Wt4458882 Parts

The Control Board is an OEM component specifically designed for LG front-loading washing machines. Located within the control housing, this printed circuit board directs vital operations like water levels, cycle programming, and temperature regulation. Precise microchip programming optimizes every laundry load.

Symptoms of a bad control board include:  

• Washer failing to initiate cycles or advance phases
• Inability to select desired temperatures, spin speeds, or cycles  
• Erratic sounds, motions, or lights between operations
• Diagnostic error codes appearing on display

Causes of a bad control board can include water damage damaging circuits over time, electrical faults reducing component lifespan, or loose connections inhibiting full communication. Without directing key systems appropriately, the washer cannot efficiently clean clothing and linens.

This LG OEM replacement ensures consistent laundry assistance through long-lasting, dependable performance. Compatible also with Kenmore front-loaders, it provides simple repairs while restoring all functional controls. 

Replacement nut that secures drawer and trim components on compatible LG appliances. It restores a firm, vibration-resistant fastening to help prevent loosening, rattling, or misalignment during normal use. What it does:

• Secures drawer, trim or small mounting brackets to the appliance chassis.
• Helps stop loosened fasteners that cause rattling or misaligned panels.
• Provides proper thread engagement for a stable connection.
• Matches the appliance's original fastening point when used as the listed part.

• Always disconnect power to the appliance before beginning any repair.
• Use the correct-size wrench or socket; avoid overtightening to prevent stripped threads.
• Inspect mating screw/bolt and threads for damage; replace damaged hardware as needed.

Replace a damaged or stripped leveling foot with this leg assembly. It supports the appliance and adjusts for height so you can level it on uneven floors, restoring stability and helping reduce vibration, noise, and movement. What it does:

• Provides adjustable height to properly level the appliance
• Supports the cabinet/frame to keep all corners in firm contact with the floor
• Helps reduce rocking, walking, vibration, and rattling noises
• Fixes: appliance wobbles or is unstable; foot is cracked/missing; threads are stripped; cannot be leveled

• One leg assembly

• Disconnect power and, if applicable, turn off the water supply before servicing
• Carefully tilt or raise the appliance; protect the floor from scratches
• Unscrew the old leg; thread the new leg in by hand and adjust height to level
• Ensure all feet contact the floor firmly and the unit is stable before use

This noise filter assembly conditions AC power to the appliance's electronics. It suppresses electrical interference on the incoming line and helps ensure reliable power to the control so the unit powers up consistently.

• Filters electrical noise on the power input to protect and stabilize control operation
• Helps address symptoms like no power, dead control panel, or intermittent power loss
• A failed or damaged filter may contribute to tripping a household breaker
• Replacement is recommended if the original shows burn marks, cracking, or tests open

• Disconnect power at the breaker before servicing
• Access is typically behind the lower panel or near the power entry; location varies by model
• Note wire positions; move connectors one at a time and secure the ground as originally routed
• Mount in the same orientation and keep wiring clear of sharp edges and hot/moving parts

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

This guide cover is a molded trim piece that shields and supports its mating guide/track, helping the assembly align and operate smoothly while protecting internal components from debris and damage.

• Protects the guide/track from wear and debris intrusion
• Helps maintain smooth alignment and operation of the moving assembly
• Can help resolve issues like rubbing, misalignment, or a loose/missing trim piece
• Restores a clean, finished look after damage or loss

• Unplug power and shut off water before servicing
• Compare the new cover to the original to confirm orientation
• Snap or screw into place per the unit's service manual; do not force
• Verify smooth travel and clearance after installation

This tub cover assembly attaches to the outer tub of the washer, finishing the tub opening and helping keep water and suds contained. Replacing a damaged cover helps prevent leaks and unwanted splashing from the tub rim.

• Forms the protective rim at the top of the tub to reduce splashing and leaks
• Helps guide laundry away from the tub edge during agitation and spin
• Restores a secure, rattle-free fit when original tabs or the ring are cracked
• Common signs it's needed: visible cracks, broken tabs, warped ring, water splashing from the top rim

• Disconnect power; turn off water supply and move the washer for safe access
• Remove the top/lid or surrounding panels as required by the model
• Release retaining clips/screws and any attached guides/hoses from the old cover; transfer reusable parts
• Seat the new cover evenly and snap/secure all tabs before reassembly; run a short fill/spin to check for leaks

This replacement nozzle assembly restores proper flow and distribution within the appliance's system to maintain cleaning performance. Replace a cracked, clogged, or worn nozzle to help prevent performance loss and keep the unit operating efficiently.

• Directs and concentrates flow through the appliance for effective operation
• Helps maintain a sealed path to avoid leaks or loss of performance
• Damage or obstructions can cause reduced cleaning results, unusual noise, or visible leaks/air leaks
• Visible cracks, warping, or a loose connection indicate the nozzle should be replaced

• Disconnect power (and water supply if applicable) before servicing
• Remove the old nozzle per your model's service information; clear any debris from the mating areas
• Inspect related seals/gaskets and replace if worn to ensure a proper seal
• Install the new nozzle securely and test for proper operation and leaks/airflow

This filter assembly is the appliance's line noise filter. It conditions incoming AC power and suppresses electrical interference to protect sensitive controls and help restore stable, reliable power when the original filter has failed. What it does:

• Suppresses EMI/RFI on the AC line to reduce electrical noise reaching the control system
• Helps stabilize power to boards, relays, and motors
• Common failure symptoms: no power, intermittent power, tripped breaker or blown line fuse, burning smell or visible scorching at the old filter
• Also known as a line filter, EMI filter, or noise filter

• 1 filter assembly

• Disconnect power to the appliance before servicing; capacitors in some products can retain a charge
• Note wire locations; transfer leads to identical terminals on the new filter and secure the ground connection
• Mount the assembly firmly in the original location to prevent vibration or wire strain
• After replacement, inspect related fuses and wiring if the old filter showed signs of overheating or surge damage

This is a small OEM washer used with the washer's internal mounting hardware to provide proper spacing and secure fasteners. It helps keep assemblies aligned and prevents hardware from loosening during operation. What it does:

• Acts as a spacer and load distributor for bolts or screws in the washer assembly
• Helps maintain proper alignment of panels or components
• Reduces wear between mating metal parts
• Can prevent fasteners from backing out due to vibration

• One washer as pictured

• Always unplug the appliance and shut off the water supply before servicing
• Access the mounting location per the service manual or parts diagram; replace only like-for-like
• Install with the correct orientation and hardware; do not overtighten fasteners
• If other fasteners or parts are corroded or worn, replace them at the same time

This suspension assembly supports and stabilizes the washer's inner tub to control movement and vibration during wash and spin. Replacing a worn assembly can reduce shaking and noise and help the washer reach proper spin speed for better water extraction. What it does:

• Supports the tub and absorbs vibration to minimize shaking during agitation and high-speed spin
• Helps keep loads balanced and the tub centered at the correct height
• Reduces banging/walking and protects the cabinet and other components
• Symptoms can include excessive vibration, banging, unbalance/UE errors, or the tub leaning/sitting low; clothes may come out wetter than normal

• Suspension assembly

• Disconnect power and turn off water supply before servicing
• Access from the top/rear; support the tub and replace one suspension point at a time to prevent it from dropping
• Wear gloves; springs are under tension and cabinet edges can be sharp
• After reassembly, level the washer and run a test spin to check for vibration

A suspension assembly that supports and stabilizes the washer tub to reduce vibration and restore smooth spin cycles. Replacing a worn suspension helps prevent excessive tub movement and noisy, unbalanced operation. What it does:

• Supports the washer drum and maintains proper tub alignment during wash and spin cycles.
• Absorbs and dampens vibration to reduce shaking, banging, and excessive movement.
• Helps prevent premature wear to bearings, seals, and other suspension components by keeping the tub balanced.
• Common symptoms indicating replacement: loud thumping or banging during spin, excessive rocking, or visible tub sagging.

• Disconnect power and water supply before starting any repair; use a grounded, unplugged work area.
• Remove the washer cabinet or access panel to access the suspension—follow OEM disassembly steps.
• Support the tub when removing/installing the suspension to prevent sudden drops; use appropriate tools and two-person lift if needed.
• Inspect surrounding components (shocks, springs, mounts) for wear and replace as necessary for best results.

A replacement clutch housing assembly that secures the clutch coupling to the washer drive—restores proper drive engagement and helps eliminate slipping, grinding, or failure to spin. Designed as a direct-fit service part for affected LG washers. What it does

• Houses and supports the clutch coupling that links the drive to the transmission.
• Restores reliable transfer of drive force so the tub can agitate and spin.
• Helps stop symptoms like slipping between cycles, unusual grinding or vibration, and failure to spin.
• Replaces worn, cracked, or damaged housings that can cause poor clutch engagement.

• One clutch housing assembly

• Disconnect power and water supply before beginning any repair.
• Access typically requires opening the washer cabinet or back panel; follow your model's service manual.
• Inspect related clutch and transmission components while accessible.

A small fastening nut that secures drawer-related hardware and helps keep moving parts aligned and stable. Replacing a worn or missing nut restores secure attachment and reduces play or noise in the drawer assembly. What it does:

• Holds drawer hardware or related components in place to prevent shifting during use
• Helps maintain proper alignment of sliding or moving parts
• Can eliminate looseness, rattling, or intermittent catching caused by a missing or damaged nut
• Provides a secure threaded connection when used with the matching bolt or stud

• Disconnect power and remove the drawer or access panel before servicing to avoid injury
• Use the correct size wrench or socket; hand-start threads to avoid cross-threading
• Tighten snugly but avoid overtightening to prevent stripping the threads or damaging components
• If the original nut failed due to wear or corrosion, inspect the mating bolt/stud and replace if damaged

This clamp assembly secures a hose or tubing connection to maintain a watertight seal and reduce vibration. Replacing a worn or damaged clamp helps stop leaks and prevents hoses from slipping loose during operation. What it does:

• Holds a hose or tube firmly in place to maintain proper sealing at the connection point.
• Prevents leaks caused by loose, cracked or corroded clamps.
• Reduces vibration and rattling from unsecured hoses.
• Common symptom: visible leaking, water pooling, or a loose hose connection.

• Disconnect power and shut off water supply before starting any repair.
• Use the correct pliers or screwdriver for the clamp type; avoid damaging the hose.
• Inspect the mating hose and seal; replace any cracked or hardened hoses before reinstalling.
• Do not overtighten—tighten just enough to secure the hose without cutting or deforming it.

This replacement holder is a small mounting bracket used to secure components inside the appliance, restoring proper alignment and support so parts sit firmly and operate as intended. Ideal when a cracked or worn holder causes instability. What it does

• Secures internal components or assemblies to prevent movement or vibration
• Restores proper alignment when a damaged holder allows parts to sag or shift
• Helps reduce noise from loose or unsecured components
• Commonly replaced when the original holder is cracked, broken, or missing

• Turn off and unplug the appliance before beginning any repair.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.
• Use appropriate hand tools; avoid forcing parts to prevent further breakage.