Need Help?
Call
Fix a dryer that overheats or blows thermal fuses with a new high-limit thermostat. This safety part opens the heater circuit at high temps. 30-min repair.
Unpluged dryer unscrewed vent hose used nut driver to remove back pannal then took flat head screw driver to bend tab on heating elment caseing and pry carefully the electrical conector away from elment conection to remove thermostat then i placed the new thermostat on tap and pushed elctrical conetion back onto heater element conection till everything was thight and didnt wiggle dryer works well now Read more
Frost buildup or no defrosting? This defrost thermostat monitors evaporator coil temperature to trigger defrost cycles. DIY-friendly repair, 30-45 minutes.
Replaced thermostat and heater. Read more
Fix frost buildup and warm temps with a new defrost thermostat. Monitors evaporator coil temperature to prevent ice accumulation. DIY-friendly repair.
Replaced defrost thermostat, replaced frig thermistor. Good experience. Excellent support and assistance for Maytag. Read more
Genuine Whirlpool OEM moisture sensor bar for electric and gas dryers. Works with a second sensor strip to detect humity/moisture as clothes tumble past. The control board reads the signal to determine remaining moisture and ends the cycle automatically at the target dryness level — preventing over-drying and reducing energy use.
Common Failures
Purchased a new sensor from AppliancePartsPros.com. Installed new part - Problem fixed. Read more
Dryer not heating or overheating? This thermostat regulates temperature during the drying cycle. Common DIY repair that restores proper heat control.
Did it myself. Read more
Fix a dryer that won't heat with this outlet backup thermostat. Mounts on exhaust duct for over-temperature protection. DIY repair in under 1 hour.
Checked vent first to see if there was a blockage. Removed top, front and drum of dryer. Replaced all sensors including flame detection and gas valve coils. Re-assembled and tested. Dryer was now heating Read more
Fix ice buildup and cooling issues with a new defrost thermostat. This bi-metal switch monitors evaporator temperature to prevent frost accumulation.
Replaced broken fan blade Read more
Fix a dryer that overheats, won't dry completely, or stops mid-cycle. This cycling thermostat regulates heat to prevent damage. DIY-friendly repair.
I replaced the main parts for the dryer cycle system Read more
Dryer won't heat? A failed thermal limiter opens the heating circuit when temperatures exceed safe limits. Simple DIY fix restores heat in 15-30 minutes.
The thermal cutoff went bad because of lint being trapped in dryer vent and blocked air-flow from dryer. Removed accumilation of lint and installed new thermal -cutoff and thermostat and dryer now works great. Read more
This heater harness installs in the refrigerator's fresh food section. It provides defrost heat and the correct wiring connections to clear frost from the fresh food evaporator, restoring airflow so the compartment cools evenly and reliably.
I replaced the evaporator fan after using a steam gun to defrost the evaporator and ensuring the drain wasn't clogged. After assembling, I noticed the refrigerator wasn't performing a defrost cycle. After testing the heater, I determined the main board relay was malfunctioning and not supplying the voltage to the heater. After correcting this, the ice maker wasn't making ice still and after troubleshooting it, I determined the dc motor was stuck. I replaced the ice maker and the... Read more
Fix dryer heating issues with this thermistor temperature sensor. Solves intermittent heat, cycle errors, and poor drying. Easy DIY repair.
Replaced all sensors, limiters, thermistors, thermostat. Works great now. Read more
Dryer won't heat or overheats? A faulty safety thermostat fails to regulate temperature. Test for continuity with a multimeter; moderate DIY repair.
Removed lid. Removed switch panel. Suspected open circuit in thermal fuse. Tested it with a multimeter first to confirm it had an open circuit. This part is obsolete. Contacted manufacturer and found part supercedes to a different part number Ordered part. (This website is very efficient. The part arrived with the 1.7 day promise time.) new fuse bracket is slightly larger due to supercession. Marked bolt hole locations and drilled new. Installed fuse. Re-assembled dryer in reverse order.... Read more
This temperature sensor monitors internal refrigerator temperatures and relays them to the control, helping the unit maintain consistent cooling. Replacing a failed sensor restores accurate temperature regulation and more reliable operation. What it does:
I've cleaned the drain tube numerous times. Always freezes and plugs. Added a defrost tab down into drain tube, missing from factory. This time defrost heater bad. Replaced heater, bi-metal switch and temp sensor. Great service and next day receipt of parts. Thanks ! Read more
Fix frost buildup in your freezer with this defrost heater harness and thermostat. Restores proper defrost cycling to prevent ice accumulation.
This is a thermistor-style temperature sensor that monitors the internal temperature inside the refrigerator compartment and sends readings to the main control board. The control board uses this data to regulate the compressor and cooling cycles to maintain proper temperatures. Replace this sensor if the refrigerator is running too warm, too cold, not cycling correctly, or displaying temperature-related error codes.
Using service manual, obtained from this site, I verified with meter that this was the error. I ordered the defrost sensor. The part arrived the next day. Most of the time to repair was unloading, cleaning, and reloading the refrigerator. Read more
This CCMR 30-amp, 120-volt fuse protects the appliance's electrical circuit by opening when current exceeds safe limits. Replace a blown fuse to restore power to the affected circuit and help prevent damage to internal components.
First I check the breaker for the dryer then I check the power cord and the ohms to the power cord when all this things were in working order I then check the ohms to the fuse to the control panel. The fuse had no ohms so I got a pair on needle nose pliers pulled out the fuse and replace it worked just find after that Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.