Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is just the bucket.
Called on Tuesday afternoon and wensday morning the part ordered was delivered. Replaced broken part with new in about 20 minutes. Seems to be working fine. Read more
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new auger and installed it and now we have clean ice for our drinks. Read more
Replaced Ice maker very easy. Read more
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
I tried to glue the broken piece back on but had no luck. You had a friendly web site, I found the correct replacement part quickly. Read more
Color: Black.
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
I bought whole new ice bin and it it's now the ice is great. Read more
It was fairly simple. The blade just slides onto the post of the condenser. Thanks to Appliance Pros, we should not have this problem again. We were offered to buy a special 28" long brush made to clean the refrigerator coils, and it works great! :) Read more
I researched the problem and determined that the only thing that can cause this was compressor bad or not starting. Since it was cold the day before I felt it had to be the starter parts and ordered them. It was also very important to clean the coil which I believe caused the over heating. Read more
I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that... Read more
Ordered the parts and in a couple of days they arrived. A simple Philips screw driver was all that was needed to complete the install. Very simple, not complicated. You don't need to order the slide bushings as the slide assy. has them installed from the factory. Appliance Parts Pros is the best!!! terry,florida Read more
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more
I cleaned the coils as best as I could with a special brush and replaced the seized up fan motor. Read more
This part is white.
This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.
Replaced the deflector Read more