Wd12x11517 Parts

Flexible drain hose assembly that carries wastewater from your washer to the household drain. Replace if cracked, leaking, or damaged during installation.

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

Supports smooth drum rotation in your washer. Replace if you hear loud roaring or grinding noises during spin cycles. Confirm fit with your model number.

Fix TE error code on your washer with this thermistor assembly. Monitors water temperature during wash cycles. DIY-friendly repair with video guide.

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

Supports suspension springs that stabilize the washer drum, reducing vibration and noise during operation. Replace if drum shakes excessively or hits sides. Verify fit with your model number.

Top cover assembly for washer tub access. Replaces cracked, broken, or damaged lids. Includes mounting clips for secure installation. Essential for loading.

This part is a hinge. This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective hinge on multiple different models of LG washers and dryers. This part is made for use with LG appliances and may not correctly fit appliances manufactured by other brands. This hinge is for attaching the lid of the washer or dryer to the appliance, allowing it to open and close smoothly. If the lid will not open properly, the hinge may need to be replaced. Please follow appropriate safety precautions when attempting to replace any appliance parts. Ensure the washer or dryer is fully disconnected from its power source before attempting this repair. For more accurate information on how and where to install this replacement hinge, the manufacturer owner's manual and diagrams should be referenced.As an authentic replacement part, this hinge is suitable for use on several different models of washers and dryers manufactured by LG. Please note that this is a genuine part made of high-quality, durable plastic and is sold individually.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

Washer not heating water or showing tE error? This temperature sensor monitors water temp and signals the control board. Moderate DIY repair fixes temp issues.

Mounting bolt for washers. Secures internal components and assembly parts. Replace if bolt is stripped, corroded, missing, or damaged during repairs.

Durable plastic drain hose that connects to the back of your washer near water hookups. Replace if cracked, kinked, or missing to restore proper drainage.

Base bracket that holds the leveling foot at the washer cabinet. Replace if cracked, broken, or missing to restore stability and prevent rocking or vibration.

This drain hose connector links the dishwasher's drain hose to its mating port for a secure, leak-resistant fit, helping wastewater exit properly and reducing leaks at the hose connection point. What it does:

• Joins the drain hose to the appliance's drain system and maintains a tight seal
• Helps ensure proper drainage during the pump-out portion of the cycle
• Provides a secure connection to resist hose slippage
• Common symptoms include leaks near the hose fitting, a loose or cracked connector, the hose popping off, or slow/poor draining due to a loose connection

• Disconnect power at the breaker and shut off the water supply before servicing
• Pull the unit forward to access the drain path and place a towel to catch residual water
• Loosen the hose clamp(s), remove the old connector, fully seat the hose on the new connector, and re-secure the clamp(s)
• Run a short cycle and check all connections for leaks

Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.