Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes loud banging during spin cycle and excessive vibration. Secures the drum spider assembly. Time-consuming repair (6 hours) but saves replacement costs.
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point... We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a... Read more
Secures the door boot gasket on your washer. Replace if seal pops off, leaks occur, or spring wire breaks. Confirm fit with your model number.
Normally, I hire someone to come fix washer or dryer problems as time is limited and if the cost is close or more than the machine, I buy a new one instead. But since we are on shelter-in-place, I figure I could repair it since I have more time on my hands and my brother assured me, it was not hard to do. I took the top panel, door off and then looked online to find a service manual, which allowed me to take the front panel off. My suspected drain hose was the failure mode: the rubber tube... Read more
Fixes loud banging noise during spin cycle caused by cracked or broken balancer. Concrete weight stabilizes drum movement. Moderate DIY repair.
Purchased the part. Removed the top of the washer and reinstalled the new weight balancer. Read more
Washer Assembly Bolt is essential for securing components in your Samsung washer. Crafted as a genuine OEM part, it ensures durability and reliability in your appliance. This bolt assembly is specifically designed for Samsung washers, guaranteeing a perfect fit and easy installation. Made from high-quality materials, it withstands the demands of regular use, providing long-lasting performance. Replacing worn or damaged bolts with this genuine OEM washer assembly bolt helps maintain the structural integrity of your machine, ensuring it operates smoothly and efficiently. By choosing this reliable part, you can confidently restore your washer to optimal working condition, enhancing its lifespan and performance. Trust in this Washer Assembly Bolt to deliver the functionality you need for a dependable laundry experience.
I took apart the washer to find both of the weight balancers had broken in 2 and were banging around. They had also caused the boot seal to rip. I removed the broken weight balancers and replaced them along with a new boot seal. There was one small spot with the seal wasn't fully attached to the outer drum so I had to take it back apart to fix that minor error on my part. Otherwise, it was a fairly easy fix. Read more
Secures the inner door boot seal on front-load washers. Replace if seal is loose, leaking, or damaged. Confirm fit with your model number before ordering.
The Washer Bracket Nut is an essential component for maintaining the stability and functionality of your Samsung washer. This genuine OEM part is specifically designed to ensure a secure fit, helping to keep your appliance firmly in place during operation. Crafted with high-quality materials, the Bracket Nut offers durability and reliability, reducing the risk of loosening or damage over time. Its precise engineering allows for easy installation, enabling you to quickly restore your washer to optimal performance without the need for extensive repairs. By choosing this Washer Bracket Nut, you are investing in a part that seamlessly integrates with your Samsung washer model, ensuring compatibility and long-lasting support. Whether you're addressing a loose bracket or replacing a worn-out nut, this genuine OEM part provides the perfect solution to enhance your washer's stability and efficiency. Trust in the Washer Bracket Nut to deliver the dependable performance you expect from your Samsung appliance, ensuring a smooth and reliable laundry experience.
Needed to replace washer counter balance. Also order shock absorbers in case they needed to be replaced, fortunately they didn't need replacement and will be returned. I used Appliance Parts Pros many time and always found them to be very helpful and the repair videos are very helpful. Read more
Fix 4E error codes and drainage issues with this water level pressure switch. Common when washer drains unexpectedly or won't spin properly.
Removed top panel to reach the hose and sensor. Propped the washer back, reached up to remove bottom hose assembly. Replaced with new hose and new sensor. Put top panel back on. Parts place told me the part was backordered for months and repair would cost at least $80. Got it in three days and fixed it myself. Read more
Washer won't start or shows door lock error? This door lock switch keeps the door secured during wash cycles. DIY repair in 15-20 minutes with video.
First I took off the spring loaded wire ring holding down the seal to the door with needle nose pliers. Pulled back the seal. Removed the 3 screws holding the part on the front of the washing machine. Slid the piece out. Took the protector guard off the off piece and unplug the wires. Put the wires into new part. Put the protector on the new part. Slid the part back into place. Screwed it back in. Put the seal back on. Put the wire spring loaded ring back around the seal. Total time 15 minutes... Read more
Replacement glass panel for washer door. Installs on front-load washer doors. Order when glass is cracked, shattered, or broken. Includes installation video.
I looked up my model number on the site, and found my parts needed. J then watched a video from repair clinic on you tube. The video was sr sight forward, and made the repair easy. I have repaired washers and dryers for numerous people following the same process. Doing this has saved hundreds of dollars in labor charges. Read more
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose. Read more
Traps lint, coins, and debris to protect your washer's drain pump. Replace if clogged, leaking, or threads are damaged. Confirm fit with your model number.
Looking at the schematics from the manufacturer, I could not tell if it was suppose to have a washer. I called Appliance Parts Pros and the gentleman looked at the part he had in stock and found it did require a washer. Not really happy about it, but paid to have it repaired. Thank you Appliance Parts Pros! Read more
Replacement hex screw for dryers. Fastens internal components securely in place. Order when original screws are stripped, missing, or lost during repair.
Suspension spring hanger for washers. Installs inside the cabinet to support the drum. Replace if cracked, broken, or worn to restore proper stability.
Fix a washer door that won't unlock after spin cycle. This door lock switch secures your washer door during operation and releases it when complete.
If water pools under your washer or drains slowly, a damaged drain cap may be the cause. This cap prevents leaks and controls water flow during cycles.
At first I thought it was the bearing, but when I got it apart I found the main shaft had corroded from possibly the soap powder and bleach combo build up on the part. After I cleaned it all up I found one of the three mounting braces was cracked and causing the unit to shake during the spin cycle. Once I replaced that part and replaced a few missing parts I lost all found on your store the unit went together just as it came apart and works excellent. Read more
Front outer tub assembly for front-load washers. Replace if cracked, damaged, or the lip is shredded. Holds water during wash cycles and houses the drum.