Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Outer Ecb Parts

Washer Dryer Combo Electronic Control Board
Genuine Ge part
By: Ge
Part Number: WH12X20274

Won't start, spin light blinking, or won't stop spinning? This control board manages cycles and settings. Common DIY repair, typically installed in minutes.

Do-It-Yourself Stories from Customers like You Lights on washer are lit and will not turn off. Washer will not turn on   Tommy L. • Hilton Head Island , SC • July 04, 2019

Remove the 2 screws that hold on the front cover just above the washer, the control board is in front of you. Remove the 2 small screws that secure the board, they are star screws, very small ones, do not drop them, for they will fall into the washer tub. Take a picture of the wiring harness, press the 2 tabs on each side of the board, left and right side, the board will pop out. replace the wiring harness, wiring harness has tabs that hold them in place. Also, check the magnetic lid switch,... Read more

More
$206.95
Compare At:
$246.27
You Save:
$39.32

IN STOCK
Ships Monday Guaranteed
Add to Cart
Range Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8507P232-60

Oven not heating or display not responding? This electronic control board manages temperature, timing, and keypad functions. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Front panel stopped working and so did the oven bake time   David R. • Portland , OR • November 22, 2018

My 15 year old son and I examined the new parts and made a plan for how we were going to take the front off of the oven. Turns out it was fairly simple. We removed the knobs, the knob shrouds, two philip screws on the side of the head and about 6, 6mm hex sheet screws. Voila! It came apart. We carefully looked at how the old parts were assembled and simply reversed the assembly with the new parts. Since one of our parts was the entire front head, it went together quickly and it was a perfect... Read more

More
$293.95
Compare At:
$346.86
You Save:
$52.91

IN STOCK
Ships Monday Guaranteed
Add to Cart
Microwave Inverter Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W11325604

Microwave not heating or showing F1 E5 error? This inverter board converts voltage to power the magnetron. Requires tech sheet for testing procedures.

More
$144.40
Compare At:
$171.84
You Save:
$27.44

IN STOCK
Ships Monday Guaranteed
Add to Cart
Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 316462807

This OEM replacement part is an oven control board. The oven control board is the primary computer circuit board that controls the main functions of the oven. These functions include turning the oven on as well as adjusting and maintaining the temperature of the oven. Luckily, replacing a control board is a simple process.To replace the board, first, make sure the oven is unplugged. Gain access to the back of the oven and remove the upper back panel. Once the panel is removed, locate the old control board. Take note of the orientation of the wires by taking a photo with a phone camera. Disconnect the wire harness and any individual wires that are attached to the old board. Re-secure the wires into their correct positions. Snap the new board back in place and reinstall the upper back panel.This genuine replacement control board is compatible with Frigidaire Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.

Do-It-Yourself Stories from Customers like You Kenmore Model 790 Electric Range. Would not get above 250 degrees. Had been taking increasing amount of time to pre-heat.   Joseph N. • Abingdon , MD • April 04, 2014

Ohm'ed out the heat elements and both were good. Outlet had 240 volts. I had reviewed several items on the internet. Everything pointed to the control board. Ordered the part on a Sunday night using standard shipping and received it Tuesday. Replaced and tested. Over is working again. Read more

More
$315.55
Compare At:
$375.50
You Save:
$59.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Range Clock Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304510580

Fix a blank display, beeping error codes, or non-working oven timer with this range clock control board. Most DIYers complete this repair in 15 minutes.

Do-It-Yourself Stories from Customers like You The display on my kitchen aid gas stove went blank the burners still worked but nothing for the oven   Craig M. • N. Billerica , MA • April 21, 2014

I looked up and ordered a new display panel. Since it was not showing anything I was hoping something on the board just failed. When I got the new part I plugged it in and it has been working fine since. I wish I could have found some trouble shooting options for this type of problem but I could not find anything related to a blank display. Like I said fortunately the new panel worked. Iremember it took about 4 days to get the part which was not bad considering I did not want to pay for... Read more

More
$223.95
Compare At:
$266.50
You Save:
$42.55

IN STOCK
Ships Monday Guaranteed
Add to Cart
Range Oven Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: 8186394

Oven not heating, switches to broil instead of bake, or buttons unresponsive? The control board regulates bake functions and temperature settings.

Do-It-Yourself Stories from Customers like You Oven control board.   Ken L. • Blowing Rock , NC • December 15, 2023

Replaced the part. Read more

More
$231.95
Compare At:
$276.02
You Save:
$44.07

IN STOCK
Ships Monday Guaranteed
Add to Cart
Washer Dryer Combo Timer
Genuine Ge part
By: Ge
Part Number: WH12X10164

Washer fills but won't agitate or advance cycles? The timer controls wash, rinse, and spin sequences. DIY repair typically takes 15-30 minutes.

Do-It-Yourself Stories from Customers like You Idler was broken and the timer no longer functioned properly   George H. • Miami , FL • September 20, 2014

I live overseas and these parts were not available locally. I have a repair person who takes care of all my appliances. He installed the new parts in about 15 minutes and my washer is working fine now. Read more

More
$267.95
Compare At:
$318.86
You Save:
$50.91

IN STOCK
Ships Monday Guaranteed
Add to Cart
Clock (Oven Control Board)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP71003401

Electronic clock control for the oven/range. This board drives the display and manages bake/broil commands, restoring accurate timekeeping and dependable oven controls when the original control has failed.

  • Governs oven operations by processing keypad inputs and signaling the heating circuits for bake and broil
  • Displays clock, timer, and status information
  • Monitors system feedback and can trigger fault alerts when issues are detected
  • Common failure signs: blank or flickering display
  • Oven won't start, won't respond to settings, or shows recurring control fault codes
What's included: 1 electronic control board Install notes:
  • Disconnect power at the breaker and verify no voltage before servicing
  • Use anti-static precautions; handle the board by the edges
  • Note wire/connecter locations and transfer them one at a time; reuse any brackets/trim your model requires
  • After installation, set the clock and run a test bake/broil; clear stored codes if applicable

Do-It-Yourself Stories from Customers like You Display was dimming almost couldn't see the numbers   Carol C. • Modesto , CA • December 01, 2014

Ordered oven control board. easy fix, less than 15 minutes. works great! Read more

More
$283.79
Compare At:
$307.88
You Save:
$24.09

IN STOCK
Ships Monday Guaranteed
Add to Cart
Dryer Timer
Genuine Frigidaire part
By: Frigidaire
Part Number: 131062300

If your dryer won't shut off or cycles won't advance, the timer may have failed. This control manages drying cycles and run time. DIY repair in 20 minutes.

This part fixes the following symptoms
  • Doesn't shut off
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The timer had stopped advancing   William S. • Arlington , TX • April 03, 2017

With a Phillips screw driver, on the back of the control panel there was about 6 or 7 screws to undo, to take the cover off and 2 screws holding the timer in place. Just undone those, took out old timer, made sure I took wires from old timer one at a time, and, put on new timer. Put everything back, although I had to find a couple of very small washers to make the timer fit tight, in the 2 holes it came out of. Luckily I had those or would of been a very loose timer. Very easy to do. Read more

More
$194.63
Compare At:
$231.61
You Save:
$36.98

IN STOCK
Ships Monday Guaranteed
Add to Cart
Dishwasher Electronic Control Board
Genuine Samsung part
By: Samsung
Part Number: DD82-01337B

The Dishwasher Electronic Control Board is essential for managing the various functions of your dishwasher efficiently. This genuine OEM part ensures reliable performance and seamless integration with your Samsung dishwasher. Designed to handle multiple cycles and settings, it helps maintain optimal cleaning results every time. The Electronic Control Board features durable components that contribute to the longevity of your appliance, reducing the need for frequent repairs. Its precise engineering allows for easy installation, making it a convenient solution for restoring your dishwasherGÇÖs functionality. Compatible with a range of Samsung dishwasher models, this genuine OEM part guarantees a perfect fit and dependable operation. By choosing the Dishwasher Electronic Control Board , you enhance your applianceGÇÖs reliability and ensure it continues to perform at its best, providing you with the quality and efficiency you expect from Samsung.

More
$184.27
Compare At:
$217.44
You Save:
$33.17

IN STOCK
Ships Monday Guaranteed
Add to Cart
Dishwasher Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W11305297

Dishwasher won't start or shows error codes? The electronic control board regulates all cycles and functions. Moderate difficulty repair.

Do-It-Yourself Stories from Customers like You Control board.   Jerry F. • Villa Rica , GA • September 22, 2023

Ordered new board and replaced it. Read more

More
$164.78
Compare At:
$196.09
You Save:
$31.31

IN STOCK
Ships Monday Guaranteed
Add to Cart
Washer Timer Control
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3948852

Fix a washer that stops mid-cycle or won't advance through wash phases. This mechanical timer restores proper cycle sequencing. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You The clothes washer wouldn't advance to the next phase of the selected cycle   Glenn C. • Gainesville , FL • October 09, 2015

I replaced the timer...I talked with a tech to make sure the timer I ordered was the correct one. Watching the video was a great help especially with removing the knob. Plus the video showed a couple of tips. While not exactly the same timer it was very helpful. As a side note the timer arrived so fast I was shocked. A semi-difficult job made very easy. Read more

More
$207.95
Compare At:
$247.46
You Save:
$39.51

IN STOCK
Ships Monday Guaranteed
Add to Cart
Dishwasher Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285178

Dishwasher won't start, lights blinking, or cycles not completing? The electronic control board manages all wash functions. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Blinking light.   James J. • Ruston , LA • February 24, 2024

Ordered the electronic board for the dishwasher and replaced it. And it fixed it. Read more

More
$204.68
Compare At:
$225.15
You Save:
$20.47

IN STOCK
Ships Monday Guaranteed
Add to Cart
Range Surface Element Control Board With Potentiometer And Display
Genuine Frigidaire part
By: Frigidaire
Part Number: 316441804

This is an electronic control board that manages the surface (cooktop) heating elements on an electric range. It includes a potentiometer and display panel that regulate element power levels and show settings. Replace this board if your cooktop burners fail to heat properly, cycle erratically, or if the surface element display is unresponsive or showing error codes.

Do-It-Yourself Stories from Customers like You Old part cracked off so you could not use it   William H. • North Fort Myers , FL • October 31, 2014

Part came in fast and was easy to put on. Turn off elect. and take front panel up , replace part and put back pannel. Read more

More
$201.33
Compare At:
$239.58
You Save:
$38.25

IN STOCK
Ships Monday Guaranteed
Add to Cart
Washer Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480177

Fix a washer that won't start, cycle properly, or respond to controls. This control board replacement restores normal operation. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Washing machine would not cycle correctly   Mike H. • Waukesha , WI • February 07, 2015

Removed control panel from the machine, unbolted control board, replaced with new one, changed connections from old to new and put back together. Read more

More
$207.50
Compare At:
$208.74
You Save:
$1.24

IN STOCK
Ships Monday Guaranteed
Add to Cart
Washer Encoder Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W11481116

Fix a washer with no lights or unresponsive controls by replacing the encoder control board. Moderate difficulty repair requiring panel removal.

More
$59.48
Compare At:
$70.78
You Save:
$11.30

IN STOCK
Ships Monday Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store