Wsm2700wdwcc Parts

The Dryer Belt is an OEM part for GE dryers. This belt wraps around the drum, motor pulley, and tension pulley, enabling the drum to spin during the drying cycle. It plays a crucial role in the mechanical operation of the dryer.

Common causes of a bad dryer belt include normal wear and tear from repeated use, overloading the dryer, or damage from obstructions inside the drum.

Symptoms of a bad dryer belt include:

• The drum not turning when the dryer is running
• A burning smell during operation
• Unusual noises such as thumping or squeaking
•  The dryer stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer Knob is an OEM component for GE washers. It serves as the interface control to set the desired wash cycle time. Constructed of durable plastic with grip textures, the timer knob twists smoothly to select between options.

Causes of a bad timer knob can include cracking or splitting of the plastic material over multiple years of use. The internal mechanisms that assist movement may also degrade.

Symptoms of a bad timer knob include:

• Difficulty twisting the knob to desired settings
• The timer dial constantly moving out of place
• Certain time options becoming impossible to select
• Knob possibly detaching entirely from the control center

This genuine GE OEM replacement part is also compatible with related brands such as Hotpoint, RCA, and select Kenmore models.

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

The V Belt is an OEM part for GE washing machines. This belt connects the drive motor to the washer's drum, facilitating the rotation of the drum during the wash and spin cycles. 

Causes of a bad V belt can include wear and tear from continuous use, stretching, fraying, or snapping due to overloading or improper installation. 

Symptoms of a bad V belt include:

• The washer drum not spinning or agitating
• Unusual noises, such as squealing or slapping, during operation
• A burning rubber smell coming from the washer
• The washer stopping mid-cycle or not completing cycles properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dryer safety thermostat monitors internal temperature and opens the circuit if the unit overheats, protecting the heater and wiring. Replacing a failed thermostat restores proper over-temperature cutoff and safe, consistent drying performance. What it does:

• Monitors air temperature at the heater/exhaust path
• Interrupts power to the heating element if temperatures exceed its limit
• Helps prevent overheating and thermal damage
• Common symptoms can include: no heat, heat cutting out early or overheating, or the dryer shutting off on high heat

• 1 safety thermostat

• Disconnect power before service; for gas dryers, also shut off the gas supply
• Typically mounted on the heater housing or exhaust duct; note wire positions and transfer one at a time
• Secure with existing hardware and ensure tight electrical connections
• After replacement, clean the lint filter, vent hose, and exhaust duct to ensure proper airflow and prevent repeat overheat trips

This drum glide provides a smooth, low-friction surface at the front of the dryer drum. Replacing worn glides restores quiet, even drum rotation and helps prevent scraping and fabric damage.

• Supports the front of the drum and allows smooth rotation on the front bearing/bulkhead
• Reduces friction and metal-on-metal contact to minimize noise and wear
• Helps maintain proper drum alignment and spacing at the door opening
• Common symptoms of a worn glide: scraping or squealing while tumbling, drum hard to turn, brown/black marks on clothes, or snagging at the front edge

• Disconnect power; shut off gas supply for gas dryers before servicing
• Remove the top and front panel/bulkhead to access the front drum support
• Support the drum when the front panel is off to avoid stressing the rear bearing
• Many models use multiple glides; inspect all front support wear items (glides/slides and felt seal) and replace as needed for even wear

This replacement heating element restores proper electric heat inside the dryer so clothes dry consistently and on time. A worn or open element can leave loads damp or extend cycle times; swapping it brings heat output back to spec.

• Generates the electric heat used during drying
• Common failure signs: no heat, long dry times, partial heating, or tripping the thermal cutoff
• Visual cues can include broken/warped coil or obvious burn spots
• Restores normal temperature rise for even drying performance

• Disconnect power before servicing; elements run on high voltage
• Access typically from the front or rear depending on model; note wire positions
• Avoid touching the coil with bare hands; handle by the frame
• Inspect thermostats/thermal cutoff if the old element failed

This is the cycle timer for a washing machine. It controls the sequence and duration of wash, rinse, and spin cycles so the washer progresses through a complete program as selected.

• Rotates internal contacts to switch the motor, pump, fill valves, and spin on and off in order
• Helps resolve issues like a washer not advancing cycles, stopping mid-cycle, or skipping wash/rinse/spin
• Also addresses irregular cycle timing or a timer that won't turn/advance when set

• Disconnect power before servicing; turn off water supply for safety
• Access is typically from the control console; transfer wiring one at a time to matching terminals
• Mount the timer to the panel and ensure the timer shaft aligns with the control knob and dial
• Test a short cycle after reassembly to ensure proper advance through each step

This thermal limiter is the dryer's high-limit thermostat. It monitors temperature and opens the heating circuit if the dryer overheats, helping protect components and allowing the appliance to operate safely.

• Provides over-temperature protection for the dryer's heating circuit
• Opens the circuit when excessive heat is detected to prevent damage
• If failed open, the dryer may run but not heat
• Repeated tripping can cause intermittent heat and longer dry times

• Disconnect power and allow the dryer to cool before servicing; shut off gas supply for gas models
• Handle wiring carefully; transfer leads one at a time and mount the limiter in the original location/orientation
• Use a multimeter to check continuity
• Clear lint buildup and prevent repeat overheating

This dryer blower wheel mounts on the motor shaft to move air through the drum, lint filter, and exhaust duct, helping maintain proper airflow, even drying, and overall dryer performance.

• Moves air through the drum, lint screen, and duct to exhaust moisture and lint
• If the hub is stripped or the wheel is loose on the motor shaft, airflow drops and dry times increase
• Cracked, warped, or broken fins can cause rattling, scraping, or vibration during operation
• Common symptoms include weak air at the vent, longer cycles, or unusual noise from the lower/front cabinet area

• Disconnect power; if gas, also shut off the gas supply. Wear gloves—sheet-metal edges can be sharp
• Access the blower housing by removing the front/lower panel and blower cover as your model requires
• Note thread direction and any retaining nut/clip when removing; transfer any reusable hardware to the new wheel
• Clear lint and debris from the blower housing and ducts; ensure the new wheel spins freely without rubbing before reassembly

Replace a failed dryer timer to restore reliable cycle selection and timing. This dryer control advances the machine through selected cycles so loads run and finish on the chosen program. What it does

• Advances the dryer through cycle steps and governs timed run lengths.
• Used for selecting timed and automatic cycles; coordinates cycle changes.
• Common symptoms: timer won't advance, dryer stays on one cycle, or cycles don't complete.
• Replace when the timer knob fails to turn or cycles no longer respond to controls.

• Disconnect power (unplug or shut off the breaker) before servicing to avoid electric shock.
• Access usually requires removing the control panel and unplugging the wiring harness; keep track of fasteners and connector locations.
• On gas dryers, shut off the gas supply before starting any work.

Keep your dryer drum turning smoothly. This idler & pulley assembly maintains proper tension on the drive belt so the drum rotates quietly and efficiently when the original idler or pulley becomes worn, noisy, or seized. What it does:

• Applies spring-loaded tension to the drive belt for consistent drum rotation
• Provides a smooth rolling surface to minimize belt friction and wear
• Worn/failed parts may cause squealing or chirping, the drum not turning, the belt slipping off or breaking, or a hot rubber smell

• One idler and pulley assembly

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the belt path by removing the necessary panels per your service information
• Pull the idler to release belt tension, remove the old assembly, install the new one, and route the belt correctly around the motor and idler
• Manually rotate the drum to verify belt tracking before reassembly and test run

A replacement rotary control knob that restores reliable manual control of your appliance's temperature and function settings. Replace a cracked, worn, or missing knob to regain safe, precise control of the appliance. What it does

• Fits onto the appliance control shaft and lets you turn and select cooktop/oven functions and temperatures.
• Replaces knobs that are cracked, broken, loose, or that spin on the shaft and won't adjust settings.
• Designed to match the original knob spline pattern for a proper, secure fit.

• Disconnect power (and gas, when applicable) and make sure the appliance is cool before servicing.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the new knob on until fully seated.
• If the old knob is stuck, use a cloth for grip and gently rock while pulling—avoid excessive force.

For complete bearing kit order WE25X10001.

This plug is an electrical wire connector that restores a secure, insulated connection between appliance wiring and components. It helps prevent intermittent power loss and reduces the risk of shorts from damaged or loose wiring. What it does:

• Provides a secure mating point for a component or harness to carry electrical power
• Insulates and protects exposed terminals from contact and shorting
• Replaces cracked, melted, or loose connector housings that cause intermittent operation
• Commonly used when a control, sensor, or motor has lost power due to a failed connector

• Always disconnect power at the breaker or appliance plug before inspecting or replacing electrical connectors
• Match the connector shape and terminal count to the existing harness to ensure proper fit
• Inspect surrounding wiring and terminals for heat damage; replace any damaged wires or terminals to prevent recurrence