Rmc305 Parts

Found Appliance Pros online and they carried the bulb I needed. I ordered on Monday and got it the next day. I bake a lot so it is really annoying when the bulb burns out. My oven actually has two of these bulbs and they are expensive. Read more

Replaced Magnetron and diode. Fixed problem and microwave workso again. Very time consuming because of microwave/oven built-in combo. Not easy to get to parts that needed to be replaced. Still cheaper to repair than to replace. Read more

I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more

The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Tested the High Voltage Capacitor which showing no capacitance and no resistance. Replaced it together with the diode and the line fuse no longer blew and the microwave is back in service. Read more

Ordered switches and replaced. Inner and outer covers had so many screws that I had a hard time removing all of them. Had screws leftover, panels were tight enough for me. Left screws out. Read more

I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to... Read more

I am a 78year old woman and 40 years ago I replaced the belt on a dryer but could not even consider such a feat today. I ordered the parts from you on line and also found the video that you very nicely have attached to the site and I saved this under my favorites. The baffles arrived within 3 days and due to my age was unaware that dryers now come in two sizes and the ones I ordered were for the smaller but same model. I worked with a very nice customer service agent on line who got me the... Read more

Replaced it with the part I got from you. Read more

Replaced It With New One Read more

Replaced glass and missing screws. Hardest part was removing the old glass because of the double sided tape. Read more

I was able to order new hinge receiver brackets for the door. The repair was not that bad. I just had to take off the lower door, take the two trim pieces off the sides and unscrew the screws holding the oven into the face of the cabinet. Then slide it out about halfway and put a step stool under the front to keep it from tipping over. Then it was just a matter of taking off everything around the sides until I could take the brackets off, put the new brackets on, and put everything back... Read more

I was able to order new hinge receiver brackets for the door. The repair was not that bad. I just had to take off the lower door, take the two trim pieces off the sides and unscrew the screws holding the oven into the face of the cabinet. Then slide it out about halfway and put a step stool under the front to keep it from tipping over. Then it was just a matter of taking off everything around the sides until I could take the brackets off, put the new brackets on, and put everything back... Read more

I replaced the control board without much difficulty, but found original installer had broken all but one of the plastic screw receptacles embedded in the control panel cover. They had originally super-glued the plastic to the wall! Anyway, ordered the plastic control panel frame and stainless cover (our cover had been dented previously). Installation was easy, just know that after you unscrew the four retaining screws (2 on each side of control panel) you must LIFT the panel up off the... Read more

I ordered a new magnetron and a new capacitor and after they arrived I set to work. I took plenty of pictures with my phone to remind me how the components came apart but it was pretty straight forward. Once the new parts were in and everything was reassembled the microwave worked good as new. The repair was less than a third the cost of replacement and no special tools are required. Just be careful to discharge the capacitor. This website is a great resource. Read more