Wt4801 Parts

This thermistor assembly monitors water temperature inside the washer tub and relays a precise signal to the control board. Replacing a failed sensor restores accurate temperature sensing and helps prevent cycle errors and performance issues. What it does:

• Measures wash water temperature and sends the signal to the electronic control
• Enables the control to adjust cycle operation based on temperature feedback
• Common failure signs: tE/TE error codes on some models, incorrect temperatures, long cycles, or cycles that won't advance
• Intermittent faults may cause sporadic errors or inconsistent performance

• 1 thermistor assembly

• Disconnect power and shut off water before servicing
• Access location varies by model; the sensor is typically mounted in the outer tub or heater housing
• Unplug the harness, pull the old sensor straight out; seat the new sensor fully and reconnect the harness
• Route wiring away from moving parts; restore power and run a test cycle, checking for proper operation and any leaks around the sensor port

Replacement nut that secures drawer and trim components on compatible LG appliances. It restores a firm, vibration-resistant fastening to help prevent loosening, rattling, or misalignment during normal use. What it does:

• Secures drawer, trim or small mounting brackets to the appliance chassis.
• Helps stop loosened fasteners that cause rattling or misaligned panels.
• Provides proper thread engagement for a stable connection.
• Matches the appliance's original fastening point when used as the listed part.

• Always disconnect power to the appliance before beginning any repair.
• Use the correct-size wrench or socket; avoid overtightening to prevent stripped threads.
• Inspect mating screw/bolt and threads for damage; replace damaged hardware as needed.

Replace a damaged or stripped leveling foot with this leg assembly. It supports the appliance and adjusts for height so you can level it on uneven floors, restoring stability and helping reduce vibration, noise, and movement. What it does:

• Provides adjustable height to properly level the appliance
• Supports the cabinet/frame to keep all corners in firm contact with the floor
• Helps reduce rocking, walking, vibration, and rattling noises
• Fixes: appliance wobbles or is unstable; foot is cracked/missing; threads are stripped; cannot be leveled

• One leg assembly

• Disconnect power and, if applicable, turn off the water supply before servicing
• Carefully tilt or raise the appliance; protect the floor from scratches
• Unscrew the old leg; thread the new leg in by hand and adjust height to level
• Ensure all feet contact the floor firmly and the unit is stable before use

This noise filter assembly conditions AC power to the appliance's electronics. It suppresses electrical interference on the incoming line and helps ensure reliable power to the control so the unit powers up consistently.

• Filters electrical noise on the power input to protect and stabilize control operation
• Helps address symptoms like no power, dead control panel, or intermittent power loss
• A failed or damaged filter may contribute to tripping a household breaker
• Replacement is recommended if the original shows burn marks, cracking, or tests open

• Disconnect power at the breaker before servicing
• Access is typically behind the lower panel or near the power entry; location varies by model
• Note wire positions; move connectors one at a time and secure the ground as originally routed
• Mount in the same orientation and keep wiring clear of sharp edges and hot/moving parts

This is a small OEM washer used with the washer's internal mounting hardware to provide proper spacing and secure fasteners. It helps keep assemblies aligned and prevents hardware from loosening during operation. What it does:

• Acts as a spacer and load distributor for bolts or screws in the washer assembly
• Helps maintain proper alignment of panels or components
• Reduces wear between mating metal parts
• Can prevent fasteners from backing out due to vibration

• One washer as pictured

• Always unplug the appliance and shut off the water supply before servicing
• Access the mounting location per the service manual or parts diagram; replace only like-for-like
• Install with the correct orientation and hardware; do not overtighten fasteners
• If other fasteners or parts are corroded or worn, replace them at the same time

A suspension assembly that supports and stabilizes the washer tub to reduce vibration and restore smooth spin cycles. Replacing a worn suspension helps prevent excessive tub movement and noisy, unbalanced operation. What it does:

• Supports the washer drum and maintains proper tub alignment during wash and spin cycles.
• Absorbs and dampens vibration to reduce shaking, banging, and excessive movement.
• Helps prevent premature wear to bearings, seals, and other suspension components by keeping the tub balanced.
• Common symptoms indicating replacement: loud thumping or banging during spin, excessive rocking, or visible tub sagging.

• Disconnect power and water supply before starting any repair; use a grounded, unplugged work area.
• Remove the washer cabinet or access panel to access the suspension—follow OEM disassembly steps.
• Support the tub when removing/installing the suspension to prevent sudden drops; use appropriate tools and two-person lift if needed.
• Inspect surrounding components (shocks, springs, mounts) for wear and replace as necessary for best results.

A small fastening nut that secures drawer-related hardware and helps keep moving parts aligned and stable. Replacing a worn or missing nut restores secure attachment and reduces play or noise in the drawer assembly. What it does:

• Holds drawer hardware or related components in place to prevent shifting during use
• Helps maintain proper alignment of sliding or moving parts
• Can eliminate looseness, rattling, or intermittent catching caused by a missing or damaged nut
• Provides a secure threaded connection when used with the matching bolt or stud

• Disconnect power and remove the drawer or access panel before servicing to avoid injury
• Use the correct size wrench or socket; hand-start threads to avoid cross-threading
• Tighten snugly but avoid overtightening to prevent stripping the threads or damaging components
• If the original nut failed due to wear or corrosion, inspect the mating bolt/stud and replace if damaged

This tapping screw fastens appliance panels and components for a secure, lasting hold. Replace stripped, rusted, or missing hardware to restore proper fit, reduce vibration and rattling, and keep brackets, covers, and trim tightly in place.

• Fastens metal or plastic panels, trim, or brackets to the appliance cabinet/frame
• Cuts its own threads in pre-drilled holes for a tight, reliable fit
• Helps maintain alignment and reduce movement that can cause noise
• Replace when the original screw is missing, stripped, corroded, or will not tighten

• Disconnect power and shut off water/gas before servicing
• Match the screw's position and length to the original hardware
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any washers or spacers from the original assembly if present

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. It replaces a worn or failed damper to restore proper air distribution and reduce temperature swings. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced temperatures
• Can cause uneven cooling or warm fresh-food compartment when faulty
• May click, stick, or fail to open/close if broken or obstructed
• Works with the refrigerator's control system to adjust airflow based on settings

• Disconnect power before beginning any service to avoid electric shock
• Handle the damper and housing carefully to avoid damage to plastic fins or linkage
• Note orientation and actuator connection before removal to ensure correct reassembly
• Test operation after reinstalling by restoring power and cycling temperature controls

This is a main control board for washing machines. This part controls all of the functions of the washing machine. This includes the filling cycle, washing cycle, draining cycle, and spinning cycle. When this part is faulty, the controls will not work as they are supposed to. The buttons may be pressed and nothing will happen. It is also possible that some functions and cycles will work while others won't. Some users report the washing machine shutting down the door locking. A visual inspection of the main control board could also show signs that it has gone bad, such as if there are burn marks on it. Be sure to disconnect the washing machine from its power source prior to attempting to repair or replace any parts. This main control board is compatible with washing machines that are manufactured by the LG brand. This part is sold individually. It is sourced directly from the manufacturer.

This water inlet valve assembly controls the flow of water from the household supply into the appliance during each fill. Replacing a sticking or leaking valve restores proper filling and helps prevent slow-filling, overfilling, or drip-into-tub issues. Also called a fill valve. What it does:

• Opens and closes to allow the correct amount of water into the appliance during the cycle
• Shuts off water flow at the proper time to prevent overfilling
• Helps ensure consistent fill rate for reliable cycle starts
• Common symptoms may include no fill, slow fill, water continuing to enter when off, or fill-related error codes (e.g., IE)

• One water inlet valve assembly

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water; relieve line pressure before removing hoses
• Label and transfer hoses and wire connectors to the new valve in the same positions
• After installation, turn water back on, check for leaks, and run a test fill