Need Help?
Call
Fixes no ice production, ice maker not harvesting, or stuck ice cubes. Common repair for failed electronic controls or frozen cold plate issues.
Fix ice dispenser grinding noises and jams with this lower ice crusher bin. Supports crusher blades and restores smooth crushed-ice dispensing.
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw. Read more
Ice maker not making ice or producing tiny cubes? This complete ice maker assembly restores full ice production. DIY repair with just 3-4 screws.
Replaced ice maker assy Read more
Refrigerator not making ice or ice maker not harvesting? This complete ice maker assembly fixes no ice production. DIY-friendly, 10-30 minute install.
By replacing the ice maker after trying the electronic boards and water infill valve first. Your people were incredibly helpful. Read more
If your mixer won't start smoothly or speed settings aren't accurate, this speed control board regulates motor power. DIY-friendly replacement.
Fixed with your replacement Read more
This refrigerator ice maker assembly freezes water and automatically ejects cubes into the bin. Replacing a failed unit restores steady, hands-free ice production and helps resolve common ice maker cycling and cube-ejection issues.
The ice maker stopped producing ice. The motor just made a periodic spinning noise and the ice maker never filled with water. I ordered a replacement ice maker and the valve just in case. I just ended up replacing the ice maker, which is just two screws and a plug. A couple hours later, the new Ice maker was making ice as good as new. Read more
Ice won't dispense or jams in crushed mode? This crusher blade fixes bent or broken blades in your ice bucket assembly. Easy DIY repair with video guide.
This is the second time of needing repair. I remove the ice bucket, open the crusher, remove the 5 blades. Straighten the blades, reinstall. I then order new blades, The next time it happens I will install the new blades. The reason for the malfunction, (my guess), two ice cubes partially melted stick together and the size and angel the enter crusher cause the problem. I don't see it as the crusher problem or the blades being to weak. The ice container gets over full, opening and closing the... Read more
Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.
Replaced the gear. Now it's making ice again. Perfect. Read more
Burners won't light or no clicking sound? This spark module sends high-voltage pulses to ignite surface burners. DIY-friendly replacement fixes ignition.
Replace spark module. Read more
Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.
We followed YouTube demonstration and it matched my newer model freezer. The manuf. model number is not similar to any online parts supplier. That made my ordering risky. Read more
Fix a dishwasher that won't start, stops mid-cycle, or has dim lights with a new electronic control board. Moderate DIY repair, 45-60 minutes.
Replaced control board. This project took about 45 minutes to complete. It helps if you have two people because at one point you need to squeeze 4 plastic clips. Also helps when switching wire from one board to the other. I am 71 years old and this was a very easy task. Read more
Ice not dispensing or jamming in your side-by-side refrigerator? This ice container assembly stores and delivers ice to the dispenser. DIY repair.
Replaced the ice container assembly. Read more
Dishwasher won't start or shows error codes? The electronic control board regulates all cycles and functions. Moderate difficulty repair.
Ordered new board and replaced it. Read more
Ice dumping on freezer floor instead of bin? A broken ice maker cover door causes ice to miss the chute. This snap-on cover restores proper ice dispensing.
The video was great - followed the instructions - replaced the parts - icemaker is working like new now. Read more
Ice maker overflowing or won't stop making ice? This shut-off arm senses ice levels to control production. Simple DIY fix in under an hour.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more
This radiant cartridge is the plug-in cooking surface used on Designer Line modular cooktops. It restores a smooth black surface and consistent, even heat when the original cartridge is damaged or no longer heating properly.
Replaced with the new burners Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.