Lower Small Engine Flywheel Key Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP43-0057
Washer won't start or spin? A broken lid switch actuator prevents the safety switch from engaging. This plastic striker restores proper operation in 5 minutes.
This part fixes the following symptoms
-
Won't start
-
Will not agitate
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
Lid switch Steven I. • Gainesville , GA • July 24, 2016
Replace the broken switch
Read more
More
$49.51
- Compare At:
-
$58.42
- You Save:
-
$8.91
Genuine Bosch part
By: Bosch
Part Number: 00422200
Drum support roller wheel for Bosch dryers. Mounts on axle shafts to stabilize and support the rotating drum. Replace when cracked, worn, or squeaking.
Do-It-Yourself Stories from Customers like You
Squeaking in unison with drum rotation. David F. • Sagamore Hills , OH • December 21, 2017
Replaced front drum roller wheels and rear drum bearing.Pull plug.
Remove 2 screws holding top panel,slide rearward and lift panel off.
Remove all screws from back panel,wiring cover and cord clamp.
Remove back panel and feed cord through hole.No need to remove cord.
Remove 2 screws from heater box and let it drop rearward.Remove belt from
motor pulley and let tensioner rest against motor pulley.This step will trigger the
switch that disables motor if belt breaks.The switch does not reset...
Read more
More
$41.95
- Compare At:
-
$49.50
- You Save:
-
$7.55
Genuine Samsung part
By: Samsung
Part Number: DC97-16782E
Supports and allows the dryer drum to rotate smoothly. Replace if worn, cracked, or causing excess noise. Installs on the rear drum support frame.
More
$110.95
- Compare At:
-
$130.92
- You Save:
-
$19.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10239968
Fix a washer that won't start or stops mid-cycle with a new lid strike. Restores secure lid engagement. Takes about 5-10 minutes to replace.
Do-It-Yourself Stories from Customers like You
Lid lock spring was broke on door. Shannon A. • Kalkaska , MI • October 16, 2017
Ordered the part, removed the broken lid lock, replaced it with the new one. Works fine.
Read more
More
$48.46
- Compare At:
-
$57.18
- You Save:
-
$8.72
Genuine Ge part
By: Ge
Part Number: WE1M569
Dryer door won't latch or stay closed? This strike plate mounts at the door opening to catch the latch securely. Easy DIY repair for reliable closing.
Do-It-Yourself Stories from Customers like You
Dryer door latch was broken Jerry Y. • Greenwood , SC • October 08, 2021
Replaced the three latch parts I got from Appliance Parts Pros.
Read more
More
$7.39
- Compare At:
-
$8.79
- You Save:
-
$1.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-2287
Spring-loaded belt tensioner that keeps the drive belt properly tightened. Replace if worn, seized, cracked, or causing squealing to restore smooth operation.
Do-It-Yourself Stories from Customers like You
The front drum slides rear wheels where both wore out also needed a new filter screen Bryan B. • Ville Platte , LA • March 05, 2016
Un plugged dryer. It was an easy fix, popped the top up. Removed the two screw that held the front on and also unclipped the door switch. Released tension that was on belt and removed drum. Removed old front slides cleaned up area and replaced them. Popped the ring that held the rear drum wheels and placed the new ones with a dab of grease. Un hooked tension spring for idler and removed old one and put the new one in. Make sure you place it through the correct hole and it makes it firmly into...
Read more
More
$103.95
- Compare At:
-
$123.70
- You Save:
-
$19.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10239969
Washer won't start or lid won't latch? This lid strike assembly provides the catch point for secure lid closure. Easy DIY fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Broken door strike Lisa L. • Carlsbad , CA • June 06, 2017
Followed the video instructions on website. Very easy to fix.
Read more
More
$20.38
- Compare At:
-
$24.05
- You Save:
-
$3.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177428
Replacement drum support roller for dryers. Mounts on the axle to support the drum and enable smooth rotation. Replace if worn, cracked, or noisy.
Do-It-Yourself Stories from Customers like You
Making noises when operation Kenneth S. • Manning , SC • March 18, 2016
Had to replace the drum rollers, idler roller and belt. Machine has never been taken apart so it was a learning event as well as cleaning all the internals components. Parts that were purchased fit fine, no problem with figment. More time was spent oncleaning and prepping the machine for the new parts
Read more
More
$61.56
- Compare At:
-
$73.87
- You Save:
-
$12.31
Genuine Samsung part
By: Samsung
Part Number: DC97-18057C
Dryer door won't stay closed? This door latch assembly secures your dryer door during cycles. Easy DIY repair with just 2-4 screws in minutes.
Do-It-Yourself Stories from Customers like You
My samsung dryer door would not latch Clinton B. • Milton , NY • November 13, 2015
Like an idiot, I broke the latch on my Dryer door while removing it to reverse the swing direction. 2 days after ordering the new latch, I attached it with two screws, and all was well. Worked perfectly.
Read more
More
$153.74
- Compare At:
-
$182.95
- You Save:
-
$29.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 241779101
This small permanent magnet is used in supported refrigerator assemblies to actuate a mating reed switch or metal keeper. It helps the appliance recognize a closed position or hold a light cover/door closed for proper operation. What it does:
- Works with a reed switch or ferrous keeper to provide position sensing or magnetic latching
- Helps ensure features dependent on closed position operate correctly
- Can resolve issues where a small cover or door won't stay closed
- Address erratic "door ajar" indications tied to magnetic sensing
What's included: 1 magnet Install notes:
- Disconnect power and water before servicing
- Note the original magnet's location and orientation; polarity matters for proper operation
- Seat the magnet fully in its pocket or holder and align with the mating switch/keeper
- Test the related function before reassembling panels and trim
More
$43.64
- Compare At:
-
$51.93
- You Save:
-
$8.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10208250
Dryer won't start or stops mid-cycle? A broken door strike prevents the latch from catching, so the control can't detect a closed door. Simple fix.
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 137459300
Fix a dryer door that pops open during the cycle with this door latch striker. Restores secure door engagement. Takes under 5 minutes to install.
Do-It-Yourself Stories from Customers like You
Clothes dryer door kept popping open during cycle clothes falling to floor Mark T. • Darien Center , NY • April 07, 2017
Very simple, and fast, replacement of the latch mechanism and strike plate.
Read more
More
$36.41
- Compare At:
-
$42.96
- You Save:
-
$6.55
Genuine Speed Queen part
By: Speed Queen
Part Number: 56461P
Threaded metal shaft that mounts the idler roller in dryers and washer-dryer combos. Replace if bent, worn, or stripped threads prevent secure roller installation.
More
$63.95
- Compare At:
-
$76.74
- You Save:
-
$12.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11398789
This is the door strike pin that engages with the door latch to keep the dryer door securely closed during operation. It is mounted on the dryer cabinet and catches the door latch when the door is shut. Replace this part if the dryer door will not stay closed, pops open during a cycle, or if the strike is visibly worn or broken.
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP354255
A small rubber bumper that cushions and protects appliance doors, drawers or panels to reduce noise and prevent hard contact. Replaces worn or missing bumpers to restore a snug, quiet close. What it does:
- Provides a soft buffer to stop doors or drawers from banging into the cabinet or frame
- Reduces vibration and rattling during operation
- Helps doors and panels sit properly when closed
- Simple, non-electrical part — no wiring or adjustment required
What's included:
Install notes:
- Inspect the mounting hole or surface; clean debris before installing
- Press the bumper into the hole or onto the surface until fully seated; use a blunt tool if needed for tight fits
- Disconnect power to the appliance first and follow OEM instructions
- Remove old adhesive before installing the new bumper
Do-It-Yourself Stories from Customers like You
Broken fill valve John N. • Tumwater , WA • July 14, 2015
The video associated with the part was easy to understand. The actual repair was easy - maybe 10 minutes. But getting the top casing of the washer fitted back over the base was a huge pain. That took 8 tries to finally get it locked in just right. The washer is 20+ years old though.
The parts were all exactly correct and fit perfectly. Shipping time was excellent. Parts arrived in about 2 days with "standard" shipping.
The washer works great now. This is the second major repair I've done...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Frigidaire part
By: Frigidaire
Part Number: 807787702
This is a single drum support roller that helps the dryer drum rotate smoothly during operation. The roller sits on a shaft at the rear or front of the drum and bears the weight of the drum as it spins. Replace this roller if the dryer makes a loud thumping, squealing, or rumbling noise during operation, or if the drum does not turn freely.
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55