Power Strike Small Engine Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WR09X10107
Refrigerator won't cool or compressor won't start? This compressor start relay and overload powers the compressor during cooling cycles. DIY repair.
Do-It-Yourself Stories from Customers like You
Burning actual flame coming out of 5sp overload/ptc Rick C. • Dover , DE • February 03, 2015
We isolated a burning smell in our kitchen to our refrigerator, GE Profile PSS23MGTCCC which we purchased in November of 2006. This occurred at 3AM on 29 January 2015 and I am thankful that my wife got me up to investigate this odor. I unplugged the refrigerator.
I plugged the refrigerator back in at 6AM thinking it had time to cool. The burning smell happened immediately and I unplugged the refrigerator again right away.
My son in-law looked up some possible issues that could have...
Read more
More
Genuine Ge part
By: Ge
Part Number: WC21X20249
The Return Switch is an OEM part for GE trash compactors. This part ensures that the compacting ram returns to its starting position after each compaction cycle.
Causes of a malfunctioning return switch can vary from electrical issues, such as short circuits or worn-out connections, to mechanical problems, including physical damage from wear and tear or blockages preventing the switch's activation.
Symptoms of a faulty Return Switch include:
- The compactor ram fails to return to its original position after a compaction cycle.
- The unit does not start or operate correctly, indicating issues with the cycle initiation.
- Unusual noises or behavior from the trash compactor, suggesting that the ram is not aligning or moving as expected.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The trash compactor would not cycle without me holding kick plate up for whole cycle when it did get back to the top of the cycle it would only stop if i opened the door Mike D. • Pine Mountain , GA • December 15, 2014
TALKED TO YOUR REPRESENTATIVE AND WE WENT THROUGH ALL THE ON/OFF AND LIMIT SWITCHS. NARROWED IT DOWN TO TWO SWITCHS. THE ON/OFF SWITCH AND THE LIMIT SWITCH ON THE DOWN CYCLE SIDE. REPLACED ON/OFF AND DETERMINED THAT THAT WAS NOT THE ISSUE. THEN UNCOVERED LIMIT SWITCHS AND REPLACE DOWN SWITCH, FIXING THE PROBLEM
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10411934
Fix burners stuck on high or heating out of control with this infinite switch. Controls single, dual, or triple element burners. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00422748
The Potentiometer is an OEM replacement part for Bosch gas range or cooktops. It functions as a three-terminal resistor that adjusts the flow of electric current, which in turn, controls the ignition and temperature of the cooktop. This component is essential for the precise operation and control of the gas burners, ensuring they light up and maintain the desired flame intensity.
Causes of a malfunctioning Potentiometer can be attributed to wear and tear, electrical issues, or damage due to spills and cleaning products. A compromised potentiometer affects the flow of electric current, leading to issues with the ignition and temperature control of the gas burners.
Symptoms of a bad Potentiometer include:
- The cooktop not lighting or staying lit
- The ignitor continuously clicking without igniting the burner
- Inability to adjust the flame intensity or temperature accurately
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One burner on my thermador cooktop (pcs484ccus) would not light Kinn K. • Haslet , TX • June 08, 2015
After watching a youtube video, I disassembled the front cover on the cooktop (be sure to turn off the power supply). I then switched the potentiometers on two burners. The burner that was not working now worked and the burner that did work did not. Easy to find the culprit....ordered a new potentiometer from here and though I only got regular shipping, it was actually delivered the NEXT DAY! 5 minutes, put in the new part, and all burners work. Great site, thanks for the help!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor. Wayne K. • Stockbridge , MI • March 21, 2020
Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10498
Fix a washer that won't fill with hot or cold water. This rotary temperature switch controls water temperature settings. Easy 5-minute DIY repair.
This part fixes the following symptoms
-
No hot or cold water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
No hot water would fill the washer in any cycle or temperature setting if the temperature setting was set to "hot" absolutely nothing would happen when turned on (cold washes worked fine) William H. • St Louis , MO • December 30, 2014
Replaced the water temperature selector switch. After watching a YouTube video for our GE top loading washer showing the switch replacement, I replace the switch in under 5 minutes! Very easy!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10563095
Dryer won't start when you press the button? This push to start switch initiates the motor and heating element. Simple 5-minute DIY replacement.
Do-It-Yourself Stories from Customers like You
Would not start Charles Y. • Auburn , NY • June 19, 2018
Replaced the start s/w
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813601
The Door Switch is an OEM part for Frigidaire dryers. This part ensures that the dryer operates safely by only allowing the machine to run when the door is completely closed. Positioned typically at the door frame, the switch activates when the door is shut, signaling the control system that it's safe to begin the cycle.
Over time, door switches can wear out or become damaged, which can interfere with the normal operation of the dryer.
Symptoms of a faulty Door Switch include:
- The dryer not starting when the door is closed.
- The dryer stopping unexpectedly, which might be due to a loose or faulty switch.
- A lack of the usual "click" sound that indicates the door has latched properly, suggesting the switch isn’t engaging.
- The dryer continuing to run when the door is opened, which poses a significant safety risk.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer will start, run for a few second, then turn off. No error codes John M. • Waikoloa , HI • April 03, 2014
By reading the forums I first thought it may be the thermostat. I bypassed the thermostat wiring and the dryer still turned off after a few second of running. The second check was for the door switch. I couldn't find an explanation of how to bypass, so I just ordered a new one to try. It worked.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11315637
Washer won't start or door won't unlock? This lock cam drives the door lock mechanism to secure and release the door for proper cycle operation.
Do-It-Yourself Stories from Customers like You
Door switch is broken Lan T. • Lawrence , MA • August 05, 2014
We have a corn-operation washer machine for my renter home that we took it over when we bough the property, When it broke we have no key. I order key as well as parts, and they come at no time. It is amazing, with the videos my husband was able to fix it, it save me a lot of money
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10276
Washer won't spin or agitate? A faulty lid switch magnet may be the cause. This part signals the switch that the lid is closed. Easy 20-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Bad lid switch on a ge washer wouldn't agitate or spin David C. • Saline , MI • October 26, 2015
Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 99002254
Fix a dishwasher that stops mid-cycle or won't start without holding the door closed. This latch assembly secures the door and activates switches.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher would not complete or start its cycle without applying constant pressure to the door Wayne M. • Newark , DE • November 18, 2014
Discovered that the common cause of the problem was the latch in the door. Found a video online that showed the exact procedure for my model dishwasher. Ordered the part from AppliancePartsPros on a Thursday afternoon and it was in my hands by noon on Friday. Carefully took the door apart, compared parts, reassembled, and the joy on my wife's face was priceless when the dishwasher started up without doing anything special. Do not be afraid to attempt this repair.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11120795
Fix a burner that won't heat, stays hot, or can't adjust temperature. This infinite switch controls power levels. Simple DIY repair in 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Stem broke off on surface unit switch Robert Z. • Hampstead , MD • July 09, 2016
Replaced switch with a new one. also replaced the 4 knobs
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X26216
Dryer not heating properly or overheating? This thermostat regulates temperature to keep your dryer running safely. Simple DIY fix in under an hour.
Do-It-Yourself Stories from Customers like You
No heat no code Wayne R. • Cabot , PA • July 21, 2026
This was a friends dryer. They'd been quoted a $200 call out fee and after taking with them on the phone were also told they could have the dryer taken away for $150. I told my friends that inwould fix it. I used a multimeter to check the thermostats, heaterbelement and funrion dial. I found 2 bad thermostats. I orderd one part from you, another from elsewhere as you did not have stock. I replaced the dead parts with new and the dryer heats again. It cost me $65 total in parts and shipping to...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137116700
This high limit thermostat is a safety device that monitors the temperature inside the dryer and cuts power to the heating element if the temperature exceeds a safe threshold. It is typically mounted on the heating element housing or exhaust duct. Replace this thermostat if the dryer is not heating at all or if it overheats - a tripped high limit thermostat often indicates a clogged vent or restricted airflow that should also be addressed.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer error e66 then door open Nolan R. • Hoboken , NJ • February 06, 2017
My Electrolux Frigidaire Gas Dryer stopped working and I got an error code E66 that the thermal limiter blew from over heating. The E66 code stops displaying after the initial code and you will then get a door open message. I replaced the thermal limiter and the thermostat just to be sure which part at the problem. The job is hard because you have to take apart the entire dryer and remove the drum. Would be a tough project to complete on your own.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11545764
Fix dishwasher overflow or no-fill issues with a float switch replacement. Detects water levels and prevents floods. Simple repair for most DIYers.
Do-It-Yourself Stories from Customers like You
H20 Steven Y. • North Las Vegas , NV • September 04, 2026
Tested float and input valve ohms both out of range replaced both parts units 3 years old
Both parts did not fix problem
Read more
More
Genuine Ge part
By: Ge
Part Number: WH01X10626
Washer won't start or spin? This lid lock magnet triggers the safety sensor to confirm the lid is closed. Simple DIY fix restores normal operation.
More