Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Wprb9220 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Tub Bearing Split Ring
Genuine Ge part
By: Ge
Part Number: WH02X10265

This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation. 

Symptoms of a bad Tub Bearing Split Ring include:

  • Excessive vibration or tub imbalance during spins  
  • Loud clunking, knocking or grinding sounds  
  • Reduced spin speeds or inability to achieve high RPMs
  • Premature tub or bearing wear requiring replacement

Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.

This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models. 

NOTE: For the washer outer tub seal order WH02X10383.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e   Gerald P. • Auburn , GA • January 28, 2018

I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more

More
Best Seller
Washer Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WH13X10024

If your washer won't fill, overfills, or leaks when off, the water inlet valve may be faulty. Simple 10-20 minute DIY repair with basic tools.

This part fixes the following symptoms
  • No hot or cold water
  • Will not fill with water
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You There was a small water leak into the tub when the washer was off   Jack C. • Atlanta , GA • July 16, 2014

Ordered water inlet valve. Two screws to take out. Disconnect the hose. Disconnect the two wires. Put in the new valve. Reverse the procedure. Whole thing took about 10 minutes. Read more

More
Funnel Bleach
Genuine Ge part
By: Ge
Part Number: WH01X10057

 

Do-It-Yourself Stories from Customers like You Broken bleach funnel   Richard M. • Huntsville , AL • April 10, 2018

Took out the broken one and snapped the new one in , done. Read more

More
Drain Hose
Genuine Ge part
By: Ge
Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system. 

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

  • Water leaking from the back or underside of the washing machine
  • Pools of water around the area where the washing machine is installed
  • Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak   Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

More
Drive Motor
Genuine Ge part
By: Ge
Part Number: WH20X10093

This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.

Do-It-Yourself Stories from Customers like You Filled up and ran through cycle but would not agitate or spin   David R. • Ada , OH • July 04, 2014

New motor. The motor was ok, but the control board mounted on the motor wasn't. Can't buy to control board separate from the motor. Easy to replace the motor, but not so easy to troubleshoot to make sure the problem was the motor and not something else. Read more

More
Washer Outer Tub Cover
Genuine Ge part
By: Ge
Part Number: WH49X21274

Outer tub cover that snaps over the washer's outer tub assembly. Replace if cracked, broken, or missing to restore proper clearance and protection.

Do-It-Yourself Stories from Customers like You Washer tub straps and part of cover tub broke   Edwin B. • Chicago , IL • October 13, 2014

I had to remove the front panel of the washing machine and top of the washing machine. i started by removing all the top screws as shown in one of videos. disconnected all the electrical wires (i have a commercial washer) and lifted the front panel over the back of the machine. i was then able to remove the top of the washing machine to give me access to the tub straps and the corresponding screws. i removed the broken straps and then was able to remove the tub cover by pushing down it down... Read more

More
Wireform Hinge (Long)
Genuine Ge part
By: Ge
Part Number: WH1X2743

 

More
Washer Shipping Bar
Genuine Ge part
By: Ge
Part Number: WH46X344

This shipping bar was installed during appliance transport to secure moving parts and prevent damage. It should be removed before first use to allow proper operation of your washer's door mechanism. Remove this bar if your washer door won't open properly or if you hear rattling noises during operation.

More
Clamp Tub Outlet
Genuine Ge part
By: Ge
Part Number: WH01X10134

 

More
Terminal Housing
Genuine Ge part
By: Ge
Part Number: WH12X497

Harness to corset & shifter

More
Filter
Genuine Ge part
By: Ge
Part Number: WH12X10192

 

More
Probe Sensor Atc
Genuine Ge part
By: Ge
Part Number: WH12X10251

 

Do-It-Yourself Stories from Customers like You No hot water after 10 seconds.   Ralph G. • Oxford , OH • January 25, 2018

Ordered water inlet solinoid valve and water temperature probe sensor. Items arrived in a few days. Appliance Parts Pros on-line video was extremely helpful for replacing inlet valve. It only took 20 minutes. Recommend replacing temp. sensor probe while old valve is out before mounting new valve. Only 2 screws-Easy. Entire job took about an hour start to finish. Saved at least $150 doing it myself over repairman and saved $750 over replacing the washer. Happy wife, happy life! Read more

More
Washer Leg And Platform Assembly
Genuine Ge part
By: Ge
Part Number: WH17X10016

Washer leg and platform assembly that supports and levels your washer. Replace if the leg is cracked, broken, or the platform is damaged or missing.

More
Leg & Platform Weld Assembly
Genuine Ge part
By: Ge
Part Number: WH17X101

 

More
Hinge Bumper
Genuine Ge part
By: Ge
Part Number: WH1X2742

 

More
Washer Roll Pin
Genuine Ge part
By: Ge
Part Number: WH2X1188

This small cylindrical pin secures rotating or moving parts within your washer's mechanical assembly. It prevents components from shifting out of alignment during operation cycles. Replace this pin if you hear rattling noises, parts seem loose, or if mechanical functions aren't working smoothly.

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google