durable materials, it provides reliable protection against daily wear and tear, extending the lifespan of your refrigerator. Installing the Flapper Door Hinge Cover is straightforward, allowing you to replace a damaged or missing component without the need for professional assistance. This cover not only enhances the aesthetic of your refrigerator but also maintains the smooth operation of the door, preventing issues such as wobbling or misalignment. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part guarantees optimal performance and durability. By choosing the Refrigerator Flapper Door Hinge Cover , you ensure that your appliance functions efficiently and looks its best. Whether you are addressing a broken hinge cover or simply upgrading your refrigeratorGÇÖs components, this part offers a dependable solution to keep your kitchen running smoothly.
I replaced the spring and door heater cover. The video was a life saver on what was needed and how to also the customer Representative was very knowledgeable and sent a video like with my conformation. Read more
Houses and secures your refrigerator's water filter while distributing filtered water to the dispenser and ice maker. Replace if leaking, cracked, or dispenser stops working after filter changes. Confirm fit with your model number.
This had been going on for several years. Thought it was due to switching to non-Samsung filters as it was very hit and miss whether I could get the dispenser working well after a filter change. Dispenser worked great if I removed the filter. It finally got bad enough that it was obvious the filter was not the issue. This turned out to be a pretty easy part replacement. The water filter and tank assembly is held in place by the shelf above and a T shaped tab below. It just slides forward... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.