Push Button Start Switch Parts
Genuine Samsung part
By: Samsung
Part Number: DA34-00011B
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
Do-It-Yourself Stories from Customers like You
There was no water dispensed and one led was burned out Ralph T. • Fishers , IN • August 15, 2016
I replaced the control board and the microswitch.
Read more
More
$26.74
- Compare At:
-
$31.82
- You Save:
-
$5.08
Genuine Ge part
By: Ge
Part Number: WB04K10037
Decorative trim skirt that fits around range control knobs on the front panel. Replace if cracked, disintegrating, melted, or missing for a clean look.
Do-It-Yourself Stories from Customers like You
Lower oven would not ignite. Gary P. • Randolph , NJ • March 19, 2017
Replaced the ignitor glow bar and deflector oven (which had a hole burned through it). Screws stripped upon disassembly of original deflector oven and needed to be replaced as well.
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Ge part
By: Ge
Part Number: WB18X23942
If your gas cooktop burners won't ignite or igniters click continuously, the switch harness may be faulty. Moderate DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
No spark or red led gas cooktop working with a lighter. Devang R. • San Ramon , CA • June 23, 2022
The ordeal began after wiping around burner knobs with a moist paper towel with cleaner and wrapping the towel around the burner knob shaft to clean around it. The cooktop stopped sparking on all the 5 burners and no red LED light. There was gas flow and I could light the burner using a lighter. I looked up and found a couple of good youtube videos on troubleshooting and also came upon the AppliancePartsPros.com site. I opened the cooktop (youtube video helped) after turning off the gas supply...
Read more
More
$46.33
- Compare At:
-
$55.60
- You Save:
-
$9.27
Genuine Ge part
By: Ge
Part Number: WB3X5699
The Clock Knob Kit is an OEM replacement part for GE ranges. It contains the necessary knobs to control clock and timer functions from the control panel. This 3 pack of range clock knobs is all you need to cover one timer control. Color: Black. Each knob measures about 1/2 an inch in diameter, and 1 inch deep
Symptoms of faulty knobs include:
- Knobs no longer stay securely attached to shafts
- Issues selecting timer options or adjusting clock settings
- Incorrect rotation feel or knobs difficult to turn
- Display issues arising from loose or faulty internal connections
This GE replacement kit is also compatible with Hotpoint, RCA and some Kenmore ranges for convenient cooking.
NOTE: For chrome order WB3X459.
Do-It-Yourself Stories from Customers like You
Discolored burner rings and missing oven timer/clock knobs on 30 year old ge electric stove Edward S. • Marietta , OH • December 05, 2015
Replaced above parts, easy to do, looks like a new stove. Needed to pry open knob stem slot segments very slightly to remove broken plastic from previous knobs. Spreading stem slot metal sides too much and they will break. With slots cleaned out, pinch stem sides almost together for new knobs to slide on. Customer service rep was helpful and parts delivery was next day as promised. Before contacting Appliance Parts Pros, I found their on-line customer reviews were much better than their...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001664
The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.
Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.
Symptoms of a faulty timer knob insert include:
- Knob becomes loose, detached or inoperable for timings scrolling
- Cracks appear exposing internal timer parts
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504077
Fix i20 or i30 error codes with this dishwasher pressure sensor. Monitors water pressure to prevent overfilling. Common DIY repair for continuous filling.
Do-It-Yourself Stories from Customers like You
If yor fridgidaire dishwasher is showing an i30 error code do not assume there is a leak Kenneth T. • Vineland , NJ • April 24, 2017
I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have...
Read more
More
$83.95
- Compare At:
-
$100.74
- You Save:
-
$16.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239985
Black stainless steel control knob for gas range control panels. Replaces worn, cracked, or broken knobs with reduced grip from repeated use.
Do-It-Yourself Stories from Customers like You
Knob broke Meriwether M. • St Petersburg , FL • January 29, 2021
Bought a new knob.
Read more
More
$62.61
- Compare At:
-
$74.51
- You Save:
-
$11.90
Genuine Ge part
By: Ge
Part Number: WB03X20563
Replacement control knob for your range cooktop. Installs on the control panel to adjust burner temperature settings. Order when original is cracked, broken, or finish has peeled off.
Do-It-Yourself Stories from Customers like You
Needed replacement burner knobs. Virgie Bright E. • New York , NY • July 02, 2021
ApplicancePartsPros are OUTSTANDING.
Every person I spoke with gave super helpful tips and information, AND -
Called me to double check on an order I didn't realize I had placed in error.
I couldn't believe it.
Thank you Thank you for all you do!!
Read more
More
$27.49
- Compare At:
-
$32.71
- You Save:
-
$5.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor. Wayne K. • Stockbridge , MI • March 21, 2020
Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts.
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Ge part
By: Ge
Part Number: WB24X10205
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
$57.78
- Compare At:
-
$68.76
- You Save:
-
$10.98
Genuine Ge part
By: Ge
Part Number: WH12X10476
Fix washer overfilling or not filling properly. This pressure switch controls water level for proper washing. DIY-friendly, takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Washer was leaking water Jerry M. • Mansfield , TX • June 06, 2014
I thought initially it was a hose because it was leaking water from the bottom. On the small and medium load it didn't leak. I watched it on the large setting and noticed the water didn't shut off initially so therefore it was over filling. I ordered a switch pressure switch from Appliance Parts Pros and received it in two days. I replaced the switch, put the washer together and now it works like new. The wife is very happy to have her washer back working better than ever! Thanks!
Jerry
Read more
More
$48.22
- Compare At:
-
$56.90
- You Save:
-
$8.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 134886700
The Timer Knob Assembly is an OEM replacement part for Frigidaire electric dryers. This assembly incorporates the timer dial, stem, and mounting components that allow users to set desired drying periods.
Causes of a faulty timer knob include wear and tear of internal gears from regular cycle selections. Damage to the outer dial or stem connection points may also occur.
Symptoms include:
- Inability to rotate timer dial through full drying options
- Timer selections not initiating or maintaining set programs
- Dial detaching from the front panel during adjustment
This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, and various Kenmore dryer models as well.
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181859
The Washer Control Knob is an OEM replacement part for Whirlpool washers.
Causes of malfunctions include stripped interior gears losing secure connection to circuit boards over hundreds of wash cycles. Repeated twisting motions can also crack fragile exterior ring structures.
Symptoms consist of:
- Refusal to rotate between settings
- Missing or faded graphics impairing readability
- Inability to start or stop washer cycles as needed
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Color: Light gray used on platinum models. Measures about 1-2/3 inches in diameter. For blue order WP8181881. For dark gray used on pewter models order WP8182050.
Do-It-Yourself Stories from Customers like You
Stuck/broken start button Oladiran O. • Austin , TX • July 11, 2015
Googled it. Saw the YouTube video on replacing the User Interface module. Decided to try to fix this myself. Looked simple enough. Ordered the UI module. Saw the video on the replacement again.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10284885
Replace your cooktop's damaged or broken control knob. This knob installs on the control panel to select burner functions and temperature settings.
Do-It-Yourself Stories from Customers like You
Knob was broken on my stove top Susan O. • Las Vegas , NV • June 21, 2015
I ordered the part from Appliance Pro
Read more
More
$25.76
- Compare At:
-
$30.65
- You Save:
-
$4.89
Genuine Bosch part
By: Bosch
Part Number: 00600072
Replacement control panel button for dishwashers. Installs on the front control panel. Replace if cracked, broken, or missing from normal wear.
Do-It-Yourself Stories from Customers like You
The top plastic panel facia which houses the handle to open the door broke the panel is held on with two screws at the bottom which is a stress point and design flaw Randy E. • Hancock , ME • September 01, 2017
The parts from AppliancePartsPros.com arrived a day ahead of schedule. (I'm a big APP.com fan.) I removed the metal front door panel, then removed the broken plastic Panel-Facia which houses the handle. Because the buttons and handle trim needed to be transferred from the old Panel-Facia to the new one, I expected that, also being plastic, they may break when making the transfer, so I ordered all of those parts as well, which only drove the cost up about $32. If I broke one item in the...
Read more
More
$33.34
- Compare At:
-
$39.67
- You Save:
-
$6.33
Genuine Whirlpool part
By: Whirlpool
Part Number: W10342596
Fix a compactor that won't start when the door closes. This actuator switch kit includes a redesigned, more durable switch. DIY install in 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Actuator tab was broken this was a constant issue for the past eight years David P. • Camarillo , CA • December 19, 2014
Kitchenaid should have supplied this kit to it's customers. The kit is of a much better design than the flimsy original. Fairly easy to install.
Read more
More
$102.38
- Compare At:
-
$121.83
- You Save:
-
$19.45