Bath Fan Light Socket Parts
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$84.95
- Compare At:
-
$101.09
- You Save:
-
$16.14
Genuine Broan part
By: Broan
Part Number: SR111630
Range hood light won't stay on or flickering? Loose or melted light socket is often the cause. This socket assembly plugs into the main harness. 5-minute fix.
Do-It-Yourself Stories from Customers like You
Mom's broan allure range hood had a light that would not stay on when she wiggled the bulb was the whole socket was loose certified(?) repairman had come out twice but failed to fix it Jeryl B. • Center Point , IA • May 09, 2014
I pulled out the wiring harness for the bulb and really inspected the sockets. (The wire connections on one of the sockets were really loose and the inside of that socket was a little melted.) I replaced the light wiring harness and sockets.
It was a really simple fix.
I turned off the power to the range hood at the breaker box first. I removed the filters and the light bulbs. I only needed a medium sized crosspoint screwdriver to remove 5 screws that hold up the light housing. The...
Read more
More
$50.26
- Compare At:
-
$60.31
- You Save:
-
$10.05
Genuine Whirlpool part
By: Whirlpool
Part Number: W11224591
Refrigerator not cooling evenly or making unusual noises? This evaporator fan motor circulates cold air throughout your fridge. Moderate DIY repair.
More
$101.95
- Compare At:
-
$121.32
- You Save:
-
$19.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10349492
Fix odd rattling noises or no airflow from vents with a new dryer blower wheel. Common issue: lint buildup or wheel separation. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
The blower wheel in the dryer separated from the nut Stefan K. • Youngsville , NC • February 25, 2016
It was a relatively easy fix - if you know how to take the dryer apart. If you don't, there are plenty of YouTube videos explaining how. Make sure you find your model.
Since the wheel had separated from the nut, it wasn't quite as easy and holding the shaft and loosening the wheel. I had to remove (destroy) the wheel first. Then I was left with the nut on the shaft. The nut was seated on the shaft a lot tighter than I expected and took some force to get off. Once it was off, putting the new...
Read more
More
$71.95
- Compare At:
-
$86.34
- You Save:
-
$14.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396715
Refrigerator making strange noises or temperature uneven? This evaporator fan motor circulates cold air. Moderately difficult repair—video available.
Do-It-Yourself Stories from Customers like You
Uneven temperature in freezer. Dan T. • Parkersburg , WV • January 24, 2021
Replaced evaporator fan in back wall of freezer.
Read more
More
$90.29
- Compare At:
-
$107.45
- You Save:
-
$17.16
Genuine Ge part
By: Ge
Part Number: WR60X10257
Fix loud whirring, rattling noise or no cooling in your fridge. This evaporator fan motor circulates cold air. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Noisy fan Robert M. W. • Palmetto , FL • October 29, 2016
I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble.
Replaced the motor and fan and now it runs like a new unit.
Read more
More
$142.95
- Compare At:
-
$168.68
- You Save:
-
$25.73
Genuine Whirlpool part
By: Whirlpool
Part Number: 279320
The Terminal Block Kit is an OEM part for Whirlpool dryers. This kit includes the terminal block, wires, wire connectors, screws, brackets and instructions.
Common causes of a bad terminal block include overheating due to loose connections, corrosion from moisture exposure, and physical damage from handling or installation errors.
Symptoms of a bad terminal block kit include:
- Dryer not starting or losing power during operation
- Burning smell or visible burn marks near the terminal block
- Loose or frayed wires connected to the terminal block
- Intermittent electrical issues or malfunctioning controls
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Could not remove old power cord from back of dryer (screw heads stripped due to soft metal) Michael A. • Lewiston , ME • August 26, 2017
I had to remove my dryer so I could install a new floor. The dryer would not fit through the doorway with the power cord attached. Since the power cord was fastened to the back using 3 phillip headed screws, I gently backed them out with a phillip headed screwdriver. However, two of the 3 screws gave me extreme trouble. The head of the screws were made of such a weak metal, that the screw head began stripping. I have a phillip screw kit with different sized heads, so I picked a head that...
Read more
More
$44.24
- Compare At:
-
$52.65
- You Save:
-
$8.41
Genuine Ge part
By: Ge
Part Number: WB27T10668
Indicator light illuminates when cooktop surface is hot. Replace if light stays on constantly, fails to light, or housing is cracked. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Light indicating hot surface not working on ge smoothtop Richard A. • Boca Raton , FL • October 22, 2016
Easy fix. Pulled out the range and disconnected power cord. Unscrewed two screws in front of unit. Tilted smoothtop open toward rear of stove. Propped a piece of wood to keep it open.
Removed burned out Indicator bulb and its plastic housing. Disconnected two wires attached.
Installed new bulb and its housing attaching the two wires...housing clicked into hole where old one was removed. Closed top and re-attached two screws... Now works fine.
Read more
More
$11.39
- Compare At:
-
$11.94
- You Save:
-
$0.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W10838084
This replacement wire harness routes electrical power and control signals between components in your appliance. Replacing a damaged harness helps restore reliable operation and prevents intermittent electrical issues caused by broken or overheated wiring. What it does:
- Distributes power and signals between the control, motors, sensors, and other components
- Helps resolve issues like components not running, intermittent operation, or features losing power
- Addresses visible damage such as burnt, melted, pinched, or frayed wires/connectors
- Helps when diagnostics indicate open/shorted circuits in the wiring
What's included:
- One wire harness assembly
Install notes:
- Disconnect power to the appliance before servicing; shut off water or gas if applicable
- Photograph/label each connection and follow the original routing to avoid pinch points or heat sources
- Release locking tabs and pull on connector housings—do not pull on the wires
- After installation, ensure all connectors are fully seated and wires are secured away from moving or hot parts
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315559
This coupling sleeve connects and protects the drive shaft that powers your appliance's auger or rotating mechanism. It provides a flexible connection that absorbs vibration while transferring rotational power between shaft sections. Replace this coupling if you hear grinding noises, experience reduced performance, or if the auger stops turning completely.
Do-It-Yourself Stories from Customers like You
Ice maker auger drive shaft was slipping Timothy O. • Longwood , FL • January 11, 2016
Added a new shaft as the old shaft had worn down...........works perfect now. Thank you
Easy fix ....no more than 10 mins.
Read more
More
$47.41
- Compare At:
-
$56.89
- You Save:
-
$9.48
Genuine Lg part
By: Lg
Part Number: 5040JA2004A
The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.
Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.
Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:
- Unusual noises or vibrations from the back of the refrigerator.
- The evaporator motor shifting out of place, which can affect cooling efficiency.
- Increased wear on the evaporator motor due to lack of proper cushioning and support.
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Evap fan on refriderator was making horrible growlin noise Thomas K. • Ball Ground , GA • June 27, 2015
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304461116
Replacement light bulb for microwaves. Illuminates the interior and cooktop area. Replace when burned out or dim. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Needed new light bulbs under microwave over stove but bulb had broken off leaving metal screw in part of bulb stuck in socket Denise B. • River Forest , IL • May 20, 2016
Unplugged microwave, sprayed lightly with WD-40, grabbed rim with needle nose pliers and was then able to remove metal screw-in portion. Wiped out socket with rag, replaced bulb.
Read more
More
$41.76
- Compare At:
-
$50.11
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12825803
Refrigerator making loud noise or not cooling? A cracked or broken condenser fan blade disrupts airflow. Easy 10-minute DIY fix with our video guide.
Do-It-Yourself Stories from Customers like You
Noise irritating wife, wife irritating me. Scott H. • Surprise , AZ • March 14, 2020
The noise seemed to be caused by a vibration. The condenser fan motor seemed to have a vibration. I didn't need the fan blade as it came off in good condition.
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Ge part
By: Ge
Part Number: WR60X10318
Fix uneven cooling or warm spots in your fridge with this evaporator fan motor. Restores airflow across coils when the fan runs weak, noisy, or stops.
Do-It-Yourself Stories from Customers like You
Poor temperature control and no water to icemaker or front dispenser Robert B. • San Jose , CA • February 06, 2015
Lack of water was due to frozen water reservoir on refrigerator side. Frozen water was due to temperature issues - cold on bottom of both freeder and refrigerator side, warmer at top. This was caused by evaporator fan failure. The fan had come loose from its housing and eventually vibrated itself to death - wire leads had vibrated open. Since the fan/wire harness are integrated, I needed to replace the unit. Evaporator fan blade took a beating too, so I replaced that as well. Online repair...
Read more
More
$132.72
- Compare At:
-
$159.26
- You Save:
-
$26.54
Genuine Ge part
By: Ge
Part Number: WR60X42350
Fix a loud or squealing refrigerator with a new condenser fan blade. Circulates air over condenser coils to maintain proper cooling temperature.
Do-It-Yourself Stories from Customers like You
Fan blade William B. • Franklin , OH • August 17, 2019
Put a new one on
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Frigidaire part
By: Frigidaire
Part Number: 318228310
Protects and diffuses your range's indicator light that signals when burners are on or surfaces are hot. Replace if cracked or missing. Easy install.
Do-It-Yourself Stories from Customers like You
The little red lens that lets you know the stove or oven is on or hot has broken off! Wayne D. • Poplarville , MS • March 16, 2014
I ordered 7 new lens caps to replace them all. Took ten minutes to fix.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36