She53755uc07 Parts

A programmed electronic control module that replaces the dishwasher's main control board to restore cycle selection and electronic functions. Installs as a direct replacement to resolve control-related failures and erratic operation. What it does:

• Replaces the dishwasher's central control to manage wash cycles, timers, and sensor inputs.
• Helps stop symptoms like no start, unresponsive touch controls, or interrupted cycles.
• Can clear or prevent intermittent faults caused by a failing main board.
• Works with the appliance's existing wiring harness and user interface.

• Turn off power to the appliance at the breaker before starting work.
• Handle the board by its edges and avoid contact with circuitry to prevent damage from static.

This installation set is the OEM hardware kit used to connect and install a dishwasher. It provides the fittings needed to attach water and drain lines so the appliance can be hooked up safely and correctly. What it does:

• Replaces a missing or damaged installation kit so the dishwasher can be properly connected
• Provides the fittings and connections needed for water inlet and drain hookup
• Helps ensure a secure, leak-free connection when installed per manufacturer instructions
• Useful when completing new installs or repairing installation hardware

• Turn off water and power to the appliance before beginning work
• Follow the appliance manufacturer's installation instructions and local codes
• Use proper tools and replacement seals; check all connections for leaks after installation

This replacement power cord restores mains power to compatible Bosch appliances, providing a safe, OEM-style connection so your appliance can turn on and run reliably. Use when the original cord is damaged or not supplying power. What it does

• Supplies electrical power from the wall outlet to the appliance for normal operation.
• Replaces frayed, cut, or melted cords that can cause intermittent power or no power.
• Helps eliminate loose connections that can cause arcing, flickering, or tripped breakers.
• Restores a secure, strain-relieved connection where the cord meets the appliance chassis.

• Always disconnect power at the breaker or unplug the appliance before beginning service.
• Follow the appliance wiring diagram and secure all terminal connections per the manufacturer instructions.
• Route the cord through strain reliefs and grommets to prevent chafing; use supplied or OEM fasteners if present.

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This is a replacement push button set for the control panel. It restores smooth, reliable button action so you can select settings without sticking or broken caps, keeping operation intuitive and the fascia looking clean.

• Replaces worn, cracked, or missing push button caps on the control interface
• Transfers your press to the underlying switch bank for proper function selection
• Helps resolve buttons that stick, wobble, or don't spring back
• Refreshes the appearance of the control panel

• Disconnect power to the appliance before servicing
• Remove or open the control panel to access the button set
• Note the position and orientation of each button; transfer components in the same order
• Before final reassembly, test each button for smooth travel and proper actuation

This outer door is the dishwasher's front exterior panel that restores the unit's finished appearance and protects internal components from damage. Replacing a damaged door helps maintain proper door alignment and exterior protection. What it does:

• Serves as the dishwasher's front exterior panel and cosmetic cover.
• Protects inner door components, insulation, and wiring from impacts and moisture.
• Supports the door latch and helps keep the door aligned for proper closing.
• Replace if the door is dented, cracked, rusted, or causing poor fit or visible damage.

• Disconnect power and water supply before starting any repair.
• Door panels can be heavy or awkward—use a second person to lift and align.
• Handle edges carefully; trim or glass may be sharp.
• Transfer hinges, latch, insulation, and trim as required.

This facia panel is the exterior trim that covers a dishwasher's control console, restoring the appliance's appearance and protecting the underlying buttons and electronics from moisture and wear. It's a direct-replacement cosmetic and protective panel. What it does:

• Covers and protects the control console and electronic components from spills and moisture.
• Restores a damaged, cracked, or scratched front appearance for a cleaner finish.
• Keeps button and touchpad openings aligned for reliable user access.
• Helps prevent debris buildup behind the control area that can cause malfunctions.

• Disconnect power to the appliance before beginning any repair.
• Remove the outer door or control assembly per the appliance service instructions to access mounting screws or clips.
• Handle edges carefully to avoid scratching the replacement panel and to prevent cuts from metal edges.
• Reuse or replace any mounting screws/clips as needed; do not force panels into place.

This dishwasher cup shelf mounts to the upper rack to hold cups, mugs, stemware, and small items securely. Replace a broken or missing shelf to keep items upright and organized throughout the wash cycle.

• Provides a platform on the upper rack for cups, mugs, stemware, and small items
• Helps keep items upright and reduces movement during wash and rinse
• Restores proper loading when the original shelf is cracked, loose, or missing
• Common signs: broken mounting tabs, shelf won't stay in place, cups tipping over

• Unload the upper rack; removing the rack can make access easier
• Align the shelf's mounting tabs with the rack wires and snap firmly into place
• Confirm the shelf moves freely and does not interfere with the spray arm
• Test with a light load to ensure secure placement before full use

This facia panel is the exterior control trim that covers and protects the appliance's control area while restoring a finished look. Replaces damaged, cracked, or worn panels to improve appearance and protect internal controls. What it does:

• Covers the control area and provides the finished front surface for buttons and display
• Protects the control board and switches from spills and debris
• Restores a clean, undamaged appearance after impact or wear
• Helps ensure buttons and touch areas align correctly with controls

• Disconnect power before starting any repair to avoid shock or injury
• Remove surrounding trim and control access panels to reach mounting screws; handle carefully to avoid scratching
• Take care aligning tabs and fasteners during reassembly so buttons and display align properly

This insulating protection strip shields wiring and nearby components from heat and abrasion, helping maintain safe operation and prevent premature wear. It's a low-profile, heat-resistant sleeve used where wiring passes near hot appliance parts. What it does:

• Provides thermal and abrasion protection for wiring and small components
• Helps prevent shorting or insulation damage from heat exposure
• Reduces wear where wires contact sharp edges or moving parts
• Commonly used when replacing control or harness components near heat sources

• One insulating protection strip/sleeve as shown

• Only install with power disconnected and appliance fully cooled
• Position sleeve fully over exposed wiring or component and secure per OEM routing
• Inspect surrounding wiring and connectors for damage; replace any frayed insulation

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance