We use cookies and similar tools for site analytics and advertising. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Light Switch is an OEM part for GE refrigerators. It is located near the top of the refrigerator compartment, and it is activated by the door's movement. When the door is opened, the switch is triggered, turning on the interior light to provide visibility. When the door is closed, the switch is released, turning off the light to conserve energy.
Causes of a faulty or damaged door light switch can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as the interior light not turning on or off properly, or the light staying illuminated even when the door is closed.
Symptoms of a bad door light switch may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replaced the two door switches. Read more
The Refrigerator Evaporator Cover is an OEM replacement part for GE refrigerators. This insulation shield covers evaporator coils to distribute airflow. Causes involve punctures allowing air and moisture bypass, dislodged mounting flanges detaching insulation protection, or deterioration compromising material integrity over years of use. Failures present as:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new evaporator fan, heater coil and fresh food fan. Troubleshooting on youtube, ordered the parts watched the video on how to remove old parts and then how to replace them. Called 3 different repair companies, seems no one will work on this GE French door fridge. I am sure someone with experience could change everything quicker! However, my daughter and I got the job done and the fridge is working great again! The videos on the parts ordering were the biggest help, straightforward and... Read more
This is a condenser fan motor assembly that mounts near the compressor at the back or bottom of the refrigerator. It circulates air across the condenser coils to dissipate heat, helping the compressor run efficiently. Replace this assembly if the refrigerator is running warm, the compressor is overheating, or you no longer hear the fan running when the compressor is on.
Not so easy! The fan is similar to a computer cooling fan but has a rounded housing that slips over a round condenser coil. It slides into a shoe bracket at the bottom. It should slide out towards the back of the refrig by approx 1/2 inch then pull up and out. But the fan shroud wraps around the condenser coil causing you not to be able to slide. You must first take a screw out that supports the condenser coil at the opposite end of the condenser "not easy to get to" then push the coil away... Read more
The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.
Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.
Symptoms of a bad Door Light Switch include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The fix went great. I replaced the right-side door switch and it works great. The switch came as a three prong, and the original was a two prong. I matched the two prong wires with/on where they go on the switch, and it worked great. Next is the left door gasket. I am letting the new door gasket lay flat for a few days to see if the folded kinks/creases will relax out. They do instruct to use very hot water to get the folded shipping kinks out of it and will try that as a last resort. Read more
Ice maker not cycling or producing ice? Stops working after years of use when internal gears wear out. Replacement restores automatic ice production.
A flexible duct or housing that directs airflow from the evaporator fan to circulate cold air throughout the fresh food compartment. Replace if you notice uneven cooling, excessive noise from the fan area, or visible damage to the boot material.
Replaced fan motor in fresh food section, easiest repair I have ever made, took longer to get shelves out than replacing motor.. Read more
Replace your refrigerator's fresh food LED light to restore bright interior lighting. Installs easily when your compartment light fails or dims. Verify fit.
Ordered part and changed it in a couple of minutes Read more
Refrigerator not cooling? Compressor won't start? This inverter board controls compressor speed and cooling. Moderate DIY repair with electrical testing.
Took out the old part and replaced it with the new part. Now all is working. Thank you so much. Read more
Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.
Replace the gear and re-incert the freezer drawer. Read more
Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.
Replaced with a new flapper. Read more
Replacement dairy door bin for refrigerators. Attaches to the door to store butter, cheese, and yogurt. Order if your bin is cracked, broken, or missing.
We found out the part numbers (freezer door shelf/brackets and dairy bin) from the GE website (for Profile model even though we have the basic model). Parts cam 2 days later. No tools were needed to install both items. Read more
The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.
Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.
Symptoms of a bad Connector Gear Pinion include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Fixes slow water dispensing or small ice cubes in your refrigerator. The filter manifold connects your water filter to the dispenser and ice maker.
You need to pull the refrigerator out and disconnect the two water lines. Quick connect is very easy and not even one drop of water leaked. Make note of which water line connects where. The hose with the red mark connected to the input from the wall. The line with the blue mark connected to the line going back into the refrigerator. Open the refrigerator and remove the rear Phillips head screw from the filter holder. With a flathead screwdriver carefully pry the white manifold bracket so it... Read more
Lower drawer gear for bottom-mount refrigerators. Installs on the left side of the freezer drawer assembly. Replace if cracked, broken, or damaged.
Replaced the fan with the part ordered. Required the removal of a shelf and the lower drawer to remove access plate. Read more
Gallon-size door bin that mounts on the left fresh food door to hold large jugs and tall bottles. Replace if cracked, broken, or missing.
Ordered new ones Read more
Secures the crossbar in your refrigerator's interior for stable shelving support. Replace if pin is broken, missing, or worn to restore proper fit.