Wmh32519hz Parts

The Interlock Spring is an OEM part for Whirlpool microwaves. It is located within the door assembly and provides proper tension to assist with smooth opening and closing of the microwave door. The spring allows for controlled movement that facilitates easy access when using the microwave.

Causes of failure could be normal wear and tear over time, damage from rough or forced handling of the door, or failure from excessive use.

Symptoms of a bad microwave spring include:

• Difficulty opening or closing the door
• The door not staying securely closed or popping open on its own
• Excessive vibration or noise related to door operation

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

The Charcoal Filter is an OEM replacement part for Whirlpool microwaves. Containing activated charcoal fibers, this filter eliminates odors from foods being cooked inside the microwave.

Causes can be the natural saturation of the charcoal after extended use cycles. The material reaches its adsorption capacity.

Symptoms of a bad charcoal filter include:

• Lingering food smells within the microwave interior
• Odors transferring to other foods during subsequent reheating
• Decreased ability to absorb offensive smells over time

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This microwave turntable motor drives the glass tray to rotate food for more even heating. Replacing the motor restores smooth, consistent rotation and dependable cooking performance.

• Drives the turntable during cook/defrost cycles for more uniform heating
• Turntable won't turn or only turns intermittently
• Jerky movement or tray requires a push to start
• Humming, grinding, or clicking from beneath the tray area

• Disconnect power by unplugging the microwave or switching off the breaker before servicing; microwaves contain high-voltage components that can retain a charge
• Remove the glass tray and support ring before accessing the motor
• Access is typically from the bottom panel; note wire connections and motor orientation before removal
• After installation, ensure the coupler engages properly and the tray spins freely

The Hardware Kit is an OEM part for Whirlpool microwaves. This kit includes essential mounting brackets, screws, and other fasteners required for the proper installation and secure mounting of the microwave, either over the range or within cabinetry.

Causes of a bad hardware kit can include wear and tear over time, exposure to moisture, or damage due to mishandling or incorrect installation.  

Symptoms of a bad hardware kit include:

• Loose or unstable microwave installation
• Rattling or vibrating noises during operation
• Difficulty in mounting or securing the microwave
• Visible rust or damage to screws and brackets

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Reflector is an OEM part for Whirlpool microwaves. It is located inside the microwave cavity behind the waveguide and works to redirect electromagnetic waves for more even cooking.  

Symptoms of a damaged reflector include:

• Inconsistent or incomplete heating of foods during cooking
• Hot and cold spots forming within the microwave cavity
• Lower overall power output from the microwave

Causes of reflector damage can be cracking or pitting of the reflective aluminum surface over multiple heating cycles. Impact incidents from user error may also damage its shape.

This OEM Whirlpool replacement assists in delivering uniform energy distribution for optimal microwave performance. This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper microwave models.

This microwave magnetron is the high-voltage tube that creates the microwave energy used to heat and cook food. Replace it to restore heat when the unit runs but doesn't heat or makes an unusually loud electrical hum.

• Produces the microwave energy that cooks food inside the oven cavity
• Common failure sign: microwave runs but does not heat
• May be accompanied by a loud humming/buzzing or a burning odor near the magnetron area
• Note: Similar no-heat symptoms can also be caused by the high-voltage diode, capacitor, or transformer—diagnose before replacing

• Unplug the microwave and discharge the high-voltage capacitor before servicing; lethal voltage is present
• Access typically requires removing the outer cabinet; document wire locations and screw positions for reassembly
• Handle the ceramic antenna carefully; ensure the waveguide cover/seal and all shielding screws are intact and reinstalled

This microwave rack restores the elevated cooking surface your oven was designed for. Replace a missing, bent, or flaking rack to safely support multi-level reheating and make full use of your microwave's capacity.

• Provides a stable, elevated surface for two-level or batch cooking when your model supports it
• Seats on the factory interior support guides for correct clearance and placement
• Replaces a rack that is missing, warped, or has damaged coating that may cause sparking
• Helps restore even results when using multi-level cooking

• Allow the oven to cool; open the door and place the rack on the designated interior support guides
• Ensure the rack sits level and does not touch the cavity walls before starting a cycle
• Use only as directed in your model's Use & Care Guide; remove the rack when not needed

The Nut is an OEM part for Whirlpool microwaves. It helps secure various parts within the microwave, ensuring proper assembly and function. It is used to fasten items, keeping them securely in place during use.

A bad microwave nut can occur due to wear and tear over time or accidental damage. If the nut becomes loose, stripped, or misplaced, it can lead to instability and compromise affected parts.

Symptoms of a bad microwave nut include:

• Loose or wobbly parts.
• Difficulty in operating the microwave.
• Unusual noises or vibrations during use.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

This magnetron capacitor is the microwave high-voltage capacitor that helps supply the magnetron with the pulse of energy needed to produce heat. Replacing a failing capacitor restores normal heating performance and reduces arcing or loud humming. What it does

• Stores and releases the high-voltage pulse required by the magnetron so the microwave can generate heat.
• Prevents unstable magnetron operation that can cause weak or no heating.
• Common symptoms of a failing capacitor: oven runs but doesn't heat, intermittent heating, loud buzzing/humming, or visible arcing inside the cavity.
• A failed capacitor can also cause blown internal fuses or tripped circuits.

• One capacitor.

• Disconnect power and verify the appliance is completely de-energized before servicing.
• Capacitors can hold dangerous charge; discharge the capacitor safely with an insulated tool.
• Use the exact replacement part and follow the appliance service manual for routing and connections.

Note: In some cases the original board had a wire harness connection at P9 for an NTC thermistor. The newly designed board has the NTC thermistor built into the board and the wiring connection is no longer required.

Note: This coupler is compatible with the glass tray that has the 3 triangles that engage the coupler. In some cases, the factory used a tray that has 3 half-circles. For that coupler, use part# W10435116.

The support is an OEM part for Whirlpool microwaves. This motor coupler works to connect the microwave's motor to the turntable shaft, transferring power from the motor to turn the turntable.

Causes of a bad motor coupler can include wear and tear over time, excessive use of the microwave leading to deterioration of parts, or damage due to impact or mishandling.

Symptoms of a bad motor coupler include:

• The turntable not spinning or rotating unevenly
• Grinding or clicking noises coming from the microwave interior
• The turntable shaft being loose or out of alignment

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Mounting Nut Assembly is an OEM replacement part for Whirlpool microwaves. It securely fastens the microwave to its mounting bracket, ensuring stability and safety during operation. It provides a secure and reliable connection, preventing the microwave from shifting or falling during use.

A bad mounting nut can occur due to various reasons, such as wear and tear, improper installation, or accidental damage. If you notice symptoms such as the microwave becoming loose or wobbly, or if the mounting nut is missing or damaged, it may be time to replace it.

Symptoms of a bad microwave installation mounting nut include:

• Microwave becoming loose or wobbly
• Missing or damaged mounting nut

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Grey

This support is a factory mounting piece that secures and aligns its mating component inside the appliance. Replacing a worn or broken support restores proper fit, stability, and smooth operation of the associated assembly.

• Provides structural support and accurate positioning for the designated part
• Helps prevent sagging, looseness, and vibration
• Maintains alignment so components latch/seat correctly
• Typical failure signs: cracked or missing support, rattling, misalignment, or parts that won't stay in place

• Disconnect power before servicing; also shut off the water supply
• Note the original orientation; transfer any screws, clips, or spacers from the old support
• Install without overtightening to avoid damage; secure fit of the supported component after installation

The Humidity Sensor is an OEM part specifically designed for Whirlpool range hoods. It monitors moisture levels above the cooktop. 

Causes of a faulty humidity sensor can include residue buildup or physical damage interfering with sensitivity.

Symptoms of a bad humidity sensor include:

• The hood fan failing to automatically activate after steamy cooking  
• Fan speed not appropriately adjusting based on moisture readings
• Error codes showing on any connected control panels

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore hood models.