Power Nut Installation Parts
Genuine Ge part
By: Ge
Part Number: WB01X34910
The Door Removal Tool is an OEM replacement part for GE microwave ovens. It is a specialized tool designed to assist in the safe and proper removal of the microwave door. This tool is essential for servicing, repairing, or replacing components within the microwave cavity, ensuring that the door can be securely detached and reattached without causing any damage.
Symptoms of needing the Door Removal Tool include:
- Requirement to access the interior components of the microwave for repairs or maintenance
- Difficulty in removing the microwave door using conventional methods
- Potential risk of damaging the door or other components without the proper tool
Causes for needing the Door Removal Tool can vary, but it is typically required when performing tasks such as replacing the magnetron, waveguide cover, or other internal parts that necessitate door removal for access.
This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore microwave models.
Do-It-Yourself Stories from Customers like You
The broken upper door for GE microwave/oven combo. Charles S. • Triangle , VA • October 03, 2021
The repair was fairly straightforward. I used the enclosed door removal tools to remove the old door. Then I slid the new door into place. The whole process probably took 1 minute.
Read more
More
$12.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP355214
This screw-and-washer fastener is a factory-size 8-18 x 5/16 hardware piece used to secure appliance panels and components. Replace stripped, rusty, or missing hardware to restore a tight, rattle-free fit and proper alignment. What it does:
- Fastens sheet-metal panels, brackets, and small components in the appliance cabinet
- Replaces lost, stripped, or corroded screws to maintain secure mounting
- Helps reduce vibration, buzzing, or rattling from loose parts
- Useful when the original hardware is missing or no longer holds securely
What's included:
- Includes 1 screw-and-washer fastener (8-18 x 5/16)
Install notes:
- Disconnect power; shut off gas and water supplies if applicable
- Match the fastener to the original location; sizes can vary by application
- Start threads by hand to avoid cross-threading; use an appropriately sized driver
- Tighten snugly without overtightening to prevent stripping sheet metal
Do-It-Yourself Stories from Customers like You
Burners were leaking gas igniters didn't work Christine B. • Meredith , NH • February 13, 2016
I removed the burners, which were rusted and needed some tapping.They were pretty stubborn to remove from the insert. I removed the spark igniters, which were rusted where they screwed into the burner and then removed the venturi tubes.. Once this was done, I installed the new igniters to the underside of the new burner. I then installed the burners, which only took simple placement and a quarter turn to lock them in. I then hooked up the igniter wire to the new spark igniters. The repair...
Read more
More
$7.56
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853313
Genuine Whirlpool OEM moisture sensor bar for electric and gas dryers. Works with a second sensor strip to detect humity/moisture as clothes tumble past. The control board reads the signal to determine remaining moisture and ends the cycle automatically at the target dryness level — preventing over-drying and reducing energy use.
Common Failures
- Cycle ends too soon — clothes still damp
- Dryer won't shut off — runs continuously
- Error codes F:22 or F:26
- Inconsistent results — unpredictable dryness
- Bent, cracked, or detached bar
- Corrosion from dryer sheet chemicals
Do-It-Yourself Stories from Customers like You
Moisture sensor feature did not work, timed dry worked fine Bruce M. • The Villages , FL • January 18, 2020
First, I cleaned the existing sensor. There was no change. I then replaced the sensor and again no change. I did note when replacing the sensor that the wiring harness was more than a simple wire. It has some electronic components associated with it. So, on a wild chance, I ordered a replacement harness. After I install the part, I will amend this article.
Read more
More
$50.57
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572767
Dryer won't heat? A failed thermal limiter opens the heating circuit when temperatures exceed safe limits. Simple DIY fix restores heat in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Dryer no heat Everett E. • Portage , MI • November 01, 2015
The thermal cutoff went bad because of lint being trapped in dryer vent and blocked air-flow from dryer. Removed accumilation of lint and installed new thermal -cutoff and thermostat and dryer now works great.
Read more
More
$57.39
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE2M302
Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.
Do-It-Yourself Stories from Customers like You
Dryer door did not close Wendy G. • Yonkers , NY • November 09, 2019
It was easy, I got the model number of my dryer, then I went on google and found your website. You got a perfect diagram of the door of my dryer. After I saw the video relate it to my problem, I purchased the parts that I need it to fix it, I didn’t need my husband to do it for me. I gave him a surprise after he got home for work. It was all done.
Thanks
Read more
More
$12.35
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE4M300
Fix a dryer that won't heat with this outlet backup thermostat. Mounts on exhaust duct for over-temperature protection. DIY repair in under 1 hour.
Do-It-Yourself Stories from Customers like You
Gas dryer was not heating Charles M. • Huron , OH • September 01, 2016
Checked vent first to see if there was a blockage.
Removed top, front and drum of dryer.
Replaced all sensors including flame detection and gas valve coils.
Re-assembled and tested.
Dryer was now heating
Read more
More
$60.33
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 241685001
Fastens the auger shaft in your refrigerator's ice maker assembly. Replace if cracked, broken, or missing to secure the auger and prevent rubbing.
Do-It-Yourself Stories from Customers like You
Refrigerator would dispense ice cubes however would no longer provide crushed ice Thomas R. • Washington , MO • October 16, 2017
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke.
Read more
More
$16.52
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP503979
Fix a dryer that overheats, won't dry completely, or stops mid-cycle. This cycling thermostat regulates heat to prevent damage. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Bad thermal fuse Orville L. • Winneconne , WI • October 02, 2015
I replaced the main parts for the dryer cycle system
Read more
More
$79.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 134711300
Fix dryer heating issues with this thermistor temperature sensor. Solves intermittent heat, cycle errors, and poor drying. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
No heat burner running 30 seconds at a time then turning off John G. • Oxford , MI • September 02, 2019
Replaced all sensors, limiters, thermistors, thermostat. Works great now.
Read more
More
$56.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$9.45
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 4011FA4353E
Replacement bolt that secures the spider assembly to the inner wash basket. Needed when hardware is missing, stripped, or corroded during repairs.
Do-It-Yourself Stories from Customers like You
Machine was making a rumbling noise Stuart K. • Port Huron , MI • September 29, 2017
Can't buy LG parts in Canada without getting an LG Tech to install. $1000 repair was too steep for me so went on websites and bought from Appliance Parts. Watch the video on Appliance Parts. Note - Joyce from Appliance Parts really helped in identifying the bolts that I needed. Read on and you will see why. Stripped down machine and identified the spider had failed along its three arms. Bearings were still in good condition. Managed to get three bolts off spider but remaining three had same...
Read more
More
$19.76
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE4X757
Dryer won't heat or overheats? A faulty safety thermostat fails to regulate temperature. Test for continuity with a multimeter; moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Faulty thermal fuse Phillip D. • Hagerstown , MD • August 23, 2015
Removed lid. Removed switch panel. Suspected open circuit in thermal fuse. Tested it with a multimeter first to confirm it had an open circuit. This part is obsolete. Contacted manufacturer and found part supercedes to a different part number Ordered part. (This website is very efficient. The part arrived with the 1.7 day promise time.) new fuse bracket is slightly larger due to supercession. Marked bolt hole locations and drilled new. Installed fuse. Re-assembled dryer in reverse order....
Read more
More
$67.60
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304453707
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
- Fastens metal or plastic parts to the cabinet/frame
- Helps maintain alignment and reduce vibration or rattling
- Direct replacement for lost, damaged, or rusted hardware
- Keeps covers and brackets safely in place
What's included: 1 screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off gas supply
- Match one-for-one with the original screw; verify length/type before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver bit to prevent stripping the screw head
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$23.61
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB02T10017
This is a genuine OEM replacement nut that is used on convection oven fans. This nut holds the fan onto the spindle. If the nut becomes lost during repairs to the fan, it will need to be replaced before the fan will work. This nut locks the fan to the spindle to turn and move the air around inside the oven. The fan helps the food to cook more evenly and reduces areas in the oven that are not cool enough or hot enough. If the fan is not working, the convection oven will not cook correctly.Convection ovens are different from regular ovens, and the fan is part of the reason. Convection ovens use the fan and an exhaust system to move the heat around inside the oven to cook food more evenly and faster. Many convection ovens have a setting that allows the oven to be used as a regular oven. If the nut is missing and the fan is inoperable, the oven can be used for regular cooking if it has this feature. Otherwise, the convection oven should not be used until the nut is replaced.This nut is a silver metal replacement part that is sold individually. It is designed for use in convection ovens made by GE and Kenmore.
Do-It-Yourself Stories from Customers like You
Convection fan screaming like the undead are coming Diego G. • Eden Prairie , MN • February 04, 2017
I took the cover off and the fan had separated from the bushing.
Ordered a new fan and nut and it took all of 5 minutes to replace.
Probably saved $159.99 service call repair and that is with a coupon.
Any one can do this repair, just make sure the oven is cold as you will come in contact with metal parts.
Read more
More
$8.95
IN STOCK
Most orders arrive by Wednesday, November 25