Object Stack Blower Wheel Parts
Genuine Ge part
By: Ge
Part Number: WR60X41627
Fix loud fan noise and poor cooling with a new evaporator fan blade. Restores airflow across coils. Moderately difficult install in tight freezer space.
More
$6.65
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH07X10022
Replacement drive pulley kit for washers. Mounts on the motor shaft to transfer power to the drum via belt. Replace if worn, cracked, or wobbling.
Do-It-Yourself Stories from Customers like You
Would not spin Jason L. • Middletown , OH • August 30, 2019
Found the belt was thrown off. Reinstalled the belt and when doing so felt that the pulley was wobbling on the barrel shaft. Took the pulley off and noticed the inside of the pulley was worn badly and needed to be replaced. When received the new pulley and belt easily installed and was working like new.
Read more
More
$124.64
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003149
Replacement wheel assembly for dishwasher lower rack. Includes wheel and clip-on axle. Install when wheels are broken, cracked, or worn causing racks to stick.
Do-It-Yourself Stories from Customers like You
Some parts had melted on the dishwasher rack Steve O. • Red Wing , MN • June 04, 2015
I ordered the parts using the make and model no.s and found it quickly at AppliancePartsPros.com. The parts were correct and snap into place in just 5 minutes I was done and the dish rack worked great. I also ordered a new handle since the old one broke out in the middle about 2 years ago. This repair took another 5 minutes and is working great. Thanks
Read more
More
$14.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WR60X114
Freezer not cooling or making buzzing noise? The evaporator fan blade circulates cold air. Easy DIY fix in under 5 minutes—simply pull off and press on.
Do-It-Yourself Stories from Customers like You
Broken fan blade Thomas H. • West Blocton , AL • April 21, 2014
I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the...
Read more
More
$26.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509869
Leveling leg assembly installs at the front corners of your range. Replace if broken, rusted, missing, or no longer adjusts to level your appliance.
Do-It-Yourself Stories from Customers like You
No leveling leg on display model stove I purchased Stephen F. • Rutherfordton , NC • July 28, 2019
Bought new leveling leg. Took longer to lay the appliance on the side and pick back up, than to install leg.
Read more
More
$12.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WD12X27578
Replacement roller for dishwasher racks. Installs on the rack guide rails to allow smooth gliding in and out. Needed when rollers are cracked or worn.
More
$11.41
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE03X10008
Replacement drum support roller assembly for dryers. Supports and stabilizes the drum as it rotates. Replace if roller is loose, wobbly, or worn out.
Do-It-Yourself Stories from Customers like You
Squeaky dryer Jerry C. • New Orleans , LA • June 19, 2016
Order set of drum rollers. My dryer required four. As long as I was opening up the dryer, dryer, 10 years old, I wanted to replace all of them. Also ordered new belt for Sam reason. Found full manual online. Disassembled dryer, about 20 screws. Replaced rollers, although only one was squeaky. Put it all back together. Took about 3 hours.
Read more
More
$58.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240210-2
Replaces a worn or stripped shaft-and-pinion assembly in your stand mixer. Installs in the geartrain to transfer motor rotation to driven components.
Do-It-Yourself Stories from Customers like You
Worm gear stripped Stephen R. • Terre Haute , IN • August 10, 2015
REPLACED WORM GEAR AND OTHER GEARS SHOWING WEAR
Read more
More
$16.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH16X34317
The Blower Wheel is an OEM component specifically designed for GE dryers. It is responsible for circulating air during the drying cycle, directing airflow through lint and clothes to remove moisture. The plastic blades of the blower wheel push air through the dryer and out the vent when the motor is running.
Symptoms of a bad blower wheel include:
- Slow or inefficient drying times even on low moisture loads
- Strange noises from inside the dryer cabinet
- Excessive vibrations felt through the dryer door or cabinet
- Bent or cracked blower wheel blades
Causes can include normal wear and tear over time, accidents that damage the blades, or failures in the secure mounting of the blower wheel.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken plastic blower wheel Kyle S. • Leavenworth , KS • October 04, 2026
Had to break the plastic fan away from around the motor shaft, the metal bit inside the plastic wheel had broken off and seized to the motor shaft. Ended up using a Dremel to cut a slit in the metal bit and peel it off of the motor shaft. Wasn't a hard repair but the seized bit definitely added onto the time, recommend anti seize lubricant if you're doing a replacement
Read more
More
$23.59
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008383
Fix loud sawing noise or error code 4d21/4d22 in your oven. This tangential cooling fan motor restores proper airflow. Moderate difficulty repair.
Do-It-Yourself Stories from Customers like You
Jenn aire double wall oven turned off after a minute error code 4d21 William J. • Hilton Head Island , SC • September 01, 2016
I replaced the cooling fans (the upper one was totally burned out). Oven (13 years old) works like new now.
Read more
More
$159.77
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10580220
Replacement wheel for dishwasher upper rack assembly. Supports and guides smooth rack movement. Needed when original wheel is cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Needed new wheels. Casey G. • Ansonia , CT • December 13, 2020
Installed new wheels.
Read more
More
$34.75
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE49X28031
Idler bracket and bearing assembly mounts to the dryer base, supporting and tensioning the drum belt. Replace if bracket is cracked or bearing is worn.
Do-It-Yourself Stories from Customers like You
None Dennis B. • Carmel Hamlet , NY • January 15, 2018
Took dryer apart. Replaced roller, 45 minutes, done.
Read more
More
$56.77
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH01X10608
Secures the drive pulley to the motor shaft in your laundry center washer. Replace if stripped, missing, or loose to restore a solid pulley connection.
Do-It-Yourself Stories from Customers like You
Washer fills but cycle pauses (cycle light flashes) as soon as agitation begins field service mode indicates a "blocked motor" error code Spencer K. • Chicago , IL • May 01, 2020
If the motor spins initially and then the cycle pauses (cycle light flashes), the motor DOES NOT need to be replaced. The issue is a problem with the speed sensor (you will get a "blocked motor" error code if you put the washer into service mode. Instructions for entering service mode should be taped somewhere under the control access panel, or you can find it online).
MAKE SURE THE WASHER IS UNPLUGGED BEFORE ATTEMPTING ANY OF THE FOLLOWING
The quick check-- If you open the front cover and see...
Read more
More
$75.22
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268703
Replacement axle for dishwasher upper rack height adjustment mechanism. Needed when the axle is broken, cracked, or missing from the rack roller assembly.
Do-It-Yourself Stories from Customers like You
Screw on one of the roller on upper tray broke Tim J. • Bend , OR • December 28, 2014
Replaced complete roller- screw,wheel and axel. Easy job
Just recently I had to replace upper spray arm. I ordered assembly from you and was completely satisfied with your service and price, that was over 1/2 of what local appliance repair dealer wanted. Very satified with how to do video on this project
Read more
More
$6.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10911403
Microwave turntable won't rotate or stops under load? This turntable motor restores even heating. Accessed from the bottom with basic tools.
Do-It-Yourself Stories from Customers like You
Microwave oven turntable motor stopped Russell H. • Suwanee , GA • January 26, 2020
Turn off power, gain access to the bottom of microwave, remove the metal panel by cutting tabs with side cutters, replace motor, use sheet metal screws to reattach cover (not supplied), finish reassembly. This repair is simple once once you have accessed the bottom of the microwave oven. I had the pleasure of having a Kitchen Aid Oven/Microwave combo wall unit, KEMS308SSS05. This means the microwave assembly must be removed from the combo unit assembly to gain access to the turntable motor...
Read more
More
$79.60
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP243368
Replace a worn, bent, or broken agitator shaft in your stand mixer. This shaft connects attachments to the planetary mechanism for proper operation.
Do-It-Yourself Stories from Customers like You
Motor would not run at any speed setting Joseph H. • St. Cloud , MN • December 19, 2021
Replaced Speed control plate. The contact points were pitted and burnt and not making good contact.
I also replaced the agitator shaft, as it was slightly worn, and thought I would get the spring along with it as it was shown in the part image, but did not come with it.
The mixer runs like new again!
Read more
More
$23.61
IN STOCK
Most orders arrive by Wednesday, November 25