Ziss420d Parts

The Gal Bin FF Asm is an OEM part for GE refrigerators. This gallon door bin is designed to hold large containers, such as gallon jugs, in the refrigerator door, maximizing storage space and keeping items easily accessible. The door bin measures approximately 20 inches x 7 inches x 4.5 inches. 

Common causes of a bad bin include cracks from overloading, breakage due to impact, or wear and tear from frequent use.

Symptoms of a bad gallon bin assembly include:

• Cracks or visible damage on the bin
• The bin not fitting securely in the door
• Difficulty in placing or removing items
• The bin falling out or sagging under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The FF Door Gasket 42 is an OEM part for GE refrigerators. This gasket creates a seal around the refrigerator's fresh food compartment door, preventing warm air from entering and ensuring that the cool air stays inside. This helps maintain the internal temperature and improves energy efficiency.

Common causes of a bad door gasket include constant opening and closing of the door, exposure to food spills, and general wear and tear. A compromised gasket can lead to air leaks, reducing the refrigerator's cooling efficiency and potentially causing food spoilage.

Symptoms of a bad door gasket include:

• Warm spots inside the refrigerator
• Increased energy bills due to the refrigerator working harder to maintain temperature
• Condensation or frost buildup around the door seal
• Visible cracks, tears, or deformation in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This halogen light bulb restores bright, reliable illumination inside your appliance, making it easier to check food and read controls. Replace a burned-out or broken lamp to bring back safe, convenient visibility while cooking.

• Provides bright lighting for the appliance cavity or work area
• Direct replacement for a failed, flickering, or shattered bulb
• Helps you monitor cooking progress without opening the door
• Typical symptoms: light won't turn on, intermittent flicker, blackened or broken glass

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Allow the light area and lens to cool completely
• Handle halogen bulbs with a clean cloth or gloves; avoid touching the glass
• Install per your appliance's instructions and ensure the bulb is fully seated and any cover is secured

This air damper assembly regulates the flow of cold air from the freezer into the refrigerator compartment to keep temperatures even. Replace a stuck or broken damper to restore proper cooling and prevent warm spots or food freezing.

• Controls and meters airflow from the freezer to the fresh food section
• Opens and closes in response to temperature control signals to maintain set temperatures
• Helps balance cooling across shelves and drawers for consistent performance
• Failure symptoms include: refrigerator too warm, items freezing in the fresh food section, temperature swings, or clicking/buzzing from the damper area

• Disconnect power before servicing; remove food and shelves to access the damper area
• Remove the damper cover/grille; take out mounting screws or clips and withdraw the assembly
• Position the new assembly squarely in the air channel; reconnect any harness and reinstall covers
• Restore power and allow the refrigerator to stabilize before final temperature checks

The Water Tank Assembly is an OEM part for GE refrigerators. This part stores and supplies water to the ice maker and water dispenser in the refrigerator.  

Common causes of a bad water tank include cracks or breaks from physical impact, freezing and thawing cycles that can cause the plastic to become brittle, or general wear and tear over time.

Symptoms of a bad water tank assembly include:

• Water leaks inside the refrigerator
• Reduced water flow from the dispenser
• The ice maker not functioning properly
• Unusual tastes or odors in the water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Chute Funnel is an OEM part for GE refrigerators. It directs ice from the dispenser to the glass. 

Causes of a bad ice chute funnel can include wear and tear over time, cracking or breaking due to frequent use, or damage from attempting to clear jams or blockages.  

Symptoms of a bad ice chute funnel include:

• Ice spilling or missing the glass during dispensing
• Difficulty in dispensing ice or frequent jams
• Cracks or visible damage to the funnel
• Ice buildup or blockages in the dispenser chute

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Main Control Board Assembly is an OEM part for GE refrigerators. This part manages and regulates various functions of the refrigerator, including temperature control, defrost cycles, and the operation of the compressor and fans.

Causes of a bad main control board can include electrical surges, overheating, or component failures due to age or manufacturing defects. 

Symptoms of a bad main control board include:

• Refrigerator not cooling properly
• Erratic temperature fluctuations
• Unresponsive control panel
• Frequent cycling on and off
• Unusual noises from the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Switch Light is an OEM part for GE refrigerators. It is designed to activate the refrigerator’s interior light when the door is opened and turn it off when the door is closed. This ensures visibility inside the refrigerator, making it easy to locate items even in low-light conditions.

Over time, the switch light can become faulty due to wear and tear, exposure to moisture, or repeated use. These factors can cause the switch to malfunction or become unresponsive.

Symptoms of a bad switch light include:

• The refrigerator light not turning on when the door is opened
• The light staying on even when the door is closed
• Flickering or dimming of the interior light
• No response from the light switch when the door is opened or closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Temperature Sensor Grille is an OEM part for GE refrigerators. This grille covers and protects the temperature sensor, ensuring it accurately measures the internal temperature of the refrigerator.  

Causes of a bad grille can include physical damage from impacts, regular wear and tear, or the buildup of dust and debris that can obstruct airflow.  

Symptoms of a bad temperature sensor grille include:

• Inaccurate temperature readings
• The refrigerator running continuously or not cooling properly
• Visible damage or obstruction on the grille
• The sensor becoming loose or dislodged

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the magnetic door gasket that seals the refrigerator compartment. A tight, intact gasket helps maintain proper temperature and reduces energy loss by keeping warm air out and cold air in.

• Creates an airtight seal between the refrigerator door and cabinet
• Helps prevent temperature swings, frost, and moisture around the door
• Worn, torn, or warped gaskets can cause warm spots, condensation, or doors not closing properly
• Replace if you see cracks, gaps, or if the gasket no longer holds a seal

• Unplug the appliance before service and remove door contents for easier handling
• Gently warm the gasket (hair dryer on low) to relax folds and improve fit
• Transfer and reuse any retaining hardware; seat the gasket fully in the channel
• Check door alignment and perform a dollar-bill test around the perimeter to confirm sealing

This gasket and label assembly replaces a worn or damaged side-by-side refrigerator door seal and its attached label, restoring a proper seal to help maintain consistent cooling and reduce frost buildup. Fits the refrigerator door where original gasket is mounted. What it does:

• Seals the door perimeter to help keep cold air inside and warm air out.
• Helps reduce frost or ice buildup caused by a leaking or damaged seal.
• Addresses symptoms such as visible gaps around the door, excessive frost, or uneven temperatures inside the compartment.
• Includes the attached product/identification label as shipped from the manufacturer.

• Unplug the appliance before starting any work and remove food and door-mounted items.
• Replace the old gasket by loosening any retainer or screws, positioning the new gasket into the retainer, and securing per the service manual; do not force or stretch the gasket.
• After installation, check the door seal around the full perimeter and adjust the door alignment if needed; follow the manufacturer's service instructions for final seating.
• If retainers, clips, or screws are damaged or missing, order those parts separately.

This 15 uF capacitor kit supports an AC motor by providing the phase shift needed to start and run smoothly. Replacing a weak or failed capacitor can help resolve hard-start or no-start issues and restore consistent performance. What it does

• Stores and releases energy to help a single-phase AC motor start and maintain proper torque
• Common symptoms include humming or buzzing without starting, repeated clicking, intermittent starting, or warmer-than-normal temperatures
• Visual clues of failure may include a swollen or cracked housing
• Matched 15 uF rating supports correct motor operation per the original design

• One 15 uF capacitor

• Disconnect power before servicing; verify the capacitor is fully discharged before handling
• Note wire positions; move one lead at a time to the new capacitor
• Match the microfarad (uF) rating to the original part for proper performance
• Secure the capacitor using the existing bracket/strap and route wires away from heat and moving parts

The Bin Assembly Gallon is an OEM part for GE refrigerators. This part fits on the refrigerator door and provide storage for gallon-sized containers, such as milk or juice jugs.

Causes of a bad bin assembly can include regular wear and tear, damage from heavy items being placed inside, or accidental impacts that crack or break the bin.

Symptoms of a bad bin assembly include:

• Cracks or breaks in the plastic bin
• The bin not staying securely in place
• Difficulty in sliding the bin in and out
• Items not fitting properly due to deformation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Defrost Thermostat is an OEM part for GE refrigerators. This part monitors the temperature of the evaporator coil to ensure it remains within optimal operating limits. When the temperature gets too high, the defrost thermostat signals the defrost heater to activate, preventing ice buildup on the coils.

Common causes of failure include electrical malfunctions, wear and tear over time, or physical damage to the thermostat or its wiring.

Symptoms of a bad defrost thermostat include:

• Excessive frost buildup in the freezer
• The refrigerator running constantly or not maintaining the correct temperature
• Water leaks inside the refrigerator due to ice melting and refreezing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The air damper monogram kit is used in refrigerators that include freezers. The main purpose of this component is to balance the way air flows when it leaves the evaporator fan housing. The device will often control how much cold air is moved into the fresh air compartment. It can also be used to move cold air from the refrigerator into the freezer. If this part is damaged, cold air may not go where it should and some parts of the refrigerator may become too warm.If this part is damaged or not working, it should be replaced. Disconnect the refrigerator from power and open the door to find the air damper monogram. It is located where the cold air enters the fresh food area. Access the housing and inspect it for damage. It can be removed to get to the damper components. Check the sensing bulb for issues before removal. Install all parts of the kit or only the ones that are damaged before reassembling the appliance.This is a genuine OEM air damper monogram kit for use with General Electric refrigerators. It is priced individually and sourced straight from the manufacturer.

The Icemaker is an OEM part compatible with GE refrigerators. It is responsible for producing ice cubes and depositing them into the ice bucket or ice storage bin. The icemaker is designed to automatically monitor ice levels and produces just the right amount of ice on demand. 

Causes of a bad icemaker can include mechanical failure or wear of components like the water inlet valve, ice ejector mechanism, or ice mold heater. Minerals or scale buildup can also impact the icemaker's efficiency over time.

Symptoms of a bad icemaker include:

• Insufficient or inconsistent ice production  
• Ice cubes sticking together or malformed shapes
• Leaks or water spills from the icemaker area
• Loud buzzing or grinding noises during the operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.