Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lid Lock Bezel Parts

Best Seller
Door Catch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1003

The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.

Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.

Symptoms of a bad door catch include:

  • The dryer door not staying closed
  • Difficulty latching the door shut
  • The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Door won't close
  • Shuts off too soon
  • Doesn't shut off
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Door clip to my dryer broke   Richard D. • North Dinwiddie , VA • March 15, 2014

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more

More
$25.76

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Range Burner Control Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: W11030413

Control knob for gas range burner heat settings. Mounts on the cooktop control panel. Replace if cracked, broken, paint is peeling, or worn from use.

Do-It-Yourself Stories from Customers like You Knobs were developing sharp cutting edges made with foil trim which looked good but edges peeled off sharp enough to cut fingers when using   James S. • East Aurora , NY • May 23, 2026

Replaced knobs. I wonder how long before condition repeats?????? Read more

More
$54.25

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Lid Strike (White)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11513250

The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure. 

Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.

Symptoms of a defective lid strike include:

  • The washer lid not latching properly or staying securely closed  
  • Water leaks around the lid seam
  • Error codes related to the lid not locking
  • Difficulty opening the lid fully after cycles  

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers. 

Do-It-Yourself Stories from Customers like You Maytag locking mechanism broke so machine would not function   Sandra M P. • Rancho Palos Verdes , CA • August 16, 2026

We ordered a new locking mechanism, latch and cover, and followed the directions that we found on UTube. Worked perfectly. Read more

More
$10.71

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Cooktop Control Knob
Genuine Ge part
By: Ge
Part Number: WB03X29315

Control knob for cooktop burner temperature adjustment. Installs on control shaft. Replace if cracked, broken, melted, or missing. Hard plastic construction.

Do-It-Yourself Stories from Customers like You Scratched burner knob   Walter L. • Marietta , GA • October 28, 2019

Bought new from you Read more

More
$24.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Lid Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684

Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.

This part fixes the following symptoms
  • Will not agitate
  • Will not drain
  • Won't start
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The spin cycle would not initiate pump to drain tub   Douglas B. • Skull Valley , AZ • January 21, 2017

Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new. Read more

More
$9.63

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Refrigerator French Door Cap
Genuine Samsung part
By: Samsung
Part Number: DA67-01650A

The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your appliance. Designed to protect the casing around the French doors, it helps prevent wear and tear, keeping your refrigerator looking new for longer. The durable construction of the Refrigerator French Door Cap provides reliable coverage against scratches and impacts, enhancing the overall durability of your fridge. Installing this cap is straightforward, allowing you to quickly restore the original look of your Samsung refrigerator without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the quality and compatibility, ensuring your appliance operates smoothly. Whether you need to replace a cracked, missing, or damaged cap, the Refrigerator French Door Cap is the perfect solution to maintain the aesthetic and functional integrity of your Samsung refrigerator.

Do-It-Yourself Stories from Customers like You French door center flap spring ripped out flap no longer opened automatically when door closed   Jonathan R. • Mequon , WI • March 27, 2016

In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more

More
$9.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Gas Cooktop Control Knob
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304525746

Replacement control knob for gas cooktops. Installs on the control panel to adjust burner settings. Replace when cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Plastic knobs broke   Cindy O. • Cotati , CA • September 27, 2021

Got new metal knobs, so much better! Read more

More
$64.22

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Door Lock Switch
Genuine Samsung part
By: Samsung
Part Number: DC64-00519D

Washer won't start or shows door lock error? This door lock switch keeps the door secured during wash cycles. DIY repair in 15-20 minutes with video.

Do-It-Yourself Stories from Customers like You Part holding door shut broke.   Richard B. • Schwenksville , PA • April 04, 2014

First I took off the spring loaded wire ring holding down the seal to the door with needle nose pliers. Pulled back the seal. Removed the 3 screws holding the part on the front of the washing machine. Slid the piece out. Took the protector guard off the off piece and unplug the wires. Put the wires into new part. Put the protector on the new part. Slid the part back into place. Screwed it back in. Put the seal back on. Put the wire spring loaded ring back around the seal. Total time 15 minutes... Read more

More
$178.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Control Knob
Genuine Ge part
By: Ge
Part Number: WH01X10313

Replacement control knob for washing machines. Installs on the control panel to select cycle and temperature settings. Needed when cracked or broken.

Do-It-Yourself Stories from Customers like You Dryer was not heating on the timed dry side but heating on the other side of timer   Iris H. • Canal Fulton , OH • February 22, 2015

Replaced the timer Read more

More
$10.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dishwasher Detergent Dispenser Lid Pin
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3372028

Fix a detergent lid that won't stay closed or open properly with this dispenser lid pin. Simple repair with video guide—most DIYers complete in minutes.

Do-It-Yourself Stories from Customers like You Latch would not open consistently on detergent dispenser   James G. • Waxhaw , NC • January 12, 2015

Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle. Read more

More
$10.71

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Range Control Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415450

Control knob for range burner heat settings. Installs on the control panel. Replace if cracked, broken, worn from heat exposure, or missing.

Do-It-Yourself Stories from Customers like You One of the burners did not work   Marc D. • Boxborough , MA • November 25, 2015

I replaced the burner valve which did not turn and therefore did not allow gas to flow. Read more

More
$25.76

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Dryer Combo Selector Switch Knob
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844470

Replacement selector switch knob for washer dryer combo control panels. Installs on the control stem to select wash or dry cycles. Needed when cracked or broken.

Do-It-Yourself Stories from Customers like You Start switch knob broke off.   Jeff O. • Laurier , WA • March 07, 2018

I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$ easy peasy!! :-) Read more

More
$53.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Microwave Stirrer Fan Cover
Genuine Ge part
By: Ge
Part Number: WB06X10712

Replaces a cracked, melted, or burned microwave stirrer fan cover. Installs on top of the cavity to protect the stirrer mechanism from damage.

Do-It-Yourself Stories from Customers like You Had a hole burned in plastic cover   Matthew P. • Rockford , MI • February 01, 2015

Used a flat head screwdriver to pop off old cover. Put new one back on. Keep the little plastic screw as the new cover does not come with one. Read more

More
$26.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dishwasher Detergent And Rinse Aid Dispenser
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876529

Soap not dispensing or lid won't open during cycle? This dishwasher dispenser assembly releases detergent and rinse aid at the right time. Moderate DIY.

Do-It-Yourself Stories from Customers like You Dispenser spring was weak or broke   James S. • Clinton , MS • July 26, 2025

Replaced dispenser Read more

More
$104.34

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Flame Sensor
Genuine Ge part
By: Ge
Part Number: WE4X448

The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.

Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.

Symptoms of a bad flame sensor include:

  • The dryer not heating or taking longer to dry clothes
  • The dryer shutting off unexpectedly during a cycle
  • The igniter glowing but not igniting the gas
  • Error codes related to heating or ignition issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Dryer heating for only a short time then no heat at all   David N. • Fairfax , CA • December 08, 2018

GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes. Also, the old solenoids tested... Read more

More
$79.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Control Knob Assembly (Cycle Selector)
Genuine Ge part
By: Ge
Part Number: WH01X10314

Control knob assembly for washer timer/cycle selector. Restores secure grip when original is cracked, stripped, or broken. Attaches to timer shaft.

Do-It-Yourself Stories from Customers like You The timer washer knob would not turn the dial assembly.   Daniel H. • Deridder , LA • June 12, 2021

I replaced the Timer knob components. Removing the cover that contains the Timer was simpler than I anticipated. Just remove the screws on the top of the back of the machine. Hold the cover and lift up and push to the left (facing the front of the washer). Removed the Timer Knob Clip with small needle-nose pliers. Grasped the Timer and turned counterclockwise to remove and unplugged the wiring clip. The timer is seated to the cover and held securely in place with one screw. I seated the new... Read more

More
$18.44

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google