Outer Ecb Parts

Looked it up on you tube found two possible problems, eliminated oven sensor, left only mother board, replaced, very simple procedure, all working well now. Read more

I needed to replace the light bulb in the oven, but forgot to turn off the breaker and unplug the oven (NEVER DO THIS)!!! There was a spark, and my control board was fried. The range top worked fine, so I knew if was the control board (if you no longer see the digital clock and none of the buttons are responsive, it's a pretty good indicator that it's toast). Simple fix. Buy this part, turn off the breaker, unplug the appliance, remove the backing from the unit, remove 4 screws, swap out the... Read more

We had to order the entire timer assembly because the part taking the most abuse is plastic. Of course. Watched the video and easily did the repair. Thanks. Read more

Timer didn’t solve problems; texted APP tech support, followed their instructions and the problems were fixed. Great experience. Read more

I was told by the person who took my order that I could find an instruction video on you tube . So I went there and follow those instructions. The repair went well although I did have a slight problem with the door latch and the soap dispenser lever. They both fell out as I was trying to install the timer, but I went back to the video and although it didn't show how to replace these two parts I was able to see how they were placed and was able to figure it out from there. The job was a complete... Read more

Repairs installed. Full test today. Install was easy. Read more

I wasn't familiar with this washer since I've never had any other problems with it. So i pulled up a assembly diagram to see how to take it a part.It was simple and only took a few minutes. Read more

Replaced control board with OEM part from ApplianceParts Pro - fit exactly and remedied the problems. Simple to replace - turn off power (circuit breaker), remove internal door panel, remove control board cover and unplug wires/LED leads (the LED lead connectors on the board have a square tension slip ring around them that hold the leads - just pull these up away from board and they will release the leads) and then remove the controller board housing. The controller board is held into the... Read more

PROBLEM - MY LG RANGE (LRE3091ST) STARTED TO HEAT BUT WOULD NOT GET TO THE FULL TEMP, IT SHUT OFF & GAVE US AN F-11 CODE. I REMOVED THE BAKE HEATING ELEMENT & OVEN SENSOR TO SEE IF THEY WERE WORKING PROPERLY. (YOUTUBE CAN SHOW YOU HOW TO DO THIS) THEY WERE WORKING FINE. SO I ORDERED THE CONTROL BOARD. MY HUSBAND REPLACED IT VERY QUICKLY& THE OVEN IS HEATING UP BETTER THAN BEFORE! GREAT PRICE - VERY FAST SHIPPING! Read more

I did a little research on the internet. I check to make sure it was getting power with Ohm meter. I took the front panel off to see what I could find. I found 2 dead roaches in the control board box and there was some brown stuff on the control board. I checked the price to replace the part online and local. AppliancePartsPros had the best price and return policy. I figured I had nothing to lose be trying the part out to see if it would work. I installed the new board and it was alive again.... Read more

Very easily!! Although the stove in the video was a different setup then ours , it worked. We took the face of the stove off, took out the 9 screws holding it on. Checked the wire attachments against the new unit and plugged in in. The only thing I wished I'd known, the actual face( with the words oven etc.on it) needed to be peeled from the original unit. It came off pretty good and is usable but would have been nice to have a new one. Read more

• Timer will not advance

Replaced the main timer / control. Read more

This couldn't have been simpler! Removed the glass panel by taking out 4 screws on the bottom that were accessed by opening the oven door. Lifted up, then pulled the panel forward, released one electrical connection, and the panel was disconnected and could be laid on a flat surface. Unscrewed the four nut screws on the old control board with a socket set (you could use a small wrench, but it would be tedious), un-clipped the wide ribbon connection ( had to pry it off very gently to avoid... Read more

Called appliance parts pros because I couldn't find it on their website talked to an associate it didn't take 5 minutes and the part was ordered! It was delivered very quickly and was the exact same as the old one! It was a very pleasant experience! Read more

The most challenging part of this was determining what the problem was. At first I thought the clutch (or related parts) had worn out, but by chance, I pulled on the timer knob, and the machine started spinning. When I let it go, it stopped. So clearly the spinning part worked. Then I watched a few videos about repairing a bad timer and determined that it was the likely culprit. I ordered the part. It was very simple to replace. And it worked perfectly. Saved me hundreds either in... Read more

I had ordered several parts from Appliance Pros and installed parts that did not solve the problem. Return the parts and was going to give up. Called Appliance Pros Tech and she suggested that I try installing a User Interface Board. She sent me the new board and problem solved. Dishwasher working like new. Read more