Power Strike Small Engine Spark Plug Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 279366
The Moisture Sensor is an OEM part for Whirlpool dryers. This part detects the moisture level in the clothing during the drying cycle, allowing the dryer to adjust the drying time accordingly.
Causes of a bad moisture sensor can include regular wear and tear, buildup of lint or residue, or physical damage.
Symptoms of a bad moisture sensor include:
- Clothes taking longer to dry or coming out still damp
- The dryer not stopping when clothes are dry
- The dryer shutting off prematurely
- Inconsistent drying results
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dampness sensor was broken George L. • Marquette , MI • March 24, 2014
Viewed the video before I purchased the part. Received the part and put it in. Everything went as planned.
Read more
More
$74.95
- Compare At:
-
$89.94
- You Save:
-
$14.99
Genuine Lg part
By: Lg
Part Number: 6501EL3001A
The Igniter Sensor is an OEM part for LG dryers. This sensor plays a critical role in the ignition process, ensuring that the gas ignites properly to produce the heat necessary for drying clothes efficiently. It helps monitor and regulate the ignition temperature.
Over time, the igniter sensor can become faulty due to regular use, exposure to high temperatures, or electrical issues. These factors can lead to a malfunction, resulting in the dryer not heating properly or failing to start.
Symptoms of a bad igniter sensor include:
- Dryer not heating up
- Long drying times
- Dryer not starting
- Unusual smells or noises during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer started gas line good won't heat early model no codes Timothy M. • Roaring Spring , PA • November 25, 2016
Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns...
Read more
More
$138.95
- Compare At:
-
$165.35
- You Save:
-
$26.40
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304528973
Fix F95 error code or oven door that won't lock during self-clean cycle. This door lock motor assembly repair takes about 15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Led segments dying on the display + error f95 code when using the oven Robert L. • Massena , NY • December 14, 2014
I replaced the controller to remedy the LED display issue and changed the motor latch assembly to fix the F95 error. The installation of both parts was very easy. A local repair shop wanted a minimum of $115 just to show-up at my door, and their price for the same parts was over $140 what I paid at AppliancePartsPros. Thanks.
Read more
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35001193
Dryer runs but won't heat? A blown thermal fuse is the most common cause. This overheating safety device protects your dryer's heating system. DIY repair.
Do-It-Yourself Stories from Customers like You
No heat Tony M. • Chester , NJ • February 01, 2015
Removed the heater of course and installed the part. Very easy to do no need to remove the drum, just top cover, control panel, and front door assembly. Remove the one screw holding heater, remove blue wire, turn heater CCW to the 8 o'clock poisiton. Install in the reverse order. This is the secound one in a month if it fails again i'll just bypass it and install a 25 AMP fuse.
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Ge part
By: Ge
Part Number: WE04X25199
The Thermostat is an OEM component specifically designed for GE laundry machines. It is a heat-sensing component that monitors and regulates air temperatures inside the dryer drum. Precise thermostat functioning ensures proper drying temperatures are reached and maintained for optimal performance.
Symptoms of a bad thermostat include:
- The dryer failing to heat or only heating intermittently
- Unexpected temperature display readings or error codes
- Inconsistent moisture removal or garments not fully drying
Causes include sensor degradation, electrical faults, or improper ventilation reducing its ability to accurately measure temperatures.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No heat in gas dryer Peter S. • Glenview , IL • April 23, 2024
Realizing that there could be multiple reasons for a gas dryer failing to heat, I decided to test everything I could. The very detailed and product specific video showed me how to disassemble the dryer. The thermostat, cycling thermostat, high limit, flame detector, igniter, gas valve coils and timer all showed correct continuity or resistance. I thought it might be the gas valve itself, but felt that wasn't likely so I decided to go ahead and replace the thermostats and limit switch since...
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Ge part
By: Ge
Part Number: WB2K15
The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.
Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.
Symptoms of a bad Bumper include:
- Excessive noise
- Difficulty in sliding the drawer
- Misalignment
- Wear, and increased friction
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bumbers on stove top grates failed due to time of use Howard V. • Baton Rouge , LA • February 14, 2016
Looked for the parts at this site and ordered those need plus spares
Read more
More
$12.44
- Compare At:
-
$14.80
- You Save:
-
$2.36
Genuine Speed Queen part
By: Speed Queen
Part Number: 203573
Fix a washer lid that won't latch or lock during cycles with this lid lock catch assembly. Simple DIY repair requiring basic tools and screwdriver.
Do-It-Yourself Stories from Customers like You
The top of my speed queen had rushed really badly it was staining my clothes Sue T. • Wilmington , NC • February 28, 2026
My son-in -law replaced the entire lid and top along with the lid lock and safety lock on the lid. He has pictures of the process
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Genuine Ge part
By: Ge
Part Number: WE04X29714
Dryer not drying evenly or shutting off too soon? A faulty outlet thermistor causes inaccurate heat control. This sensor monitors exhaust temperature.
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304475
The Cycling Thermostat is an OEM part for Whirlpool dryers. This thermostat regulates the temperature inside the dryer by cycling the heating element on and off to maintain a consistent temperature. .
Causes of a bad cycling thermostat can include wear and tear over time, electrical faults, or damage due to overheating.
Symptoms of a bad Cycling Thermostat include:
- Clothes taking too long to dry
- The dryer not heating at all
- The dryer overheating
- Erratic or inconsistent drying temperatures
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 137353300
This washer door lock secures the door closed and communicates locked status to the control so cycles can run safely. Replacing a failed lock restores proper latching and may resolve no-start, spin, or door/lock error issues.
- Locks the door at the start of the cycle to prevent opening during wash and spin
- Signals the control when the door is closed and locked
- Releases the door at the end of the cycle
- Common symptoms: won't start, door won't lock/unlock, intermittent pauses, door/lock error message
What's included: One door lock assembly Install notes:
- Unplug the washer before servicing
- Access the lock from the front; remove the door gasket clamp and mounting screws (procedure varies by model)
- Transfer wires to the new lock one connector at a time; do not force terminals
- Verify the door striker engages smoothly and test an empty cycle before full use
Do-It-Yourself Stories from Customers like You
Our washer was randomly stopping, in some not all cycles with weight on the lid some cycles could finish. Michael H. • Reading , PA • March 28, 2022
Replacing the cycle switch and the lid switch, resolved the issues! Our washer operates like new again. From receipt of the parts to the first wash. The replacement of the parts took less than 20 minutes! Savings over the purchase of a new washer dryer combo: $1700-2200!
Read more
More
$79.95
- Compare At:
-
$95.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195934
Fix F5-E1 errors or doors that won't stay closed with a new door latch assembly. Solves latch cycling issues and false door-open warnings.
Do-It-Yourself Stories from Customers like You
Said door was open even when it was close Connie S. • River , KY • August 11, 2016
Replaced the latch. Everything works fine now
Read more
More
$160.95
- Compare At:
-
$191.53
- You Save:
-
$30.58
Genuine Ge part
By: Ge
Part Number: WD12X32799
Fix a detergent door that won't open during wash cycles. This dishwasher dispenser module restores proper detergent and rinse aid release timing.
Do-It-Yourself Stories from Customers like You
The dishwasher detergent door was not opening during the wash cycle. Mike E. • Moncks Corner , SC • January 19, 2021
I found a video on YouTube showing the exact repair sequence.
Read more
More
$45.63
- Compare At:
-
$54.30
- You Save:
-
$8.67
Genuine Ge part
By: Ge
Part Number: WE4M80
This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Lg part
By: Lg
Part Number: MFG62439301
Fix DE door error codes or doors that won't latch with this washer door latch hook. Simple 15-minute DIY repair with video guide. Secures door during cycles.
Do-It-Yourself Stories from Customers like You
LG front loader door error DE Phil P. • Fort Myers , FL • July 05, 2019
Changed out door switch and door latch hook. Watched video it was so easy. Appliance Parts Pros save me hundreds of $$$$. This is the 3rd time I used this company I must say they are the best.
Read more
More
$36.75
- Compare At:
-
$43.36
- You Save:
-
$6.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573028
Dryer won't heat or stops heating? This high limit thermostat monitors heater housing temperature and cuts power if it overheats. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Noisy bearings coming from the washing machine excessive dry times with the dryer Steve E. • Rochester Hills , MI • January 03, 2019
Washing machine should have been an easy fix that I had done before but ran into problems with the upper bearing and the bearing diameter on the shaft (a no go situation). By the time I was able to get the bearing seated I had damaged the new bearing. Much to my surprise Cierra in customer service sent me out a new bearing kit. I was then able to get the washer up and running with the new bearing kit and motor stator replacement.
The dryer was a matter of replacing all of the electrical...
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Ge part
By: Ge
Part Number: WE04X25195
Fix a dryer that won't heat properly or overheats with this thermostat. Senses exhaust temperature to regulate heat cycles and prevent damage.
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77