Gear Parts

This dishrack roller and stud assembly lets the rack glide smoothly in and out of the dishwasher. Replacing a worn or broken wheel restores proper rack movement and helps prevent binding, noise, and derailment. What it does:

• Attaches to the rack wire with an integrated stud/clip to provide a rolling wheel on the rack rail
• Restores smooth, even rack travel and alignment
• Replaces cracked, missing, or seized rack wheels
• Common symptoms: rack is hard to slide, wobbles or comes off track, or the wheel is visibly damaged

• One roller-and-stud assembly

• Disconnect power before servicing; work with dry hands
• Pull the rack fully out and lift it off the rails
• Release the old stud from the rack wire, position the new assembly, and snap/lock it in place with the wheel oriented to the rail
• Reinstall the rack and verify smooth movement

This pivot is the replacement pivot piece that supports and guides a refrigerator door or sliding drawer, restoring proper alignment for smooth opening and closing. Fits original equipment pivot points. What it does:

• Supports the weight of a door or drawer and keeps it aligned on its track
• Guides smooth opening and closing and prevents binding or sagging
• Restores proper contact and seal when a worn pivot causes misalignment
• Helps reduce noise from loose or worn pivot points

• Disconnect power to the appliance before beginning any repair
• Access may require removing interior panels, trim, or the drawer/door per model instructions
• Handle carefully to avoid scratching sealed surfaces; replace worn fasteners if needed
• If alignment issues persist after replacement, check related hinges, tracks, and mounting hardware

This roller kit replaces worn or broken drawer rollers so a refrigerator or freezer drawer opens and closes smoothly. It restores proper drawer alignment and reduces sticking or dragging for easier access to stored food. What it does:

• Replaces damaged or worn rollers that cause drawers to stick, bind, or sit unevenly
• Guides the drawer along its track for smooth, consistent movement
• Reduces noise from grinding or scraping during drawer operation
• Helps maintain proper drawer alignment to prevent jams and protect the glide track

• One roller kit assembly

• Disconnect power to the appliance before beginning any repair to avoid injury
• Remove the drawer and inspect the slide/track for damage or debris before installing the new roller
• Installation typically requires basic hand tools and removing the drawer from its track; follow the OEM diagram for correct placement
• If the track or other components are damaged, replace them as recommended by the OEM

The Microwave Turntable Holder Rack is the ideal replacement part to keep your Samsung microwave functioning perfectly. Designed specifically for Samsung microwave models, this holder rack ensures a secure fit and seamless operation. As a genuine OEM part, it guarantees the highest quality and compatibility, matching the original specifications of your appliance. The holder rack effectively supports the turntable, allowing it to rotate smoothly and evenly, which promotes consistent heating and cooking results. Its durable construction ensures long-lasting performance, reducing the need for frequent replacements and providing reliable support for your microwave turntable. Installing the Microwave Turntable Holder Rack is straightforward, enabling you to restore your microwaveGÇÖs functionality quickly and easily. Whether your current holder rack is damaged, missing, or simply worn out, this genuine OEM part offers a dependable solution to maintain the efficiency and convenience of your Samsung microwave. Enhance your cooking experience by ensuring your microwave operates as intended with this essential holder rack.

This is a replacement dishwasher rack assembly with factory-installed wheels. It restores smooth sliding and safe loading when the original rack is bent, rusted, or missing rollers—helping the rack glide properly and keep items positioned during the wash.

• Holds and organizes dishes, glasses, and cookware during cycles
• Integrated wheels ride on the tracks for easy loading and unloading
• Replace if tines are rusted/broken, wheels are cracked or missing, or the rack derails
• Helps prevent items from tipping and maintains consistent spray coverage

• Disconnect power to the dishwasher before servicing
• Open the door, extend the rack, release any rail end-stops, and remove the old rack
• Transfer any removable accessories from the old rack to the new one, if needed
• Slide the new rack onto the rails and reinstall end-stops; verify smooth operation

The Rack Roller is an OEM component compatible with GE dishwashers. Located on the rack guide rails inside the washer tub, it facilitates smooth gliding of rack shelving in and out for easy loading and unloading. 

Causes of failure can include cracked/warped rollers from years of continual movement, accumulation of debris preventing free motion, or detachment of roller heads compromising installation.

Symptoms include:

• Difficulty fully extending or retracting racks  
• Off-tracking of shelving from left to right rails
• Scratches or damage to dishware from improper rack functioning 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

The Gear Pinion is an OEM component specifically designed for GE French door refrigerators. This part is responsible for the smooth operation of door hinges and closing mechanisms. 

The gear pinion works together with other inner door components to evenly distribute strength across the refrigerator’s motion system. This ensures doors move fluidly and stay securely sealed when closed. 

Causes of a bad gear pinion can include wear from repetitive use over many years, stress from overloading the doors, or misalignment of connecting mechanisms.

Symptoms of a bad gear pinion include: 

• Doors not closing or latching properly
• Binding or sticking movement  
• Noise or vibration when opening/closing
• Increased effort required to operate doors

Note: Right-hand side

Replace this precision gear with a genuine GE OEM part to restore dependable door functionality. This product is also compatible with Hotpoint, RCA, and Kenmore refrigerator models.