Whirlpool Wmh73521cs5 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8206232A
The 40W Light Bulb is an OEM replacement part for Whirlpool microwave ovens. It is a standard-size bulb designed to provide illumination inside the microwave cavity, allowing you to easily view and monitor the cooking or reheating process.
Symptoms of a faulty microwave light bulb include:
- Dimming or flickering light during operation
- Complete bulb failure or no illumination within the cavity
- Discoloration or physical damage to the bulb itself
Causes of a bad microwave light bulb can include normal wear and tear over time, electrical surges or voltage fluctuations, or physical impact or vibration during use.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave oven models.
Do-It-Yourself Stories from Customers like You
Several keys on the touchpad unexpectedly stopped working (ie start cancel setup vent fan light cook reheat soften/melt & defrost quick defrost) George W. S. • Kennesaw , GA • October 08, 2016
After extremely poor support from WhirlpooI and researching numerous U-Tube videos, I fully troubleshot potential failed components and connections. All appeared to function properly, so I reassembled the unit and experienced the same problem as before. I then narrowed down the problem to either the Touchpad ($57+$8 shipping) or the control board ($295+shipping). If those did not work, then a new Microwave of better quality, reliability and support than original microwave, Unfortunately,...
Read more
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Genuine Whirlpool part
By: Whirlpool
Part Number: 8206230A
Removes smoke, grease, and cooking odors from your microwave vent. Replace every 6 months or when filter indicator prompts. Slides behind top grille.
Do-It-Yourself Stories from Customers like You
Low airflow through vent; filter service indicated on display Brent E. • Mountain View , CA • March 20, 2014
Replacing this filter was very easy: two screws hold in the grill cover at the top of the microwave, and then the filter just slides in and out of its holder. There was quite a bit of grease in the area, probably pulled there by the vent from the stove top. I cleaned the grease up and also hand-washed the wire-mesh filter on the bottom of the microwave with soap and warm water. Airflow when running the vent is now noticeably better.
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Whirlpool part
By: Whirlpool
Part Number: W10727360
Fix a microwave that won't start, runs with door open, or requires slamming the door. This door switch is a common fix for intermittent operation issues.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: W10269458
Microwave displays 'close door' message or won't start? The door interlock switch is likely failed. Moderate DIY repair—replace all 3 switches together.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$31.59
- Compare At:
-
$37.59
- You Save:
-
$6.00
Genuine Whirlpool part
By: Whirlpool
Part Number: W11025649
Wall mounting plate that secures and stabilizes your over-the-range microwave. Replace if cracked, bent, or missing for safe, proper installation.
Do-It-Yourself Stories from Customers like You
Bought a display model and it did not have the mounting bracket or any other hardware Aj H. • San Antonio , TX • September 03, 2014
Ordered mounting bracket but was surprised to find that the bracket model number had changed many times from the manufacter date of the microwave vent unit. Was hesitant if I was ordering the right part but I trusted the cross referencing of appliance parts pro and I got the exact bracket that I needed
Read more
More
$19.33
- Compare At:
-
$23.00
- You Save:
-
$3.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10156813
Microwave won't start or shows door open error? The bottom interlock support ensures proper door latching. Moderate DIY repair—access control panel.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8206419
The Microwave Top Interlock Support is an OEM part for Whirlpool microwave ovens. It is an essential safety component that helps ensure the microwave door is securely closed and locked before the microwave can operate.
Causes of a faulty Top Interlock Support include physical damage from impact or wear over time, as well as failure of the internal mechanisms that detect the door's position.
Symptoms of a bad Microwave Top Interlock Support include:
- Microwave does not start or operate when the door is closed
- Door appears closed but microwave will not run
- Microwave starts with the door open, posing a safety hazard
- Error codes related to the door interlock system
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$20.38
- Compare At:
-
$24.25
- You Save:
-
$3.87
Genuine Whirlpool part
By: Whirlpool
Part Number: W10210871
Replace your microwave's light socket if the bulb won't illuminate or flickers. This socket powers the interior bulb for safe cooking visibility. Verify fit by model number before ordering.
Do-It-Yourself Stories from Customers like You
The exterior light bulb failed the bulb had broken away from the socket and was hanging by the wires David R. • Buxton , ME • October 27, 2017
In order to get the bulb screw base out of the socket I had to remove the bottom metal panel and remove the the bulb base. Once I removed the socket, I noticed that the one of the electrical solderless connectors was corroded and burned. I replaced the connector, socket, and bulb. Works great now.
Read more
More
$10.71
- Compare At:
-
$12.64
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8169704
Metal screw for mounting microwaves to upper cabinets. Replace if lost, stripped, or damaged during installation. Installs with screwdriver.
Do-It-Yourself Stories from Customers like You
Bought used microwave and needed mounting parts Robert M. • New Lebanon , OH • April 25, 2016
Installed mounting bracket. Redrilled top screw holes. No template for hole locates but plenty of options to make sure you get a stud. Very easy to install.
Read more
More
$8.56
- Compare At:
-
$10.10
- You Save:
-
$1.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337248
If your microwave turntable won't spin or rotate, the coupler may be broken or missing. This small part connects the motor to the tray for even cooking.
Do-It-Yourself Stories from Customers like You
We purchased a discounted microwave it was not fully equipped with its accessories Paul C. • Roseville , CA • September 16, 2018
I have used appliance parts pros before, their website is easy to use. I typed in the model and serial numbers, of course the number I have is rare, It did not show up on the list of models. It made me a little hesitant to submit the order. All three products came in the same box and on the same date it was promised. Just after opening the package I put everything in the microwave and I was relieved when everything fit perfectly.
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: W10562613
The Interlock Cam Plate is an OEM part for Whirlpool microwaves. It is responsible for securing the microwave door to notify the unit that the door is closed. It works in conjunction with other components to ensure proper alignment and engagement of the door. This allows the microwave to function safely and efficiently.
Causes of a faulty interlock cam plate can include wear and tear over time, damage due to regular use or mishandling, or malfunctioning internal components. These factors can result in issues such as the door not closing properly, difficulty in starting or operating the microwave, or safety concerns.
Symptoms of a bad interlock cam plate may include:
- The door not closing or latching properly
- The microwave not starting or operating when the door is closed
- Flickering interior lights
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11707984
Microwave has no power or won't heat? A blown thermal fuse is often the cause. This safety part protects against overheating. DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
Door latch broke also causing the fuse to blow James M. • Ocean View , NJ • April 28, 2017
It is difficult (if not impossible) to remove the electronic switches from the hard
plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed.
Read more
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Whirlpool part
By: Whirlpool
Part Number: 8184109
The Motor Spacer is an OEM part for Whirlpool microwaves. It is designed to support and position the turntable motor, ensuring it stays aligned and functions correctly. This spacer helps maintain the stability of the turntable, allowing even and consistent heating of food.
Causes of a bad motor spacer can include wear and tear over time, physical damage from heavy use, or misalignment due to accidental impacts. Regular inspection and maintenance can help identify issues before they lead to motor malfunction.
Symptoms of a bad motor spacer include:
- The turntable not rotating properly
- Unusual noises coming from the turntable area
- Inconsistent heating or cooking of food
- The turntable being unsteady or wobbling
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The turntable in the microwave stopped going around. David J. • Happy Valley , OR • November 20, 2017
Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843943
Air damper assembly for over-the-range microwaves. Installs at top exhaust opening to control airflow direction. Replace if cracked, missing, or broken.
Do-It-Yourself Stories from Customers like You
Microwave vented into kitchen Henry T. • Brighton , CO • April 21, 2014
Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved.
Read more
More
$60.52
- Compare At:
-
$72.62
- You Save:
-
$12.10
Genuine Whirlpool part
By: Whirlpool
Part Number: W10190018
Template guides installation of over-the-range microwaves, ensuring correct cabinet alignment and hole placement. Replace if missing or damaged during install.
Do-It-Yourself Stories from Customers like You
One of the mounting nuts fell into the cabinet Steven R. • Boulder Creek , CA • February 04, 2018
Watched a You tube video, showed how to remove bottom, unhook wiring, then proceed to top case. Once removed, case is turned upside down so the capture nut can be installed. Part fit perfectly and BAM, done. Case refitted and finished. Part arrived in 2 days. Great service.
Read more
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Genuine Whirlpool part
By: Whirlpool
Part Number: W11402532
Replacement glass turntable tray for microwaves. Sits on support rollers to rotate food during cooking. Order if original is cracked, chipped, or broken.
Do-It-Yourself Stories from Customers like You
Micro glas tray broke in travel in motorhome Ellen Jean C. • Tarpon Springs , FL • November 21, 2015
Ordered a new one cheaper from you than whirlpool
Read more
More
$54.25
- Compare At:
-
$64.02
- You Save:
-
$9.77