We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave has no power or won't heat? A blown thermal fuse is often the cause. This safety part protects against overheating. DIY repair in 30 minutes.
It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more
Microwave won't heat but hums loudly? The diode regulates power to the magnetron. Test with multimeter—reads one direction only. Moderate DIY repair.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
This small spring is part of the door interlock system in your microwave, providing tension to the safety switch mechanism that detects whether the door is properly closed. It ensures the microwave will only operate when the door is securely latched. Replace this spring if the microwave does not start, runs with the door open, or the door interlock switch is not engaging correctly.
Checked switch with a voltmeter, determined the switch was bad. Ordered a new switch....watched a short how to you-tube video.....and from there.....it was fixed. Read more
This door interlock switch is a safety micro switch that detects whether the microwave door is properly closed before allowing the unit to operate. It is a small, snap-action switch mounted near the door latch mechanism. Replace this switch if the microwave won't start, runs with the door open, or blows a fuse when the door is closed.
Covers the top-front exhaust opening on your microwave. Replace a cracked, broken, or missing grille to restore a clean appearance and proper airflow.
Installed the Vent Grille with a screwdriver Read more
This is a light lens cover that fits over the surface light bulb housing on the underside of an over-the-range microwave. It protects the light bulb and diffuses light onto the cooktop below. Replace this cover if it is cracked, yellowed, missing, or if it no longer snaps securely into place.
When the new bulb didn't want to go in, I felt around and realized the base of the old bulb was still in there. With some effort I got it out and new bulb in, Light cover fit fine, but did not come with a screw to hold it in. That would have been helpful. Read more
Filters grease and particles from vented air in your microwave. Replace when clogged or damaged to maintain air quality. Confirm fit with your model.
Ordered new parts from you and replaced them. Read more
Includes brackets, screws, and fasteners for secure microwave installation. Replace missing, lost, or incomplete hardware from floor models or clearance units.
When I received the mounting hardware it was up in about an hour Read more
Replace a cracked, rusted, bent, or missing microwave rack. Restores stable support and smooth sliding for safe operation. Direct fit replacement.
The parts pro I spoke to on the phone was very helpful in ordering the correct parts. I simply installed the ordered parts inside the convection/microwave. They fit perfectly. Read more
Microwave won't start or light stays off when door closes? The door interlock switch often causes this. DIY repair in 20 minutes with basic tools.
Purchased new ones top and bottom. Parts arrived several days ahead of schedule (thank you) .Found a repair video on YouTube and installed the new parts accordingly. A few tips; since you have to remove the control panel from the microwave take a photo of the connections prior to disconnecting them, this is especially helpful on the relays on the interlocks as the connection type is the same. Also note the cam on the new parts was locked back for easier install, but don’t forget to move... Read more
Microwave won't start or interior light won't turn on when door closes? Replace the door interlock switch. Moderate DIY repair with proper precautions.
Removable metal rack sits above the turntable to create a second cooking level in your microwave. Replace a lost, damaged, or missing rack.
Whirlpool Parts said they no longer carried these replacements. ApplieancePartsPros.com not only had the parts, but shipped them immediately and I had them the next day! Quite impressive. Read more
This turntable support ring sits under the microwave's glass tray and guides smooth rotation for even heating. Replacing a worn or warped ring restores stable, quiet turning and helps eliminate uneven cooking results. What it does:
This is a protective cover that sits over the microwave's magnetron inlet opening inside the cooking cavity. It prevents food splatter and grease from entering the waveguide and damaging the magnetron. Replace it if it is burned, scorched, cracked, or warped - these issues can cause arcing or sparking during operation.
Microwave runs but won't heat food? A failed magnetron is the likely cause. This high-voltage tube generates microwave energy for cooking. DIY repair.
I researched the problem. Found the solution online and ordered parts from AppliancePartsPros.com. It only took a screwdriver to make the repair. The only confusion I had is my model of microwave had a double diode, and the one sent to me (by model number) was a single diode. I wasn't sure what to do, either install the new single one or put the old double unit in. I went with the new single diode, and it works fine. I don't know why the two differences, but it all worked out. Read more
Located on the microwave's interior side wall, this mica sheet protects the waveguide opening. Replace if you see sparking during operation, burn marks on the cover, or holes in the mica material.
Small part needed. Quick fix. Saved my micro. Fast service. Thanks. Read more