Electrical Panel Parts

This refrigerator door flipper mullion is the folding center rail that bridges the gap between the doors. It helps complete the door seal and reduces condensation along the center for better temperature retention.

• Bridges the gap between doors to complete the center seal and improve efficiency
• Folds out of the way when a door opens; flips into place as the doors close
• Helps limit moisture/sweating at the middle of the refrigerator
• Replaces a cracked, loose, or broken mullion that causes air leaks, doors popping open, or poor sealing

• Disconnect power before servicing; remove door bins for access
• Remove mounting screws; lift off the assembly and disconnect the harness if equipped
• Transfer any end caps/brackets; ensure spring orientation and proper wire routing during reassembly
• After installation, verify smooth flipping action and a continuous gasket seal down the center

The Lid Assembly is an OEM part for GE washing machines. This part is the lid of the washer. It is essential for securely covering the washer drum, preventing water from splashing out during the wash cycle, and allowing safe operation by ensuring the washer does not run with the lid open.

Causes of a bad lid assembly can include general wear and tear, physical damage from heavy loads or impacts, or issues with the hinges or latch mechanisms.

Symptoms of a bad lid assembly include:

• Difficulty in opening or closing the lid
• Washer not starting or stopping mid-cycle due to a faulty lid switch
• Visible cracks or damage on the lid
• Water leaking from the top of the washer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Controls airflow through your microwave's ventilation system. Installs at exhaust opening to prevent air backflow. Replace if cracked, missing, or damaged.

Restore a tight, even seal between your refrigerator's doors. This vertical mullion assembly flips into place to cover the center gap, helping maintain proper temperatures and reduce condensation.

• Bridges the gap between doors to create a continuous sealing surface
• Helps keep cold air in and warm air out for consistent cooling
• Aids proper door alignment and smooth closing
• Common symptoms of a failed mullion: broken or wobbly flipper, doors not closing fully or popping open, moisture/icing at the center, warming in the fresh food section

• Disconnect power before servicing and open the doors
• With the door open, release the retaining screws or tabs and lift the old mullion off the upper and lower pivots
• Position the new assembly on the pivots, secure it, and verify the flipper moves freely and seals evenly against the opposite door
• Restore power and recheck door operation and gasket contact along the full height

Front facia panel for Bosch dishwashers that houses control buttons and display. Replace if cracked, broken, or worn. Installs at the top of the door.

The Freezer door assembly is essential for maintaining the efficiency of your bottom-mount refrigerator. This genuine OEM part ensures a snug and reliable seal, preventing cold air from escaping and keeping your freezer at the optimal temperature. By effectively insulating the door, it helps reduce energy consumption, which can lead to lower utility bills and a more eco-friendly household. The durable design of the seal assembly withstands daily use, ensuring long-lasting performance and protecting your food from freezer burn. Compatible with a variety of Samsung bottom-mount refrigerator models, this door seal assembly is straightforward to install, allowing you to restore your applianceGÇÖs functionality with ease. Whether replacing a cracked, worn, or damaged seal, the Refrigerator Freezer Door Seal Assembly provides a dependable solution to keep your refrigerator running smoothly and your items fresh.

Includes door assembly and internal latch parts.

White front access panel for dishwasher door. Replace worn, discolored, or damaged panels to restore your dishwasher's appearance. Direct fit installation.

This is the lower access panel, also called a toe panel, that attaches to the front bottom of the washer. It covers the internal components beneath the drum area and provides a finished appearance. Replace this panel if it is dented, cracked, rusted, or if the mounting tabs are broken, leaving the lower portion of the machine exposed.

Labeled overlay that mounts on your dishwasher control console. Replaces faded, cracked, or peeling graphics to restore clear control markings.

The gas range drawer front panel is the exterior facing panel on the storage or warming drawer located at the bottom of your gas range. It gives the lower drawer a finished look that matches the rest of the range and provides a handle for opening and closing the drawer. Replace this part if the panel is cracked, dented, discolored, or has come detached from the drawer.

This is the stainless steel outer panel that attaches to the front of the trash compactor drawer, providing the visible exterior finish. It serves as the decorative and protective face of the compactor door. Replace this panel if it is dented, scratched, rusted, or if you are updating the appearance of your trash compactor to match other stainless appliances.

Replacement front cover for dishwasher control module. Needed when plastic is cracked, broken, or switch actuators are worn or missing. Protects control board.

Front control panel fascia that houses and protects buttons and labels. Replace if your fascia is cracked, broken, or worn to restore proper appearance.

Outer door panel for dishwashers. Installs on the front of the dishwasher door. Replace if scratched, dented, or to change color finishes.

Color: Black

This replacement lid fits the refrigerator utility/bin drawer and restores a secure cover to keep stored items contained and organized. It replaces cracked, broken or warped lids so the bin functions as intended. What it does:

• Covers and protects items stored in the utility/bin drawer
• Replaces lids that are cracked, chipped or no longer latch properly
• Helps prevent items from shifting or falling into other compartments
• Restores a proper seal and alignment of the utility/bin cover

• Unplug or disconnect power to the appliance before servicing for safety
• Remove the bin/drawer per the manufacturer instructions to access the lid
• Align hinge tabs or mounting points and snap or fasten the lid into place
• Handle carefully; plastic edges or mounting points can be fragile during installation