Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a refrigerator that won't cool or clicks repeatedly. This compressor start relay powers the start winding to help your compressor run. DIY repair.
After running some tests I determined that the problem was a bad defrost timer. The timer would occasionally fail to trigger the compressor to restart at the end of the defrost cycle. Since I had the unit taken apart, I replaced the termination t-stat and the compressor start relay at the same time. Parts came quick 1.5 days, job completed and the unit is up and running. Read more
Seals the fresh food door to keep cold air in and moisture out. Replace when worn to restore temperature control and reduce condensation. Verify fit by model.
Loosened nuts around outer flange. Pulled out old gasket as shown in video. Prepared new gasket per included instructions. Installed new gasket again using techniques shown in video. Secured nuts then confirmed proper seal. This was not a difficult repair however patience and care is needed to ensure new gasket is properly seated without damage. Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
White plastic support post that holds up the crisper drawer cover in your refrigerator. Replace if broken, missing, or lost during moving to prevent sagging.
Ordered replacement and had it in two business days. Compared the part to the area where it had to go and got it installed in seconds and it fitted perfectly. Read more
Ice maker water line: 1/4x 8ft.
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan Read more
Ice maker not making ice or water leaking? A faulty water inlet valve often causes these issues. This DIY fix takes 5-15 minutes with basic tools.
After some research on the internet,I found out that the most likely cause was a failed water inlet valve. The refrigerator is quite old so I wasn't going to spend an arm and leg on it to fix it. I was pleasantly surprised to find the part, at a reasonable price, that I needed on this website with a helpful how-to video to boot. The part I needed wasn't in stock. I was followed up with an e-mail stating an estimated time when the part would be released. A week or so later I received the... Read more
Speed clip slides over panel edges to create captive threads for mounting screws. Replace worn, missing, or broken clips to restore secure attachment.
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems. Read more
Fix water leaks in your refrigerator's ice maker or water line. This tube insert reinforces plastic tubing for leak-resistant compression fittings.
Stops refrigerator fan rattling and buzzing noise. This rubber grommet cushions the fan motor to reduce vibration. Simple DIY fix, takes under 30 minutes.
Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more
This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.
Replace Read more
Replacement bottom hinge pin for refrigerator doors. Restores proper door pivot and alignment when original pin is worn, bent, or missing during moves.
Ordered new hinge piece and installed Read more
Supports and enables smooth movement of your refrigerator cabinet. Replace if cracked, broken, or crumbled to restore stable positioning and mobility.
I contacted Appliance Parts Pros' wonderful (comprehensive and accurate) website, to search for the part. I located the part, so I ordered it and received it within 4 days, which is also an advantage of using Appliance Parts Pros. Upon arrival of the part, I had to grind off one end of the river that acts as a hub for the wheel to turn on. Then I slipped the the plastic wheel, that I received from Appliance Parts Pros, onto the rivet and welded it to the metal cage it fits onto. Finally I... Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent... Read more
Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.
This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.
I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln. It was so easy to fix, next time I'll let my wife do it. Read more