Power Small Engine Start Switch Parts
Genuine Bosch part
By: Bosch
Part Number: 00611665
Dishwasher overflowing or not filling properly? The float switch monitors water levels and prevents overflow. Watch our video for step-by-step help.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241554901
Refrigerator interior light won't turn on or stays on? This door light switch controls your fridge lighting. Quick DIY fix with basic tools.
Do-It-Yourself Stories from Customers like You
Light in refrigerator quit working Joseph S. • Wapakoneta , OH • June 27, 2014
Ordered switch....turned out it was the socket that was bad...ordered socket.....quick install....light works
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X29714
Dryer not drying evenly or shutting off too soon? A faulty outlet thermistor causes inaccurate heat control. This sensor monitors exhaust temperature.
More
Genuine Ge part
By: Ge
Part Number: WH12X10476
Fix washer overfilling or not filling properly. This pressure switch controls water level for proper washing. DIY-friendly, takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Washer was leaking water Jerry M. • Mansfield , TX • June 06, 2014
I thought initially it was a hose because it was leaking water from the bottom. On the small and medium load it didn't leak. I watched it on the large setting and noticed the water didn't shut off initially so therefore it was over filling. I ordered a switch pressure switch from Appliance Parts Pros and received it in two days. I replaced the switch, put the washer together and now it works like new. The wife is very happy to have her washer back working better than ever! Thanks!
Jerry
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304475
The Cycling Thermostat is an OEM part for Whirlpool dryers. This thermostat regulates the temperature inside the dryer by cycling the heating element on and off to maintain a consistent temperature. .
Causes of a bad cycling thermostat can include wear and tear over time, electrical faults, or damage due to overheating.
Symptoms of a bad Cycling Thermostat include:
- Clothes taking too long to dry
- The dryer not heating at all
- The dryer overheating
- Erratic or inconsistent drying temperatures
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 297243800
This door-activated light switch controls the interior lamp in your refrigerator or freezer. Replace it to restore dependable on/off lighting when the door opens and closes and prevent a light that stays on and warms the compartment.
- Activates the interior light when the door opens and switches it off when closed
- Helps resolve no interior light, light staying on, or a broken/stuck switch plunger
- Restores reliable visibility inside the compartment
- Direct replacement for the original switch connection
What's included: One light switch Install notes:
- Disconnect power before servicing
- Release the switch from the liner and gently pull it out
- Transfer wires to the new switch one at a time to maintain correct connections
- Seat the switch flush; restore power and verify the light turns off when the door closes
Do-It-Yourself Stories from Customers like You
Bad door switch prevented light from working when opening door Thomas C. • Sarasota , FL • October 05, 2014
Ordered light switch and it arrived the following day with standard shipping! That was FAST!!
Removed old swich, installed new, only 2 wire switch, very easy.
I was very impressed with the 1 day delivery
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11123943
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The refrigerator would not make ice or dispense water or ice. Ken W. • Aurora , CO • June 15, 2022
Part easily replaced and problem was solved. Saved service call.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316246
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387913
Refrigerator not cooling or freezing? A faulty start relay prevents the compressor from running. This kit fixes humming compressors in about 20 minutes.
This part fixes the following symptoms
-
Won't start
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Refrigerator was not cooling Dennis L. • Mount Wolf , PA • October 31, 2016
Took access panel off the back of the refrigerator with 1/4 inch nut driver and found that the compressor was not running properly (humming and hot but not compressing). The compressor cooling fan was working as well as the fan in the freezer compartment.
I fixed the same problem with another refrigerator by replacing the relay and start capacitor on the compressor. I pulled these two items from the compressor connector (gently pry the brown part from the comp terminals first and then the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10911303
Burner won't heat or stuck on one temperature? This infinite switch controls your range surface element heat levels. DIY repair restores precise cooking.
Do-It-Yourself Stories from Customers like You
Oven fan code & all knobs needed to be replaced. Craig L. • Avon , CO • November 08, 2020
I was able to clean the Oven Temp Sensor with 99% alcohol. Then replaced All switches (after breaker was isolated). Put it all back the way I found it. Turned on breaker. Tested all functions and had no reports of Fan Code re-appearing since.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285518
Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.
Do-It-Yourself Stories from Customers like You
Only hot water no matter what setting Jane D. • Newport , RI • June 23, 2025
Ordered the right part, took the back off the top control panel, and popped it in.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR07X10057
Refrigerator won't cool and compressor won't run? A faulty start relay prevents the compressor from starting. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Refrigerator not cold everything is running except the compressor. George F. • Perkasie , PA • January 09, 2022
Check compressor with my Hotwire kit I made when I worked for GE. When removing the compressor relay it broke in pieces. Ordered and replaced new relay, overload & run capacitor. Still did not work. Check if there’s power to compressor and found no voltage. Took control board out and found a component burnt. Ordered and replaced control board. Everything is back to normal. Love your service. Parts was supposed to come in 3-5 days but came next day instead. I am very very impressed and grateful....
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415587
This switch monitors water levels in the washing machine tub and signals when the correct amount has been reached. Located near the control panel or top of the washer, connected to a pressure tube. Replace when the washer overfills, underfills, or won't start filling with water.
Do-It-Yourself Stories from Customers like You
Whirlpool washer has a f35 code (analog pressure sensor) Paul M. • Carlisle , PA • June 13, 2014
I was searching the web for solutions and came across two folks who had similar trouble code. One fixed his by removing the pump strainer from the pump to find coins blocking water flow, thus the analog water pressure sensor provided a failure response. My issue was solved by following the other hints I got. I ordered a new sensor (switch). It was expensive for what it is, but the washer will not run correctly without it! The part arrived in a very timely manner, and it was the right part....
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M80
This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More