Need Help?
Call or text
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts. Read more
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
Fix IE error codes and water leaks with this dishwasher water inlet valve. Moderate difficulty repair requiring dishwasher removal and front access.
The insulation in my old Ohio house is terrible, and the Valve Assy, Inlet part under my dishwasher must have froze and burst when the temperature outside got below 0. I ordered this part here, and literally got it the next day. Awesome. The how-to video on the site was perfect. Not only did I replace the part in about an hour, but I saved ~$200 by canceling my LG service repair appointment. Read more
Dishwasher not filling with water or leaking? The water inlet valve controls water flow into the tub. Common DIY repair—moderately easy to replace.
I would open door after initial fill and noticed little or no water. I also could not hear water flowing from control valve. I replaced the water control valve and issue resolved Read more
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
By replacing the switches. Read more
Dishwasher leaking from underneath? A cracked or worn check valve assembly often causes pooling water. DIY-friendly repair takes about 30 minutes.
I ordered the part plus I replaced all of the other rubber/plastic parts just in case. My dishwasher is ten years old and still works great. Read more
This door-activated light switch controls the interior lamp in your refrigerator or freezer. Replace it to restore dependable on/off lighting when the door opens and closes and prevent a light that stays on and warms the compartment.
Ordered light switch and it arrived the following day with standard shipping! That was FAST!! Removed old swich, installed new, only 2 wire switch, very easy. I was very impressed with the 1 day delivery Read more
Fix dirty water backing up into your dishwasher with this check valve assembly. Prevents backflow from sink disposal. Easy 30-minute DIY repair.
I checked the drain hose for blocking at the garbage disposal and then at the connection point to the dishwasher. The hose was clear and nothing was obviously obstructing where the drain hose connects to the dishwasher. At this point I Googled the model number with the term "will not drain" and immediately landed on the AppliancePartsPros.com website. At the Drain & Wash Impeller Kit page amazingly had a video showing the technician replacing the impeller on a dishwasher essentially the same as... Read more
Fix a washer that won't fill properly or overfills with this water level pressure switch. Common when load size selector fails. 20-minute repair.
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws. Read more
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Replaced dual element switch. Fixed the problem. All is good Read more
The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.
Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.
Symptoms include:
This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
I replaced the switch Read more
Dishwasher overflowing or not filling properly? The float switch monitors water levels and prevents overflow. Watch our video for step-by-step help.
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
Ordered 2 light switches and replaced them. Read more
Fixes intermittent or erratic speed control on stand mixers. This electronic board regulates motor power for accurate, steady speeds across all settings.
Unplug the unit from power. Remove decorative aluminum band from motor enclosure by removing single screw at rear of mixer. Remove screws (now exposed) which secure the top half of the motor enclosure. Using a 1/8" punch, tap-out the pin that penetrates the planetary gear cover and the motor shaft (takes some finesse to avoid damage to the painted/coated planetary. It is a tight fit!) This will allow the planetary gear and cover to drop. Now the motor and gear unit can be removed. Do so... Read more
The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.
Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.
Symptoms of a bad switch gas valve include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Bought this switch gas valve for the non-functional burner, and it cleared right up. Read more
If your burner won't turn off or stays on high heat, this surface burner switch restores proper temperature control. Straightforward 30-minute repair.
I replaced the Switch for the burner. Works fine. Read more