Wm4000 Parts

Watched a whole bunch of YouTube videos to replace the tub bearings. Completely disassembled the washing machine. Found that water leaked past the rear tub gasket causing the inner tube bearing to corrode. Replaced both bearings and tub gasket. Inner bearing was the cause of the problem but I replaced both bearings and tub gasket. Read more

Wendy on the phone was very helpful. WM3997HWA/01 is an all-in-one washer/dryer from 2017 and does not have a rotor position sensor on the stator. She helped determine that Stator Assembly AJB73816004 was the fix. There is also a 00 or 01 after the model number which can be found on the serial number tag when you open the door that identifies the different series. Easy repair to take on. Hope this helps. Read more

I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on... Read more

Technician wanted $700. I was able to fix it myself for around $300 in about a half hour with the great and helpful customer service of appliancepartspros.com. Parts arrived on time. Nice to know there is a company that really cares and they know there stuff. Read more

I looked online ans read where the tE error code meant the thermistor was bad. I then found a video on YouTube showing how to replace the part. On AppliancePartsPros.com I chatted with a technician that told me the thermistor on my particular model was built into the heater unit and he gave me the link to purchase it. After it arrived via FedEx I followed the repair video and installed it myself (I'm a girl). So far I have run about a half dozen loads and no problems! Thank you so much... Read more

Replaced water inlet valve Read more

I originally thought the washer had a bad bearing, but once I got it disassembled it the spider arms were broken. This required the replacement of the tub assembly. While replacing the tub I replaced all of the water bellows. The parts came quickly, the live chat and videos were very helpful. This washer has to be completely disassembled to replace the drum, so mark all the screw locations, tag and bag everything and take lots of pics. It was a very rewarding project and hundreds of dollars... Read more

A new deteerrgent dispenser. Read more

I started by watching the video and it was very helpful. I would make one suggestion. On our model the weights on the tub sit very close to the front gasket. It is much easier to put the gasket on the tub before you put the weights on. Also, since the washer was tore apart, I replaced the hoses and seals and shocks since the machine is about 8 years old. The shocks made a huge difference. It spins like it did when it was new. Thanks for the video, it was very helpful. Read more

I went to your web site found the part using the model number of the washer machine. Also with the part picture, there was a video showing step by step instructions. They were very clear and was breeze replacing the hose.Doing this myself saved at least probably $150-200. Appliance repair shops quoted me around $80.00 just to come out. Then they mark up the price of the hose at least twice the cost of what I paid , They too have to order the part and come back to install. So the labor was what... Read more