Hardware Hand Small Engine On-Off Switch Parts
Genuine Samsung part
By: Samsung
Part Number: DC96-01703B
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung washer was getting stuck on 7 minutes and making lots of noise while spinning. Chris C. • Rocky Point , NY • September 01, 2017
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W10918003
Ice maker not harvesting or making ice? This rocker switch controls ice maker operation. Common fix when ice production stops despite good water flow.
More
$51.62
- Compare At:
-
$61.43
- You Save:
-
$9.81
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001514
Washer won't start or fill with water? A faulty lid switch assembly with fuse is often the cause. DIY-friendly repair—most complete it in under an hour.
Do-It-Yourself Stories from Customers like You
Bad lid switch assembly Jim A. • Navarre , FL • March 15, 2014
Removed front and top panels of washer, removed old switch assembly. Then mounted and hooked up new switch assembly, put panels back on, turned on power and unit now works fine. Thanks for the quick delivery on the part...our total machine down time was only 36 hours. Biggest difficulty was getting the machine out of its position to work on it!
Read more
More
$132.95
- Compare At:
-
$159.54
- You Save:
-
$26.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$64.70
- Compare At:
-
$76.99
- You Save:
-
$12.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238202
The Dual Element Surface Switch is an OEM part for Frigidaire electric ranges and cooktops. It governs power distribution to the dual element.
Causes may be loose electrical terminals within the switch, defects from past power surges, or general wear over extended use.
Symptoms of a bad surface switch include:
- Inability to toggle one or both elements independently
- Elements activating intermittently or staying stuck on
- Overheating, sparks or strange sounds from faulty connections
- Repeated burning or singeing of cookware bottoms
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Both large burners were starting to go to higher heats at lower settings. James T. • Hilo , HI • April 23, 2023
I replaced both the large single element and the large dual element control switches. It appears the resistors were burning out. Problem seems to be fixed. Will know later when I do some simmering.
Read more
More
$85.95
- Compare At:
-
$102.28
- You Save:
-
$16.33
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509458
This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.
- Transfers motion from the door-open button to the latch hooks to release the door
- Helps resolve a door that won't open when the button is pressed
- Addresses a button that feels loose, sticks, or lacks resistance
- Replaces a cracked or broken lever causing intermittent door operation
What's included: 1 lever Install notes:
- Unplug the microwave and discharge the high-voltage capacitor before servicing
- Remove the grille and control panel to access the interlock/latch area
- Note spring and pivot orientation and transfer any reusable hardware
- Test door release action before completing reassembly
Do-It-Yourself Stories from Customers like You
Microwave blew line fuse Gerald G. • St. Louis , MO • August 05, 2019
It took a long time to determine the problem but eventually I discovered that the plastic bracket (latch hook) that held the three door-switches showed appreciable wear from repeated door openings and closings. This wear stopped the door from sealing properly and the door switch safety mechanism blew the line fuse. I replaced the worn bracket (AP6230612) as well as the plastic latch mechanism (AP4553585) on the door that engages this bracket (and of course the fuse too) and the microwave now...
Read more
More
$7.67
- Compare At:
-
$9.13
- You Save:
-
$1.46
Genuine Ge part
By: Ge
Part Number: WH12X10141
Fix a washer that won't agitate or spin with this lid switch. This safety part detects if the lid is closed. Easy DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Washing machine would agitate but not spin Kevin T. • Overland Park , KS • January 27, 2020
Replaced lid switch and capacitor
Read more
More
$39.63
- Compare At:
-
$47.16
- You Save:
-
$7.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10149355
Fix burners stuck on high or not regulating temperature with this range infinite switch. Controls heating element power for precise cooking control.
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$148.53
- Compare At:
-
$176.75
- You Save:
-
$28.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Do-It-Yourself Stories from Customers like You
Burner control bad, could not tell if it was on the number Chalmer M. • Tipp City , OH • January 21, 2022
Remove front panel and replaced. Received parts fast.
Read more
More
$80.21
- Compare At:
-
$95.45
- You Save:
-
$15.24
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507924
Mounting screw for electric and gas ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or broken.
More
$8.40
- Compare At:
-
$8.64
- You Save:
-
$0.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820051
Fix washer overfilling or won't fill issues with a new water level pressure switch. Prevents flooding and restores proper fill cycles. 10-minute DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed and flooded the basement Tyler H. • Gardner , KS • February 27, 2016
Replaced the water-level switch and hose. Washer works again, no overflowing since!
Read more
More
$110.42
- Compare At:
-
$131.40
- You Save:
-
$20.98
Genuine Ge part
By: Ge
Part Number: WB01T10008
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't close tightly new hinges didn't fix the problem Paul S. • East Wenatchee , WA • October 26, 2020
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door.
The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time.
I replaced the inside steel panel. Took about an hour. Was able...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8054980
This lid switch is the washer's safety interlock. It detects when the lid is closed so the machine can agitate and spin, and cuts power when the lid is opened to stop operation and enhance user safety.
- Monitors lid position and allows agitation/spin only when the lid is closed
- Interrupts motor operation if the lid opens during a cycle
- Common failure symptoms: washer won't start or spin, fills but stalls, stops intermittently, or displays "lid open" alerts
- Restores proper cycle progression and safety shutoff when replaced
What's included: One lid switch Install notes:
- Disconnect power and water supply before servicing
- Access the switch from under the top panel/console per your model's procedure
- Release the old switch, move the harness to the new switch, and secure wiring away from moving parts
- Ensure the lid closes and actuates the switch before reassembly and test run
Do-It-Yourself Stories from Customers like You
Direct drive motor coupling failed wouldn't agitate or spin Tim H. • Fort Collins , CO • October 18, 2014
Was set to pull the trigger on a new washer since this one was 10+ years old. Broke a $25 lid switch fumbling to get the washer open before I found the appliancepros video library. Once I got things apart the right way I was able to diagnose the problem in 5 minutes. Identified the $10 part needed. Got the $10 coupling and the $25 switch and had the washer working like new in 20 minutes. I'm pretty proud of myself.. not going to tell anyone about the $25 switch.
Read more
More
$115.49
- Compare At:
-
$136.28
- You Save:
-
$20.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 240505801
Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser actuator, rusty front plate, bad fridge door switch Michael A. • Garnerville , NY • August 06, 2020
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you...
Read more
More
$64.95
- Compare At:
-
$77.94
- You Save:
-
$12.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 316239601KIT
Fix a burner that won't turn off or heat properly with this dual infinite switch. Controls both inner and outer element rings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Needed a surface element dual control switch for my frigidaire range as the surface element would remain on èven when the switch was turned off Michael H. • Lauderhill , FL • July 22, 2016
Relatively easy DIY
Read more
More
$71.95
- Compare At:
-
$133.26
- You Save:
-
$61.31
Genuine Ge part
By: Ge
Part Number: WB01X34910
The Door Removal Tool is an OEM replacement part for GE microwave ovens. It is a specialized tool designed to assist in the safe and proper removal of the microwave door. This tool is essential for servicing, repairing, or replacing components within the microwave cavity, ensuring that the door can be securely detached and reattached without causing any damage.
Symptoms of needing the Door Removal Tool include:
- Requirement to access the interior components of the microwave for repairs or maintenance
- Difficulty in removing the microwave door using conventional methods
- Potential risk of damaging the door or other components without the proper tool
Causes for needing the Door Removal Tool can vary, but it is typically required when performing tasks such as replacing the magnetron, waveguide cover, or other internal parts that necessitate door removal for access.
This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore microwave models.
Do-It-Yourself Stories from Customers like You
The broken upper door for GE microwave/oven combo. Charles S. • Triangle , VA • October 03, 2021
The repair was fairly straightforward. I used the enclosed door removal tools to remove the old door. Then I slid the new door into place. The whole process probably took 1 minute.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46