Igniter Bake Parts

The Ignitor Assembly is an OEM replacement part for Frigidaire dryers. It serves as the ignition source safely firing up burners to initiate drying cycles. 

Causes usually relate to the continual thermal shock experienced from heating and then rapidly cooling over extended use. As a foundational safeguard, ignitors require OEM replacement when arcing declines. 

Symptoms of a faulty ignitor can include:

• The dryer fails to start or stop heating intermittently   
• Cycles taking overly long to complete or feel uneven
• Excessive service calls relating to "no heat" troubles  
• Risk of uncombusted gas pooling in dryer if ignition falters

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Dual Radiant Heater for Range is a reliable component designed to restore the heating functionality of your range. Operating at AC240V with power ratings of 1900W, this heater is available in both 9-inch and 12-inch sizes to fit various range models. As a genuine OEM part, it ensures seamless compatibility and efficient performance with your Samsung range. The Dual Radiant Heater provides consistent heat distribution, enhancing your cooking experience by maintaining optimal temperatures during use. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements. Installing this heater is straightforward, allowing you to quickly get your range back to full functionality without the hassle. Whether you need to replace a damaged heater or enhance your applianceGÇÖs performance, the Dual Radiant Heater for Range offers the reliability you expect from a genuine OEM part. Trust this component to deliver the dependable heating needed for all your cooking needs, ensuring your range operates smoothly and efficiently.

This broil element provides the intense top heat your electric oven needs for broiling and finishing dishes. Replacing a failed element restores consistent top browning when the broiler no longer heats or heats unevenly.

• Heats from the top of the oven cavity during broil to sear and brown foods
• Replaces a burned-out, shorted, or physically damaged element
• Symptoms: broiler won't heat, intermittent heating, uneven top browning, or visible blistering/breaks

• Disconnect power at the breaker before servicing; allow the oven to cool completely
• Remove oven racks; support the element while removing mounting screws and gently pull it forward to access terminals
• Transfer wires one at a time to the new element; ensure tight connections and that terminals do not touch metal surfaces; restore power and test broil

The Surface Element is an OEM replacement part for Whirlpool ranges. It is responsible for generating heat on the cooktop, allowing for efficient and even cooking. This component is designed to provide adjustable heat levels to accommodate various cooking needs, from simmering to boiling.

Symptoms of a bad Surface Element include:

• Inconsistent heating or failure to heat up
• Visible damage or wear, such as burns or warping
• Electrical issues, like sparking or short-circuiting

Causes for a malfunctioning Surface Element can be attributed to electrical failures, prolonged use at high temperatures, or physical damage due to spills and overflows.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bake Element is an OEM part for GE ranges. This part provides the necessary heat for baking and roasting inside the oven cavity. The bake element is located at the bottom of the oven and generates heat when electrical current passes through it.

Causes of a bad bake element can include general wear and tear from frequent use, damage due to accidental impacts or spills, and electrical issues such as short circuits or power surges.

Symptoms of a bad bake element include:

• The oven not heating up properly or at all
• Uneven baking or roasting results
• Visible damage such as burns, blisters, or breaks in the element
• The oven tripping circuit breakers or fuses

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Igniter Assembly is an OEM part for Whirlpool dryers. This part ignites the gas burner to produce heat for drying clothes. It plays a crucial role in the dryer's heating process, ensuring that the gas is ignited safely and efficiently.

Causes of a bad igniter assembly can include general wear and tear, electrical surges, or damage from repeated heating and cooling cycles. 

Symptoms of a bad igniter assembly include:

• Dryer not heating
• Clothes taking longer than usual to dry
• No glow from the igniter
• Intermittent heating during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This bake element is the primary heat source for the bake cycle in your range or wall oven. Replacing a failed element helps restore proper preheating and more even results when using the bake setting.

• Provides direct heat during the bake cycle
• Works with the control/thermostat to reach and maintain set temperature
• Common failure symptoms: no heat in bake, very long preheat, won't reach temperature, uneven baking
• Visual clues: blistering, cracking, breaks, or burnt spots on the element sheath

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the element from the oven cavity; remove mounting screws/bracket
• Pull the element forward carefully and move wires one at a time to the new element; do not let wires slip back into the insulation
• Ensure terminals are fully seated and the mounting plate is secure before restoring power

The Bake Element is an OEM part for Whirlpool ranges. This heating element is responsible for providing the necessary heat for baking and roasting by distributing heat evenly throughout the oven cavity, ensuring consistent cooking results.

Over time, bake elements can wear out or fail due to regular use, exposure to high temperatures, or accidental damage during cleaning. 

Symptoms of a bad bake element include:

• Oven not heating to the set temperature
• Uneven cooking or baking results
• Visible signs of damage such as burns, blisters, or breaks in the element
• The element not glowing red when in use

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This heating element is responsible for providing heat to a specific area on the cooktop, typically used for smaller pots and pans. It ensures even and efficient heating, allowing for precise cooking control.

Causes of a bad surface element can include regular wear and tear, overheating, or electrical malfunctions. A malfunctioning surface element can result in uneven heating, longer cooking times, or no heat at all.

Symptoms of a bad small surface element include:

• The element not heating up
• Uneven or inconsistent heating
• Sparks or electrical arcing when the element is turned on
• Visible damage or discoloration on the element

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Single Radiant Heating Element for Range is essential for maintaining consistent and efficient heat in your Samsung range. This genuine OEM part is specifically engineered to deliver reliable performance, ensuring your cooking surfaces reach and maintain the desired temperatures effectively. Built with durability in mind, the heater radiant-single provides long-lasting service, reducing the need for frequent replacements and saving you time and money. Compatible with a wide range of Samsung ranges, this heating element guarantees a perfect fit and easy installation, allowing you to quickly restore your appliance's functionality. By choosing the Single Radiant Heating Element for Range, you benefit from improved cooking precision and uniform heat distribution, enhancing your overall kitchen experience. Whether you are repairing a malfunctioning range or upgrading an older model, this genuine OEM part offers a trusted solution to keep your Samsung range operating smoothly. Ensure your appliance performs at its best with this high-quality, reliable heating element.

The Broil Element is an OEM part for Whirlpool ranges. This part provides the intense, direct heat necessary for broiling. This part is located at the top of the oven cavity and is essential for achieving high temperatures needed for tasks like browning and searing.

Causes of a bad broil element can include electrical issues such as short circuits, damage from spills or food debris, and general wear and tear from repeated use.  

Symptoms of a bad Broil Element include:

• The oven not reaching broil temperatures
• Inconsistent or uneven broiling
• The element not glowing red when in use
• Visible signs of damage or burning on the element

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This oven igniter lights the gas for the oven burner so your range can preheat and maintain temperature. Replacing a weak or failed igniter restores reliable ignition and consistent oven heating performance.

• Heats to draw open the gas safety valve and ignite the oven burner
• Helps fix: oven not heating or failing to reach temperature
• Igniter glows but burner won't light, or takes a long time to light
• Intermittent oven heat or frequent preheat failures

• Disconnect power and shut off gas before servicing
• Handle the ceramic igniter carefully; avoid touching or stressing the heating element
• Transfer any required mounting hardware from the original and route wires away from hot surfaces
• After installation, restore power and gas and verify the burner lights and the flame is steady

2450w, low rise, attached ring

Restore even, reliable bottom heat with this hidden bake element assembly. Located beneath the oven floor, it delivers the heat needed for consistent preheating and baking when the original element is burned out or damaged.

• Supplies primary bottom heat during Bake cycles for electric ovens
• Helps achieve normal preheat times and maintain set temperature
• Replaces an element that is open/shorted or visibly blistered/broken
• Symptoms can include no heat in Bake, very long preheat, or uneven baking results

• Disconnect power at the breaker before servicing
• Remove oven racks and oven floor panel to access the hidden element
• Note wire positions; transfer and reconnect leads one at a time to the new element
• Inspect wiring and high-heat insulation; repair/replace any damaged connectors before reassembly

The bake element is the oven's primary lower heat source. Replacing a failed element restores proper preheating and even baking performance when the oven won't heat or struggles to maintain temperature during the bake cycle. What it does

• Provides the main heat for the bake cycle in electric ovens
• Common failure symptoms: no heat on bake, very slow preheat, or uneven baking
• Visible damage such as blistering, cracks, or burn spots on the element indicates replacement is needed
• Helps the oven reach and hold set temperature when functioning correctly

• 1 bake element

• Disconnect power at the breaker before servicing to prevent electrical shock
• Remove oven racks; access the element mounting screws from inside the oven cavity
• Carefully pull the element forward, support the wires, and transfer the connectors one at a time to avoid losing them behind the liner
• Ensure terminals are fully seated; do not overtighten mounting screws, then restore power and test bake

This oven igniter lights the gas burner when the control calls for heat, restoring reliable ignition and consistent baking performance. Replace it if the oven won't light, preheats slowly, or the flame won't stay on. What it does:

• Provides the ignition source for the oven's gas burner during bake cycles
• A weak or failed igniter can cause no heat/no bake or intermittent ignition
• Can contribute to extended preheat times and burners that light then go out
• Visible cracks, burned spots, or damaged leads on the igniter are common failure signs

• One oven igniter

• Disconnect power and shut off gas before servicing
• Allow components to cool; handle the igniter's ceramic/element carefully to avoid damage
• Install in the original position; correct placement relative to the burner is critical
• After reassembly, restore utilities and test for proper ignition; leak-check any disturbed gas fittings