Rfs12ts Parts

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

I took the cover off the transmission and determined that the only possible knocking had to be coming from the yoke. I ordered a new yoke and all the tub seals needed to put it back together like new. I also ordered a new drive pulley bearing because this bearing is always turning whenever the washer is used. I cleaned all the parts up while I was waiting for the new parts to arrive. I promised my wife I would make it look like new. I installed all the new parts in one day and let the... Read more

• Noisy

My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

• No heat

I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more

• No heat

I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more

• Won't start

I have a Jenn-Air microwave that didn't turn on and had no lights. It just stopped working completely. I unplugged the unit and had to remove the rear cover using a *security screw kit* that prevents people from opening the rear panel. Once opened, I removed the fuse and testing it with an OHM reader to determine that the fuse went bad. But I also had to determine why the fuse blew and noticed a sticky oily substance under the Capacitor. I used a rubber glove and needle nose pliers to... Read more

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

I am a 78year old woman and 40 years ago I replaced the belt on a dryer but could not even consider such a feat today. I ordered the parts from you on line and also found the video that you very nicely have attached to the site and I saved this under my favorites. The baffles arrived within 3 days and due to my age was unaware that dryers now come in two sizes and the ones I ordered were for the smaller but same model. I worked with a very nice customer service agent on line who got me the... Read more

I checked for the reasons there was no power to the microwave. Then I talked with the technician at AppliancePartsPros who stated that it was most likely a blown or defective fuse. My LG microwave has two thermal fuses, a fuse assembly with two prongs and a short (1 inch) barrel type fuse. I replaced all of them after viewing YouTube videos and then reviewing the diagram for my microwave on the AppliancePartsPrps website. That was very helpful in locating where the fuses were installed. It... Read more

A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent... Read more

I received the parts from parts pro within 3 days and everything fit perfectly nd all went well Thanks Parts Pro Wayne Mazur Joliet Il Read more