Power Strike Small Engine Regular Starter Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1182
Dryer won't start or has no power? A blown thermal fuse is the likely cause. This safety device cuts power when overheating occurs. DIY fix.
Do-It-Yourself Stories from Customers like You
Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting Timothy E. • Bellvue , CO • September 15, 2019
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4930EL2003B
This is a mounting holder or grille that secures the moisture sensor bars inside the dryer drum area. The moisture sensor detects how wet the clothes are and signals the control board to end the cycle when they're dry. Replace this holder if it is cracked, broken, or missing, which can cause the sensor bars to be misaligned and lead to clothes coming out still damp or the dryer running too long.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510181
Fix a dryer door that won't stay closed or pops open during cycles. This metal door strike secures the door and engages the safety switch. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Metal piece broke, couldn’t close door Lloyd G. • Roslyn Heights , NY • November 04, 2020
Just replaced part, very easy fix.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D513505
This 3-position fabric selector switch is the control behind the knob that lets you choose the fabric setting on your unit. Replacing a worn switch restores positive detents and ensures your selection is recognized instead of ignored or stuck.
- Provides three selectable fabric settings to tailor operation
- Routes the chosen setting to the timer/control
- Typical symptoms: no response when changing settings, intermittent selection, or being stuck on one mode
- Physical clues of failure: loose/no detent feel, broken shaft, or heat-discolored terminals
What's included: One 3-position fabric selector switch Installation notes:
- Disconnect power before servicing
- Access the control console; remove the knob and retaining hardware to free the old switch
- Photograph/label wire positions and transfer each lead to the same terminals on the new switch
- Reassemble and test all three positions for proper engagement
Do-It-Yourself Stories from Customers like You
Dryer not heating Sandy H. • Burkesville , KY • January 14, 2017
Replaced the fabric selector switch. Took abut fifteen minutes. Dryer works fine.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002754
Fix a washer that won't start when the lid is closed with this lid switch plunger. Simple DIY repair—just remove two screws and realign. Video included.
Do-It-Yourself Stories from Customers like You
Lid switch was not turning on, washer filled but didn't wash spin etc George J. • Hopewell , IL • March 02, 2020
I replaced the switch, the plunger, plunger guide and the lid cam, but the cam still didn't turn on the switch. Turned out someone had stood on the washer and bent the lid slightly, not enough to notice, but since I had ruled out just about everything else I started looking at the lid itself. I ended up bending it back close to it's original shape and now it works fine. I guess I learned a few things about washing machines though. One lesson is when you pull off the controls, the hose leading...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5366021400
Dryer door won't latch or stay closed? This door latch kit restores secure closing. Simple snap-in installation takes under 5 minutes, no tools needed.
This part fixes the following symptoms
-
Door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Door latch on dryer Larry K. • Mifflinburg , PA • October 11, 2014
Took all of 5 minutes parts was a lot cheaper than others I looked at and was the same thing
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404154
Dryer not heating or shuts off after a few minutes? A faulty thermostat often causes temperature regulation failure. Easy DIY fix with a multimeter test.
Do-It-Yourself Stories from Customers like You
Whirlpool Thin Twin mod LTE5243DZ2 dryer ran but was not creating heat David G. • York Springs , PA • July 17, 2019
I checked the continuity on the thermal fuse (which was blown) and knew that it needed to be replaced. This made me question why it blew (i.e. what caused it to fail). I checked continuity on the thermostat (high limit) as well as the thermostat for the element. Both passed a continuity test, so I removed the high limit thermostat to inspect it and could hear it rattling inside. This leads me to believe the spring inside had failed, so I replaced this thermostat as well. Put it back...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304440314
Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Microwave door would not close this would not engage Nancy C. • Woolford , MD • March 19, 2017
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11252738
Fix a washer that won't spin or start due to a faulty door strike. This latch component ensures secure lid closure for proper operation. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Would not spin Heather G. • Morganton , NC • December 03, 2018
Replaced Latch
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M160
Hi-limit thermostat. L210.
Do-It-Yourself Stories from Customers like You
Low heat Larry S. • Parrish , FL • January 21, 2016
Ordered a new safety thermostat. Installed it in 10 minutes and good as new.
Thanks for your great trouble shooting and fast parts the repair was a breeze.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307250
Dryer runs but won't cycle off or cycles too frequently? A faulty cycling thermostat may be the cause. This common repair takes 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Auto dry wouldn't shut off on maytag dryer Donald G. • Auburn , NY • September 11, 2017
Replaced timer and cycling thermostat. cycling thermostat was the problem. For some reason it wasn't getting the message to the timer needed to cycle the dial.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387137
This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.
- Controls the cycling temperature of the heating circuit to prevent underheating or overheating
- Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
- A faulty thermostat may cause overheating that can trip the thermal fuse
- Located on the blower housing on many models
What's included: 1 internal-bias thermostat Install notes:
- Disconnect power and shut off gas (for gas dryers) before servicing
- Access the blower housing; note wire positions and transfer one at a time
- Mount the thermostat flush to the housing for proper sensing
- After installation, run a test cycle to verify proper heating
Do-It-Yourself Stories from Customers like You
Thermal fuse blew John P. • Palm Coast , FL • January 02, 2016
Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134711200
Fix a dryer that won't shut off automatically or has temperature control issues. This thermistor sensor monitors heat levels for proper cycle operation.
Do-It-Yourself Stories from Customers like You
It was taking to long to dry Peter H. • Williston , ND • October 22, 2017
I replaced the thermostat. The bearing on the motor was getting loose, so I changed the motor to.
The repair took about 2 hours.
There are some good re[air videos on the parts web site.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600
This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:
- Detects door position and allows operation only when the door is fully closed
- Interrupts operation when the door opens for safety
- Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
- Intermittent starts due to worn actuator or internal switch contacts
What's included:
Install notes:
- Disconnect power before servicing
- Access the switch from the front or top panel; release mounting screws or tabs
- Move wires to the new switch one at a time to maintain correct positions, then secure the switch
- Test operation before reassembly
More
Genuine Frigidaire part
By: Frigidaire
Part Number: A00104102
Door won't stay closed or latch? This dishwasher door latch assembly restores secure closing and proper door recognition. Easy 10-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Broken dishwasher latch. Michael M. • Middle River , MD • January 24, 2018
I always come to Appliance Parts Pros for my parts. Ordered the handle, and it arrived in a few days. Took me all of 10 minutes to replace the worn part. Even picked up a new tub gasket while I was at on here. That has made the washer a lot less noisy. I recommend these guys to anyone who is even a novice DIYer.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA34-10003S
Compressor won't start or cycles on and off every few minutes? This overload relay protects against overheating. DIY repair in about 10 minutes.
Do-It-Yourself Stories from Customers like You
Samsung dual cooling neither frig or freezer was cold Philip H. • Hazleton , PA • October 12, 2014
The compressor was very hot and did not appear to be running. You could here a relay click on and off 15sec cycle. repeating every 2 minutes!
Bought a new overload relay too repair, plus a new thermal protection switch because it was cheap.
Both parts are actually located on the compressor behind a plastic cover. Found part numbers for parts by searching the compressor number on google! $25 Repair............
Read more
More