Wt1701c Parts

Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.

Dispenses detergent, softener, and bleach during wash cycles. Replace if cracked, clogged, or disintegrated. Confirm fit with your model number.

This customized screw secures factory components in compatible LG appliances. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit so panels, brackets, or assemblies stay properly aligned and safely mounted.

• Fastens a designated component per model design
• Maintains alignment and helps reduce vibration/noise
• Replaces missing, stripped, or corroded hardware
• Common signs: loose or rattling panels, misalignment, or an obviously missing screw

• Disconnect power to the appliance; shut off water or gas if applicable
• Use the correct driver size; support the part being secured
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Transfer any washers, spacers, or caps from the original fastener if required

This clutch housing assembly supports the clutch coupling in the washer's drive system, aligning and securing moving components that shift between wash and spin. Replacing a worn housing restores smooth engagement and consistent agitation and spin performance. What it does:

• Houses and supports the clutch coupling that engages the basket for wash and spin cycles
• Maintains alignment of drive components to help prevent slippage and noise
• Helps transfer motor power to the wash plate/basket through the clutch mechanism
• Common symptoms of a failing part: no or intermittent spin, weak/no agitation, grinding or scraping noises from the bottom of the washer

• One clutch housing assembly

• Disconnect power and water; turn off supply valves before servicing
• Access is typically from the bottom—tilt or lay the washer carefully and support it securely
• Remove rotor/stator and clutch components as needed to reach the housing; note fastener locations and wiring
• After reassembly, rotate the drive by hand to check for binding and run a test cycle to verify agitation and spin

Washer won't start and shows door error code? This door interlock switch assembly fixes DE or DL errors when the lid won't lock. 10-15 minute repair.

Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

The Top Load Washer Coupling Assembly is an OEM component specifically designed for LG brand top-loading washing machines. This assembly connects the agitator shaft to the transmission inside the washer, allowing oscillating motions to be transferred through the transmission from the motor. 

Symptoms include:  

• No agitator movement or flickering motions during wash cycles
• Grinding or clicking noises coming from the motor/transmission area
• Leaks or loose fluid from damaged housing components  
• Shaking or instability of the entire washing machine

Causes of a bad coupling assembly can include material failure from ongoing vibration exposure, loosened connection points allowing unwanted play, or cracks/breaks due to heavy impacts.

Washer won't spin or agitate? This rotor assembly forms the rotating half of the direct-drive motor, restoring basket movement when worn or stripped.

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Washer not heating water or showing tE error? This temperature sensor monitors water temp and signals the control board. Moderate DIY repair fixes temp issues.

This is a friction oil damper that mounts on the lid hinge of a top-load washing machine. It controls the speed at which the lid opens and closes, preventing it from slamming shut or swinging open too quickly. Replace this part if the washer lid drops down forcefully, no longer stays open on its own, or if the existing damper is leaking oil.

Fix washer slipping, grinding, or failure to spin with this clutch housing assembly. Secures clutch coupling to restore proper drive engagement.

Genuine hardware washer that distributes fastener load at assembly joints. Replace if worn, cracked, or causing loose connections. Confirm fit with your model.

Fix detergent not dispensing or residue buildup. This washer dispenser assembly releases detergent and fabric softener at the right time during cycles.

Replacement nut that secures drawer and trim components on compatible LG appliances. It restores a firm, vibration-resistant fastening to help prevent loosening, rattling, or misalignment during normal use. What it does:

• Secures drawer, trim or small mounting brackets to the appliance chassis.
• Helps stop loosened fasteners that cause rattling or misaligned panels.
• Provides proper thread engagement for a stable connection.
• Matches the appliance's original fastening point when used as the listed part.

• Always disconnect power to the appliance before beginning any repair.
• Use the correct-size wrench or socket; avoid overtightening to prevent stripped threads.
• Inspect mating screw/bolt and threads for damage; replace damaged hardware as needed.