She4316uc/64 Parts

The On/Off Button is an OEM part for Bosch dishwashers. As a primary control interface, this button facilitates the activation and deactivation of the dishwasher's functions. Its ergonomic design and precise construction ensure ease of use and reliable operation.

A common issue with a malfunctioning On/Off Button involves wear and tear, leading to a loss of responsiveness or failure to engage/disengage the dishwasher's functions.  

Symptoms of a defective On/Off Button may include:

• Unresponsive or non-functional button
• Difficulty in starting or stopping the dishwasher
• Visible damage or wear on the button's surface

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This kit replaces the sliding rails that support and guide the upper dishrack, restoring smooth, level movement so the rack doesn't bind, tip, or drop during loading and unloading.

• Guides the upper rack in and out along the tub sidewalls
• Helps correct a sticking, uneven, or hard-to-slide upper rack
• Can reduce issues like a sagging rack or difficulty engaging rack stops
• Wear from age, heavy loads, or corrosion can require replacement

• Disconnect power and shut off water before servicing
• Remove the upper rack and stops to access and swap the rails
• Transfer any hardware from the old rails
• Test rack travel and ensure stops are secure before restoring power

Hose, with o - ring, shu (uc/12 & above)

This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.

What Causes a Bad Sump to Float Hose:
Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.

Symptoms of a Bad Sump to Float Hose:

• Water leakage around the dishwasher
• Incomplete or interrupted washing cycles
• Visible cracks or damage to the hose

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Finish the sides of your dishwasher cutout. These white side trim strips cover the left and right edges for a clean, factory look and help replace cracked, yellowed, or missing trims that leave gaps beside the appliance.

• Finishes and protects the exposed side edges of the dishwasher opening
• Conceals small gaps between the appliance and adjacent cabinetry
• Restores appearance when trims are cracked, warped, discolored, or missing
• Helps keep the unit seated neatly in the cabinet cutout

• Disconnect power at the breaker and shut off water supply before servicing a built-in dishwasher
• Remove existing trims and clean the mounting surfaces of any residue
• Align the new left/right strips correctly; dry-fit to confirm orientation and length
• Secure per your model's service instructions; verify door clearance and alignment before pushing the unit fully back

The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. 

Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism.

Symptoms of an ineffective hinge lever include:

• The dishwasher door sagging or becoming misaligned  
• Difficulty fully opening or closing the door
• Loud squeaks or grinding noises coming from the hinges
• The door potentially detach from the hinge if broken 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

This is a button. This is a genuine OEM part made by Bosch and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective button on certain different makes and models of dishwashers.This button attaches to the front panel of the dishwasher and is needed for powering on and off the dishwasher. Over time and with regular use, buttons can become worn or broken and stop working. This part requires proper tools for replacement. Before starting, disconnect the dishwasher completely from both power and water hookups. Please follow appropriate safety precautions when attempting to repair any appliances. For more accurate information on how and where to install this button, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this button is suitable for use on several different models of dishwashers manufactured by Bosch, Thermador, and Gaggenau. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

The Lower Spray Arm is an OEM part for Bosch dishwashers. This part is responsible for spraying water and detergent solution onto the dishes during the wash cycle, ensuring thorough cleaning.

Causes of a malfunctioning Lower Spray Arm can include clogging or obstruction from food debris, mineral buildup, or foreign objects.  

Symptoms of a bad Lower Spray Arm include:

• Poor cleaning performance, with dishes coming out dirty or with food particles remaining
• Water not spraying evenly or failing to rotate during the wash cycle
• Loud grinding or knocking noises coming from the spray arm area

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.   

Symptoms of a potentially problematic rinse aid door sealing include:

• Leakage or spills within the rinse aid reservoir
• Mineral deposits or residue build up inside the compartment  
• Cracks, tears, or deformation of the sealing material

Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Dishwasher Control Panel Facia is an OEM replacement part designed specifically for Bosch dishwashers. It serves as the interface to control all wash cycles and provides informative displays. Causes of a damaged control panel facia can be general wear and tear over time. 

Symptoms of a bad control panel facia include:

• Non-responsive buttons
• Cracked or broken surfaces
• Controls that do not align properly

This genuine Bosch facia restores the correct function and appearance of the control panel. This Bosch part can also be used on Thermador and Gaggenau appliances.

NTC (negative temperature coefficient). Resistance or capacitance decreases when temperature increases.

The Temperature Sensor with Hi Limit Thermistor is an OEM part for Bosch dishwashers. This sensor monitors internal temperatures, providing feedback to the control module during each cycle.

Causes of failure can be related to mineral buildup over time interfering with sensing or physical damage to wiring or connectors.

Symptoms of a bad temperature sensor include:

• Abnormal or inconsistent wash temperatures
• Error codes related to temperature issues
• Reduced cleaning performance from improper heating

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Hinge Lever (LH) is an OEM part for Bosch dishwashers. This left-hand lever is responsible for assisting in the opening and closing of the dishwasher door through a pivoting motion. The hinge lever works with other door components like springs and cables to provide smooth, balanced movement of the door. 

Symptoms of a bad Hinge Lever include: 

• Difficulty opening or closing the dishwasher door  
• The door not staying securely closed during the cycle
• Excessive noise or creaking coming from the door area
• Misalignment of the door 

Causes of a bad Hinge Lever can include normal wear and tear over time, damage from excessive force or weight on the door, or loose mounting hardware.

Note: Left hinge lever

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Junction Box Cover is an OEM part for Bosch dishwashers. Located at the rear of the appliance, the junction box houses connections to the power supply and control board wiring. The junction box cover protects these internal electronic parts.

Symptoms of a bad junction box cover can include:

• Cracks, breaks or missing pieces of the plastic casing
• Exposed wires posing risk of electric shock
• Difficulties accessing internal components for service or repairs
• Potential water damage into electrical components

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

2 clamps included.

The Control Board is an OEM part for Bosch dishwashers. It is the central electronic component responsible for operating and controlling all dishwasher functions. The control board receives input signals, processes commands, and directs the operation of wash cycles, motors, heating elements, and other electrical systems. 

Symptoms of a bad control board can include:

• The dishwasher is not starting or finishing cycles properly
• Lights, displays, or touchpads not working correctly 
• Strange noises coming from the dishwasher interior
• Inability to change programs or select desired cycle settings

Causes of control board failure may be due to electrical issues such as power surges, shorts, or general circuit malfunctions that can interfere with board operation over time. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Panel-Base is an OEM part for Bosch dishwashers. 

Causes of a bad panel-base can include long-term wear and tear from normal operation, subjecting it to excess weight or strain, or accidental damage from moving or transporting the dishwasher.

Symptoms of a failing panel-base include:

• Warping or bending of the sheet metal
• Loosening or detachment from adjacent parts
• Cracks or breaks appearing in welds/seams
• Leaks developing from compromised seals

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Drain Pump Cover is an OEM part for Bosch dishwashers. This cover protects the drain pump mechanism from debris while draining dirty water after each cycle.

Causes of a bad drain pump cover include cracks or breaks from heavy impacts over time.

Symptoms of an improperly functioning cover include:

• Leaks in the area around the drain pump
• Decreased drain and pump performance over time
• Potential clogs from broken pieces inside

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.