Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Replaced the evaporator fan motor, fan blade, and two rubber grommets. I was careful to mark screws and bolts with sticky notes to ensure getting them back in the right place. I had all the new parts ready before I started the job because I did not have an extra freezer for my food and I wanted to do this quickly and only once. New parts went in well, Took a while to install the ring for the new fan blade using my long nose pliers. I would have saved time if I had the special ring spreader... Read more
Two screws, screwdriver and 5 minutes. Very simple!! Read more
This is just the bucket.
Called on Tuesday afternoon and wensday morning the part ordered was delivered. Replaced broken part with new in about 20 minutes. Seems to be working fine. Read more
Replaced Ice maker very easy. Read more
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new auger and installed it and now we have clean ice for our drinks. Read more
Includes 2 door handles.
The white had worn off the refrigerator and freezer door handles exposing the dingy yellow underneath. Because it was a soft vinyl material, I didn't think paint would work. The replacement parts arrived two days after ordering. Accessing the door handle screws involved removing two pieces of trim by wedging a narrow bladed screwdriver into the top joint between the white trim and the chrome channel and gently prying the trim outward and down toward me until it popped out of the channel. I ran... Read more
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
I emptied door shelves and used plastic sheet to close off refrigerator. The repair was done with refrigerator running. I removed door and changed riser cam and shim. Then replaced door. It took maybe 45 minutes from start to finish. If I did the job again it would be completed in 30 minutes or less. The videos are informative. Thank You Read more
Color: Black.
I tried to glue the broken piece back on but had no luck. You had a friendly web site, I found the correct replacement part quickly. Read more
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
Ok so my mom called GE and a service man came out. He said no good. The refrigerator was to old to be fixed. You will have to buy a new one .. ok so with that said he collected his $100 dollars service fee !!! I slid the refer out and started tinkering with it. I went on line and hit your web page saw schematic map and ordered fan motor because the one on refer wouldn’t turn !!!! You guys delivered it on a Sunday ( perfect) I put it in carefully and bam it worked. I was in shock that it was... Read more
I researched the problem and determined that the only thing that can cause this was compressor bad or not starting. Since it was cold the day before I felt it had to be the starter parts and ordered them. It was also very important to clean the coil which I believe caused the over heating. Read more
Pulled out broken one and put on new one. Read more
Lower fresh food section.
Went online ordered the two parts needed which were discounted lower than the list price Sears wanted for the two parts. After ordering the parts were delivered within two days transit time. Took me less than ten minutes to swap out the two defective parts. Read more