Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Wlsr2000gww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer End Cap
Genuine Ge part
By: Ge
Part Number: WH42X22575

Replacement end cap for washer left-side assembly. Secures cabinet alignment and protects internal components. Needed when original is cracked or missing.

More
$32.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Tub Shield
Genuine Ge part
By: Ge
Part Number: WH45X10046

Protects the washer's inner drum edge and prevents clothing from snagging on the tub lip. Replace if cracked, broken, or missing to avoid fabric damage.

More
$26.79

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Self-Leveling Bracket
Genuine Ge part
By: Ge
Part Number: WH46X10094

Self-leveling bracket for top-load washers. Mounts to the base to stabilize the unit. Replace if broken, bent, or missing to restore proper leveling.

More
$52.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Weld Asm Rod Support
Genuine Ge part
By: Ge
Part Number: WH46X10270

 

More
$131.80

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Support Apron Conversion Kit
Genuine Ge part
By: Ge
Part Number: WH49X20925

Converts older 3-piece washer support apron to one-piece design. Replaces sagging, bent, or broken apron brackets that cause motor clearance issues.

Do-It-Yourself Stories from Customers like You Motot bracket rubbing on bottom housing   Scott P. • Pinckney , MI • February 01, 2017

Following the video instruction. Very easy used putty knife,needle nose plyers and a electric drill driver to remove the sheet metal screws/nuts. Read more

More
$154.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Panel Plug Insert
Genuine Ge part
By: Ge
Part Number: WH02X10258

Replacement plug insert for washer control panels and cabinet surfaces. Snaps into pre-drilled holes to cover openings or secure components. Needed when original plug is missing, cracked, or broken.

More
$4.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Conduit
Genuine Ge part
By: Ge
Part Number: WH41X10036

 

More
$14.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Conduit Sleeve
Genuine Ge part
By: Ge
Part Number: WH41X10161

Protective conduit sleeve for washer electrical wiring. Installs between control panel and base. Replace if cracked, worn, or missing to protect wires.

More
$4.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Base Assembly
Genuine Ge part
By: Ge
Part Number: WH46X10079

Base assembly for washers. Installs at the bottom of the cabinet to support the machine. Replace if cracked, damaged, or structurally compromised.

More
$309.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Fastener Wire Harness
Genuine Ge part
By: Ge
Part Number: WH02X10257

 

More
$8.12

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Washer Tub Dampening Strap 2-Pack
Genuine Ge part
By: Ge
Part Number: WH01X39337

Replaces broken or worn tub dampening straps that stabilize your washer's inner tub during operation. Restores proper suspension to reduce vibration.

Do-It-Yourself Stories from Customers like You GE washer sounded like jet engine during spin cycle   Scott V. • Centreville , VA • August 26, 2020

My 9-year-old GE washer, in which I replaced the motor two years ago, developed an extremely loud roaring sound during the spin cycle. After reviewing stories here to pinpoint the problem, I replaced the tub bearing, mode shifter, and tub seal. I also installed a new tub nut, split washer, and belt. This repair involves taking the washer apart in order to get at the tub bearing and mode shifter, which are inconveniently located in the very center of the machine. I bagged labeled all the... Read more

More
Best Seller
Tub Bearing Split Ring
Genuine Ge part
By: Ge
Part Number: WH02X10265

This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation. 

Symptoms of a bad Tub Bearing Split Ring include:

  • Excessive vibration or tub imbalance during spins  
  • Loud clunking, knocking or grinding sounds  
  • Reduced spin speeds or inability to achieve high RPMs
  • Premature tub or bearing wear requiring replacement

Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.

This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models. 

NOTE: For the washer outer tub seal order WH02X10383.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e   Gerald P. • Auburn , GA • January 28, 2018

I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more

More
Best Seller
Knob Clip
Genuine Ge part
By: Ge
Part Number: WH01X10106

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.  

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

  • The control knob is loose or falls off the panel easily.
  • Difficulty in adjusting settings due to a loose knob.
  • The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I was unable to select a cycle knob wouldn't advance and stay   Tamara I. • Hatfield , PA • September 23, 2014

I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more

More
Best Seller
Agitator Assembly
Genuine Ge part
By: Ge
Part Number: WH43X10033

The Agitator Assembly is an OEM part for GE washing machines. This part moves clothes through the water and detergent during the wash cycle. This part ensures thorough cleaning by creating the necessary motion to distribute and cleanse laundry evenly. 

Causes of a bad Agitator Assembly can range from wear and tear over extended use, to damage from overloading the washing machine, or even issues with the drive mechanism that powers the agitator's motion.

Symptoms of a bad Agitator Assembly include:

  • Clothes coming out of the wash still dirty or not as clean as expected
  • The washing machine making unusual noises during the wash cycle
  • The agitator not moving during the cycle or moving erratically

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken agitator   Timothy H. • Pottsville , AR • July 19, 2015

Replaced the broken agitator on my GE washer & couplin. Took a flat rope placed under the old agitator and with a stern jerk it popped off. Then a 7/16 socket set with a long extension took the bolt lose, and removed the couplin. Replaced the new couplin, with the new bolt tighten. Slide the new agitator into place with a stern push it snapped in place. Works perfectly. Thank you for the fast shipping. Read more

More
Washer Top
Genuine Ge part
By: Ge
Part Number: WH44X21834

The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.

Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.

Symptoms of a bad Washer Top include:

  • Visible cracks, dents, or damage to the top panel
  • Difficulty opening or closing the lid due to misalignment or warping
  • Water leaks around the top area during wash cycles
  • Excessive noise or vibration caused by a loose or damaged top

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The lid and the top we’re both rusty and paint coming off.   Paul D. • Lilburn , GA • January 26, 2018

I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more

More
Timer
Genuine Ge part
By: Ge
Part Number: WH12X10338

The Timer is an OEM replacement part for GE washers. The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

Causes may involve minor power surges exposing delicate components to uncontrolled fluctuations overtime. General wear from years of activating various thermal, agitation and spin functions can degrade sensitive electronics as well.

Symptoms of a bad timer include:

  • Erratic or inaccurate countdown between cycles
  • Failure to switch automatically between rinse and spin
  • Locked buttons or controls suggesting circuit board issues
  • Inability to modify or set desired cycles and options

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore model washing machines.

Do-It-Yourself Stories from Customers like You The knob on the timer wouldn't engage   James S. • Worden , IL • January 02, 2015

Replaced the knob and timer, the lugs were stripped out on the knob and damaged on the timer Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google