Long Lite Small Engine Safety Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304524331
Interior light stays on or won't turn on? This upright freezer door switch controls lighting when the door opens and closes. Simple fix for most DIYers.
More
$58.55
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 134422700
This is a factory switch used in the appliance's control/safety circuit. Replacing a worn or failed switch restores reliable signaling so the selected function engages properly and the unit responds consistently to user inputs and status conditions.
- Provides an electrical on/off signal to the control or safety circuit
- If faulty, selected functions may not activate or may be intermittent
- Can trigger error codes related to a switch input, depending on model
What's included: 1 switch Install notes:
- Disconnect power before servicing; turn off gas/water if applicable
- Note/photograph wire locations and transfer connectors one at a time
- Verify actuator alignment and secure mounting before reassembly
- After installation, run a test cycle to confirm proper operation
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
The stem of the original switch had been twisted off Benjamin R. • Seattle , WA • April 15, 2019
I removed two sheet metal screws to remove the panel above the washing machine lid. That exposed four more phillips drive sheet metal screws, after removing those the dashboard control panel is held by two smaller black screws slightly recessed in the lower corners. This allowed the panel to be pulled down from the top, revealing the back of the switch. At this point I took a picture of the wiring connections with my cell phone to make sure I put them on the new switch in the same...
Read more
More
$88.36
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Broan part
By: Broan
Part Number: S97011238
Fan or light not responding? Intermittent operation or loose controls? This range hood switch restores reliable on/off control. Simple DIY fix.
Do-It-Yourself Stories from Customers like You
Kitchen downdraft unit not functioning Melvin S. • Spring Valley , CA • June 24, 2014
Called a close friend, does all or most repairs around home for years. Dismantled downdraft unit and discovered a bad switch. Was able to ascertain part number and manufacturer. One phone call managed to locate part in stock. Ordered and part arrived in express time!. Friend came yesterday, installed part and put assembly back together. Unit works like new. Great thanks for all the help from Appliance Parts Pros.
Read more
More
$50.26
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WB23K34829
The Infinite Switch is an OEM part for GE electric ranges. It regulates precise temperature settings for the bake and surface elements. This is specifically for 6" inch elements.
Symptoms of a bad infinite switch include:
- Wide variations in cooking temperatures
- Failure to attain or maintain desired heat levels
- Non-working or faulty temperature selector dial
Causes can involve degraded metal contacts, worn internal components, or damaged wiring connections after extended use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore electric range models.
Do-It-Yourself Stories from Customers like You
We couldn't control the burner temperature. Steven A. • New Carlisle , OH • December 20, 2021
The parts are under the stovetop and the knobs are attached to them. We bought the correct ones from AppliancePartsPros, these were the correct ones. Seems we have an oddball stovetop. It's a GE drop in stove. The parts were easy to change. It was a simple matter of putting the wires on the new switch in the same place there were on the switch. I took phone pics of the wire locations before I took them off and only did one switch at a time. Turn the power off at the breaker panel first of...
Read more
More
$56.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 241835505
Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.
More
$70.36
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219019
This wiring harness routes power and control signals between key components inside your range or wall oven. Replace a damaged harness to restore safe, reliable operation and prevent intermittent heat, shorts, or non-working burners and oven functions.
- Distributes electrical power and signals between controls, switches, heating elements/igniters, and safety components
- Maintains correct connector orientation and wire routing for dependable operation
- Typical symptoms: no heat in oven or on surface burners, intermittent operation, breaker tripping, or visible burnt/melted wiring
- Restores stable connections to reduce arcing and overheating
What's included: One wiring harness assembly. Install notes:
- Disconnect power at the circuit breaker; for gas ranges, also shut off the gas supply
- Label or photograph all connections and transfer one wire at a time to avoid miswiring
- Route the harness exactly as original; keep away from sharp edges and hot surfaces; secure with existing clips/ties
- If connectors don't match or any terminals are heat-damaged, stop and inspect mating components.
Do-It-Yourself Stories from Customers like You
One of the stove controls would not lite the burner. Duane F. • Roulette , PA • March 17, 2019
I replaced the wiring harness and the stove worked like new again.
Read more
More
$75.59
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Broan part
By: Broan
Part Number: S97009972
Restore dependable control with this replacement switch. It replaces a worn or unresponsive control so your unit responds consistently when operated, helping eliminate intermittent operation and no-response issues caused by fatigued contacts or mechanical wear. What it does
- Controls electrical power to the selected function within the unit
- Can resolve symptoms like no response, intermittent operation, or a switch that sticks or feels loose
- Installs in the original control location for a straightforward replacement
What's included
Install notes
- Disconnect power at the breaker before servicing
- Access the control area and note wire locations or take a clear photo
- Move wires one at a time to the new switch; ensure spade terminals are fully seated
- Test operation before reassembling covers or panels
More
$84.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: W11036551
This is a small electrical switch mounted near the dryer door opening that detects whether the door is open or closed. It completes the circuit that allows the dryer to run when the door is shut. Replace this switch if your dryer won't start, stops mid-cycle, or runs with the door open.
Do-It-Yourself Stories from Customers like You
Problem started with dryer not getting hot and eventually shutting off within 5 minutes of operation. Meynardo G. • Orange Park , FL • March 22, 2022
I used Google and YouTube to search for troubleshooting videos and ordered the parts through AppliancePartsPros.com. I watched the repair videos on parts replacement and found it very helpful. Got it done in about an hour and tested it. It works!!!!!
Read more
More
$48.46
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Lg part
By: Lg
Part Number: EBF61314813
If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.
More
$34.75
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011243
Burner stuck on high or won't heat? The infinite switch controls surface element power from low to high. Common DIY fix restores heat adjustment.
Do-It-Yourself Stories from Customers like You
No control of range burner burner was either off or on high no heat adjustment Robert B. • Toms River , NJ • September 06, 2014
Replaced infinite switch
Read more
More
$73.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3356467
Washer won't fill properly or overfills? This water level pressure switch senses fill levels and signals when to stop. Easy DIY fix for cycle timing issues.
Do-It-Yourself Stories from Customers like You
Wash machine once in a while would stop running Daniel B. • Leesburg , FL • May 13, 2016
I found that turning the water level switch back and forth would activate the machine So I replaced the water level switch and the plastic hose that connected to it.
I purchased a clamp in the purchase, but it was the wrong size! There wasn't a clamp used in the original set up, so I installed the switch and hose without it! It was the video instructions and having the correct parts that made that made this a easy repair!
Thank You
Read more
More
$108.40
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215034
Fixes dual burner stuck on high, won't heat, or no inner ring control. This infinite switch restores precise temperature selection. 45-60 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Burner didn't turn on Bruce H. • Granger , IN • August 18, 2015
I replaced both the element and the switch. It was a relatively easy fix, although I needed a second set of hands to hold the stovetop upright while I did the replacement. The entire job took about 45-60 minutes.
Read more
More
$161.78
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002121
If your cooktop burner only works on high or won't adjust temperature, the infinite switch likely failed. DIY-friendly repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Right front double burner only worked on high!!!! Rolland F. • Brasher Falls , NY • September 21, 2014
Ordered the part and a few days later it arrived and I turned off the power and took a few screws out and unpluged the old one and pluged in the new .. Works like a charm.. Was very easy to fix....
Read more
More
$79.74
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762000
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer would stop after about 30 second on fill cycle diagnostic code of e32 Kenneth B. • Friendswood , TX • June 04, 2016
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking...
Read more
More
$91.31
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Samsung part
By: Samsung
Part Number: DA34-10120E
Refrigerator light not turning on when door opens? The door switch detects door position to control interior lighting. Simple DIY replacement.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
More
$48.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 154852501
This is the user control and display board located on the front panel of the dishwasher. It contains the buttons, display, and interface circuitry that allow you to select wash cycles, options, and monitor cycle status. Replace this board if the display is blank or flickering, buttons are unresponsive, or the dishwasher does not respond to cycle selections.
Do-It-Yourself Stories from Customers like You
Dishwasher electronics experiencing intermittent failures then complete failure i had power to the control board but no lights on panel etc Stephen H. • Fort Lauderdale , FL • July 12, 2016
I spoke with one of your sales people... ordered the control board and also the button board... ( for $50.00 , I'll replace it too while I'm in there ) .. The boards were here the next day, I installed them and the machine works better than ever ! Easy fix... outstanding sales lady, immediate delivery.
Read more
More
$113.95
IN STOCK
Most orders arrive by Tuesday, November 24